212
Views
10
CrossRef citations to date
0
Altmetric
Articles

Unburnt carbon and ashing behavior for slow burning of lignite under oxygen-enriched combustion conditions

, & ORCID Icon
Pages 1326-1335 | Received 31 May 2018, Accepted 08 Oct 2018, Published online: 16 Nov 2018

References

  • Arias, B., C. Pevida, F. Rubiera, and J. J. Pis. 2008. Effect of biomass blending on coal ignition and burnout during oxy-fuel combustion. Fuel 87:2753–59. doi:10.1016/j.fuel.2008.01.020.
  • Bejarano, P. A., and Y. A. Levendis. 2008. Single-coal-particle combustion in O2/N2 and O2/CO2 environments. Combustion and Flame 153:270–87. doi:10.1016/j.combustflame.2007.10.022.
  • Bilen, M., and S. Kizgut. 2016. Modeling of unburned carbon in fly ash and importance of size parameters. Fuel Processing Technology 143:7–17. doi:10.1016/j.fuproc.2015.10.039.
  • Bjurström, H., B. B. Lind, and A. Lagerkvist. 2014. Unburned carbon in combustion residues from solid biofuels. Fuel 117:890–99. doi:10.1016/j.fuel.2013.10.020.
  • Buhre, B. J. P., L. K. Elliott, C. D. Sheng, R. P. Gupta, and T. F. Wall. 2005. Oxy-fuel combustion technology for coal-fired power generation. Progress in Energy and Combustion Science 31:283–307. doi:10.1016/j.pecs.2005.07.001.
  • Fryda, L., C. Sobrino, C. Bertrand, and M. Cieplik. 2012. Study of ash deposition during coal combustion under oxyfuel conditions. Fuel 92:1–10. doi:10.1016/j.fuel.2011.08.013.
  • Fryda, L., C. Sobrino, M. Cieplik, and W. L. van de Kamp. 2010. Study on ash deposition under oxyfuel combustion of coal/biomass blends. Fuel 89:1889–902. doi:10.1016/j.fuel.2009.11.022.
  • Konist, A., A. Valtsev, L. Loo, T. Pihu, M. Liira, and K. Kirsimäe. 2015. Influence of oxy-fuel combustion of Ca-rich oil shale fuel on carbonate stability and ash comp. Fuel 139:671–77. doi:10.1016/j.fuel.2014.09.050.
  • Krishnamoorthy, G., and J. M. Veranth. 2003. Computational modeling of CO/CO2 ratio inside single char particles during pulverized coal combustion. Energy and Fuels 17:1367–71. doi:10.1021/ef030006k.
  • Li, G., S. Li, M. Dong, Q. Yao, C. Y. Guo, and R. L. Axelbaum. 2013. Comparison of particulate formation and ash deposition under oxy-fuel and conventional pulverized coal combustions. Fuel 106:544–51. doi:10.1016/j.fuel.2012.10.035.
  • Murphy, J. J., and C. R. Shaddix. 2006. Combustion kinetics of coal chars in oxygen-enriched environments. Combustion and Flame 144:710–29. doi:10.1016/j.combustflame.2005.08.039.
  • Ptasinski, K. J. 2016. Efficiency of biomass energy, 204. New Jersey: John Wiley & Sons.
  • Roy, B., and S. Bhattacharya. 2016. Ash characteristics during oxy-fuel fluidized bed combustion of a Victorian brown coal. Powder Technology 288:1–5. doi:10.1016/j.powtec.2015.10.036.
  • Saito, M., M. Sakadata, M. Sato, T. Soutome, and H. Murata. 1991. Combustion rates of pulverized coal particles in high-temperature/high-oxygen concentration atmosphere. Combustion and Flame 87:1–12. doi:10.1016/0010-2180(91)90022-4.
  • Seepana, S., and S. Jayanti. 2012. Optimized enriched CO2 recycle oxy-fuel combustion for high ash coals. Fuel 102:32–40. doi:10.1016/j.fuel.2009.04.029.
  • Shaddix, C. R., and J. J. Murphy. 2003. Coal char combustion reactivity in oxy-fuel applications. Paper presented at the 20th Pittsburgh Coal Conference, Pittsburgh, September 15.
  • Sheng, C., and Y. Li. 2008. Experimental study of ash formation during pulverized coal combustion in O2/CO2 mixtures. Fuel 87:1297–305. doi:10.1016/j.fuel.2007.07.023.
  • Sheng, C., Y. Lu, X. Gao, and H. Yao. 2007. Fine ash formation during pulverized coal combustion – A comparison of O2/CO2 combustion versus air combustion. Energy and Fuels 21:435–40. doi:10.1021/ef060420v.
  • Simmonds, M., I. Miracca, and K. Gerdes. 2005. Oxyfuel technologies for CO2 capture: A techno-economic overview, vol.II. In Greenhouse gas control technologies, ed. M. Wilson, T. Morris, J. Gale, and K. Thambimuthu, 1125–30. New York, NY: Elsevier.
  • Suriyawong, A., M. Gamble, M. H. Lee, R. Axelbaum, and P. Biswas. 2006. Submicrometer particle formation and mercury speciation under oxygen–Carbon dioxide coal combustion. Energy and Fuels 20:2357–63. doi:10.1021/ef060178s.
  • Varhegyi, G., P. Szabo, E. Jakab, and F. Till. 1996. Mathematical modelling of char reactivity in Ar–O2 and CO2–O2 mixtures. Energy and Fuels 10:1208–14. doi:10.1021/ef950252z.
  • Varhegyi, G., and F. Till. 1999. Comparison of temperature-programmed char combustion in CO2–O2 and Ar–O2 mixtures at elevated pressure. Energy and Fuels 13:539–40. doi:10.1021/ef980159l.
  • Wall, T., Y. Liu, C. Spero, L. Elliott, S. Khare, R. Rathnam, F. Zeenathal, B. Moghtaderi, B. Buhre, C. Sheng, et al. 2009. An overview on oxyfuel coal combustion—State of the art research and technology development. Chemical Engineering Research and Design 87:1003–16. doi:10.1016/j.cherd.2009.02.005.
  • Wang, H., Z. M. Zheng, L. Yang, X. L. Liu, S. Guo, and S. H. Wu. 2015. Experimental investigation on ash deposition of a bituminous coal during oxy-fuel combustion in a bench-scale fluidized bed. Fuel Processing Technology 132:24–30. doi:10.1016/j.fuproc.2014.12.021.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.