Effect of renewable fuel and injection strategies on combustion characteristics and gaseous emissions in diesel engines

References

• Agarwal, A. K. D., . A., D. K. Srivastava, R. K. Maurya, and A. P. Singh. 2013. Effect of fuel injection pressure on diesel particulate size and number distribution in a CRDI single cylinder research engine. Fuel 107:84–89. doi:10.1016/j.fuel.2013.01.077.
   Web of Science ®Google Scholar
• Alla, G. H., H. A. Soliman, O. H. Badr, and M. F. Rabbo. 2002. Effect of injection timing on the performance of diesel engine. Energy Conversion and Management 43:269–77. doi:10.1016/S0196-8904(00)00168-0.
   Web of Science ®Google Scholar
• Atmanlı, A., B. Yüksel, and E. Ileri. 2013. Experimental investigation of the effect of diesel–Cotton oil–N-butanol ternary blends on phase stability, engine performance and exhaust emission parameters in a diesel engine. Fuel 109:503–11. doi:10.1016/j.fuel.2013.03.012.
   Web of Science ®Google Scholar
• AVL. 2011. Pressure sensor for combustion analysis – data sheet GH13P [Internet]. Accessed November 3, 2015. https://www.avl.com/documents/10138//885983//AT3368E_GH13P.pdf.
   Google Scholar
• Bakar, R. A., and A. R. Ismail. 2008. Fuel injection pressure effect on performance of direct injection diesel engines based on experiment. AmericanJournalofAppliedSciences 5 (3):197–202.
   Google Scholar
• Bakenhus, M., and R. D. Reitz. 1999. Two-color combustion visualization of single and split injections in a single-cylinder heavy-duty DI diesel engine using an endoscope-based imaging system. SAE Technical Paper.
   Google Scholar
• Bannikov, M. G., and J. A. Chattha. 2015. Combustion and emissions characteristics of jatropha methyl esters in a direct injection diesel engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 37 (7):696–704. doi:10.1080/15567036.2011.592911.
   Web of Science ®Google Scholar
• Desantes, J., V. Bermúdez, J. V. Pastor, and E. Fuentes. 2006. Investigation of the influence of post-injection on diesel exhaust aerosol particle size distributions. Aerosol Science and Technology 40 (1):80–96. doi:10.1080/02786820500466583.
   Web of Science ®Google Scholar
• Devarajan, Y. 2018. Experimental evaluation of combustion, emission and performance of research diesel engine fuelled Di-methyl-carbonate and biodiesel blends. Atmospheric Pollution Research, Madanapalle Institute of Technology and Sciences, Madanapalle, India.
   Google Scholar
• Fayad, M. A., D. Fernández-Rodríguez, J. M. Herreros, M. Lapuerta, and A. Tsolakis. 2018. Interactions between aftertreatment systems architecture and combustion of oxygenated fuels for improved low temperature catalysts activity. Fuel 229:189–97. doi:10.1016/j.fuel.2018.05.002.
   Web of Science ®Google Scholar
• Fayad, M. A., J. M. Herreros, F. J. Martos, and A. Tsolakis. 2015. Role of alternative fuels on particulate matter (PM) characteristics and influence of the diesel oxidation catalyst. Environmental Science & Technology 49 (19):11967–73. doi:10.1021/acs.est.5b02447.
   PubMed Web of Science ®Google Scholar
• Fayad, M. A., A. Tsolakis, D. Fernández-Rodríguez, J. M. Herreros, F. J. Martos, and M. Lapuerta. 2017. Manipulating modern diesel engine particulate emission characteristics through butanol fuel blending and fuel injection strategies for efficient diesel oxidation catalysts. Applied Energy 190:490–500. doi:10.1016/j.apenergy.2016.12.102.
   Web of Science ®Google Scholar
• Ganapathy, T., R. P. Gakkhar, and K. Murugesan. 2011. Influence of injection timing on performance, combustion and emission characteristics of Jatropha biodiesel engine. Applied Energy 88 (12):4376–86. doi:10.1016/j.apenergy.2011.05.016.
   Web of Science ®Google Scholar
• Guerrassi, N., and P. Dupraz. 1998. A common rail injection system for high speed direct injection diesel engines. SAE Technical Paper, 0148–7191. doi:10.4271/980803.
   Google Scholar
• Heywood, J. B. 1988. Internal combustion engines fundamentals, ISBN 0-07-100499-8‎. USA: McGraw-Hill.
   Google Scholar
• How, H. G., H. H. Masjuki, M. A. Kalam, and Y. H. Teoh. 2018. Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. Fuel 213:106–14. doi:10.1016/j.fuel.2017.10.102.
   Web of Science ®Google Scholar
• Jayashankara, B., and V. Ganesan. 2010. Effect of fuel injection timing and intake pressure on the performance of a DI diesel engine - a parametric study using CFD. Energy Conversion and Management 51:1835–48. doi:10.1016/j.enconman.2009.11.006.
   Web of Science ®Google Scholar
• Joshi, H. C. 2003. Biodiesel from Jatropha – an alternative fuel for the future. Scientific Research Magazine, National Research Development Corporation.
   Google Scholar
• Lapuerta, M., R. García-Contreras, J. Campos-Fernández, and M. P. Dorado. 2010. Stability, lubricity, viscosity, and cold-flow properties of alcohol-diesel blends. Energy & Fuels : an American Chemical Society Journal 24 (8):4497–502. doi:10.1021/ef100498u.
   Web of Science ®Google Scholar
• Lapuerta, M., J. M. Herreros, L. L. Lyons, R. García-Contreras, and Y. Briceño. 2008. Effect of the alcohol type used in the production of waste cooking oil biodiesel on diesel performance and emissions. Fuel 87 (15):3161–69. doi:10.1016/j.fuel.2008.05.013.
   Web of Science ®Google Scholar
• Li, Z. S. C., J. Song, G. Lv, S. Dong, and Z. Zhao. 2011. Evolution of the nanostructure, fractal dimension and size of in-cylinder soot during diesel combustion process. Combustion and Flame 158 (8):1624–30. doi:10.1016/j.combustflame.2010.12.006.
   Web of Science ®Google Scholar
• Liu, Y., Q. Tu, G. Knothe, and M. Lu. 2017. Direct transesterification of spent coffee grounds for biodiesel production. Fuel 199:157–61. doi:10.1016/j.fuel.2017.02.094.
   Web of Science ®Google Scholar
• Menkiel, B. D., . A., R. Uitz, R. Cracknell, and L. Ganippa. 2012. Measurement of in-cylinder soot particles and their distribution in an optical HSDI diesel engine using time resolved laser induced incandescence (TR-LII). Combustion and Flame 159 (9):2985–98. doi:10.1016/j.combustflame.2012.03.008.
   Web of Science ®Google Scholar
• Nabi, N., M. Z. Shahadat, S. Rahman, and R. A. Beg. 2004. Behavior of diesel combustion and exhaust emission with neat diesel fuel and diesel- biodiesel blends. Powertrain & Fluid Systems Conference & Exhibition, Tampa, FL, 01–3034, SAE Technical Paper, Rajshahi University of Engineering and Technology.
   Google Scholar
• Neer, A., and U. O. Koylu. 2006. Effect of operating conditions on the size, morphology, and concentration of submicrometer particulates emitted from a diesel engine. Combustion and Flame 146 (1–2):142–54. doi:10.1016/j.combustflame.2006.04.003.
   Web of Science ®Google Scholar
• Nehmer, D. A., and R. D. Reitz. 1994. Measurement of the effect of injection rate and split injections on diesel engine soot and NOx emissions. SAE Technical Paper. doi:10.3168/jds.S0022-0302(94)77044-2
   Google Scholar
• Nwafor, O. M. I., G. Rice, and A. I. Ogbonna. 2000. Effect of advanced injection timing on the performance of rapeseed oil in diesel engines. Renewable Energy 21:433–44. doi:10.1016/S0960-1481(00)00037-9.
   Web of Science ®Google Scholar
• O’Connor, J., and M. Musculus. 2013. Post injections for soot reduction in diesel engines - a review of current understanding. SAE Technical Paper, 01–0917.
   Google Scholar
• Ozsezen, A. N., M. Canakci, A. Turkcan, and C. Sayin. 2008. Effects of Biodiesel from used frying palm oil on the performance, injection, and combustion characteristics of an indirect injection diesel engine. Energy & Fuels : an American Chemical Society Journal 22:1297–305. doi:10.1021/ef700447z.
   Web of Science ®Google Scholar
• Park, S. H., I. M. Youn, and C. S. Lee. 2011. Influence of ethanol blends on the combustion performance and exhaust emission characteristics of a four-cylinder diesel engine at various engine loads and injection timings. Fuel 90:748–55. doi:10.1016/j.fuel.2010.08.029.
   Web of Science ®Google Scholar
• Parlak, A., H. Yasar, C. Hasimoglu, and A. Kolip. 2005. The effects of injection timing on NOx emissions of a low heat rejection indirect diesel injection engine. Applied Thermal Engineering 25:3042–52. doi:10.1016/j.applthermaleng.2005.03.012.
   Web of Science ®Google Scholar
• Payri, F., J. Benajes, J. Arregle, and J. M. Riesco. 2006. Combustion and exhaust emissions in a heavy-duty diesel engine with increased premixed combustion phase by means of injection retarding. Oil & Gas Science and Technology 61:247–58. doi:10.2516/ogst:2006018x.
   Google Scholar
• Pickett, L. M. S., and D. L. Siebers. 2004. Soot in diesel fuel jets: Effects of ambient temperature, ambient density, and injection pressure. Combustion and Flame 138 (1–2):114–35. doi:10.1016/j.combustflame.2004.04.006.
   Web of Science ®Google Scholar
• Pico Technology. 2011. 8 channel thermocouple - data logger [Internet]. Accessed November 3, 2016. https://www.picotech.com/data-logger/tc-08/thermocouple-data-logger
   Google Scholar
• Poorghasemi, K., F. Ommi, H. Yaghmaei, and A. Namaki. 2012. An investigation on effect of high pressure post injection on soot and NO emissions in a DI diesel engine. Journal of Mechanical Science and Technology 26 (1):269–81. doi:10.1007/s12206-011-1009-4.
   Web of Science ®Google Scholar
• Qi, D., M. Leick, Y. Liu, and C. F. F. Lee. 2011. Effect of EGR and injection timing on combustion and emission characteristics of split injection strategy DI-diesel engine fueled with biodiesel. Fuel 90 (5):1884–91. doi:10.1016/j.fuel.2011.01.016.
   Web of Science ®Google Scholar
• Raeie, N., S. Emami, and O. K. Sadaghiyani. 2014. Effects of injection timing, before and after top dead center on the propulsion and power in a diesel engine. Propulsion and Power Reasearch 3 (2):59–67. doi:10.1016/j.jppr.2014.06.001.
   Google Scholar
• Sayin, C., and M. Canakci. 2009. Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine. Energy Conversion and Management 50:203–13. doi:10.1016/j.enconman.2008.06.007.
   Web of Science ®Google Scholar
• Sayin, C., M. Ilhan, M. Canakci, and M. Gumus. 1998. Effect of injection timing on the exhaust emissions of a diesel engine using diesel–methanol blends. Renewable Energy 34:1261–69. doi:10.1016/j.renene.2008.10.010.
   Google Scholar
• Sayin, C., I. Kilicaslan, M. Canakci, and N. Ozsezen. 2005. An experimental study of the effect of octane number higher than engine requirement on the engine performance and emissions. Applied Thermal Engineering 25:1315–24. doi:10.1016/j.applthermaleng.2004.07.009.
   Web of Science ®Google Scholar
• Siddappa, S. B., and M. K. Gajendra Babu. 2007. Studies on performance and exhaust emissions of a CI engine operating on diesel and diesel biodiesel blends at different injection pressures and injection timings. ASAE Techinal Paper, 01–0613, doi:10.4271/2007-01-0613.
   Google Scholar
• Stone, R. 1999. Introduction to internal combustion engines. 3rd. Warrendale, PA: Society of Automotive Engineers, Inc. ISBN: 978-0-7680-0495-3.
   Google Scholar
• Sugiyama, G., H. Ryu, and S. Kobayashi. 1994. Computational simulation of diesel combustion with high pressure fuel injection. International Symposium COMODIA. doi:10.3168/jds.S0022-0302(94)77044-2
   Google Scholar
• Sukjit, E., J. M. Herreros, K. D. Dearn, R. Garcia-Contreras, and A. Tsolakis. 2012. The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol -diesel blends. Energy 42 (1):364–74. doi:10.1016/j.energy.2012.03.041.
   Web of Science ®Google Scholar
• Zhu, R. M., . H., X. Wang, and Z. Huang. 2013. Effects of fuel constituents and injection timing on combustion and emission characteristics of a compression-ignition engine fueled with diesel-DMM blends. Proceedings of the Combustion Institute 34 (2):3013–20. doi:10.1016/j.proci.2012.06.174.
   Google Scholar
• Zoldy, M., A. Hollo, and A. Thernesz. 2010. Butanol as a diesel extender option for internal combustion engines. SAE Technical Paper. p. 01-0481. doi:10.4271/2010-01-0481.
   Google Scholar