186
Views
5
CrossRef citations to date
0
Altmetric
Articles

Numerical investigation of the baffle plates effect on the solar water storage tank efficiency

, , &
Pages 2034-2048 | Received 24 Sep 2018, Accepted 07 Apr 2019, Published online: 25 Apr 2019

References

  • Abdelhak, O., H. Mhiri, and P. Bournot. 2015. CFD analysis of thermal stratification in domestic hot water storage tank during dynamic mode. Building Simulation 8 (4):421–29. doi:10.1007/s12273-015-0216-9.
  • Alizadeh, S. 1999. An experimental and numerical study of thermal stratification in a horizontal cylindrical solar storage tank. Solar Energy 66:409–21. doi:10.1016/S0038-092X(99)00036-5.
  • Al-Marafie, A., S. M. Moustafa, and A. Al-Kandarie. 1989. Factors affecting static stratification of thermal water storage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 11 (3):183–99. doi:10.1080/00908318908908953.
  • Altuntop, N., M. Arslan, V. Ozceyhan, and M. Kanoglu. 2005. Effect of obstacles on thermal stratification in hot water storage tanks. Applied Thermal Engineering 25:2285–98. doi:10.1016/j.applthermaleng.2004.12.013.
  • Assari, M. R., H. B. Tabrizi, and M. Savadkohy. 2018b. Numerical and experimental study of inlet- outlet locations effect in horizontal storage tank of solar water heater. Sustainable Energy Technologies and Assessments 25:181–90. doi:10.1016/j.seta.2017.12.009.
  • Assari, M. R., H. B. Tabrizi, and M. J. Movahedi. 2018a. Experimental study on destruction of thermal stratification tank in solar collector performance. Journal of Energy Storage 15:124–32. doi:10.1016/j.est.2017.11.004.
  • Bonanos, A. M., and E. V. Votyakov. 2016. Sensitivity analysis for thermocline thermal storage tank design. Renewable Energy 99:764–71. doi:10.1016/j.renene.2016.07.052.
  • Bouhal, T., S. Fertahi, Y. Agrouaz, T. El Rhafiki, T. Kousksou, and A. Jamil. 2017. Numerical modeling and optimization of thermal stratification in solar hot water storage tanks for domestic applications: CFD study. Solar Energy 157:441–55. doi:10.1016/j.solener.2017.08.061.
  • Bouhal, T., Y. Agrouaz, T. El Rhafiki, Y. Zeraouli, and A. Jamil. 2018. Towards an energy efficiency optimization of solar horizontal storage tanks and circulation pipes integrating evacuated tube collectors through CFD parametric studies. Sustainable Energy Technologies and Assessments 26:93–104. doi:10.1016/j.seta.2017.10.004.
  • Bourne, S., and A. Novoselac. 2015. Compact PCM-based thermal stores for shifting peak cooling loads. Building Simulation 8 (6):673–88. doi:10.1007/s12273-015-0243-6.
  • Castell, A., M. Medrano, C. Solé, and L. F. Cabeza. 2010. Dimensionless numbers used to characterize stratification in water tanks for discharging at low flow rates. Renewable Energy 35 (6):2192–99. doi:10.1016/j.renene.2010.03.020.
  • Chow, T. T., Z. Dong, L. S. Chan, K. F. Fong, and Y. Bai. 2011. Performance evaluation of evacuated tube solar domestic hot water systems in Hong Kong. Energy and Buildings 43:3467–74. doi:10.1016/j.enbuild.2011.09.009.
  • Chung, J. D., S. H. Cho, C. S. Tae, and H. Yoo. 2008. The effect of diffuser configuration on thermal stratification in a rectangular storage tank. Renewable Energy 33:2236–45. doi:10.1016/j.renene.2007.12.013.
  • Erdemir, D., H. Atesoglu, and N. Altuntop. 2019. Experimental investigation on enhancement of thermal performance with obstacle placing in the horizontal hot water tank used in solar domestic hot water system. Renewable Energy 138:187–97. doi:10.1016/j.renene.2019.01.075.
  • Erdemir, D., and N. Altuntop. 2016. Effect of thermal stratification on energy and exergy in vertical mantled heat exchanger. International Journal of Exergy 20:105–21. doi:10.1504/IJEX.2016.076681.
  • Fan, J., S. Furbo, and H. Yue. 2015. Development of a hot water tank simulation program with improved prediction of thermal stratification in the tank. Energy Procedia 70:193–202. doi:10.1016/j.egypro.2015.02.115.
  • Fernandez-Seara, J., F. J. Uhı, and J. Sieres. 2007. Experimental analysis of a domestic electric hot water storage tank. Part II: Dynamic mode of operation. Applied Thermal Engineering 27:137–44. doi:10.1016/j.applthermaleng.2006.05.004.
  • Fertahi, S., T. Bouhal, T. Kousksou, A. Jamil, and A. Benbassou. 2018a. Experimental study and CFD thermal assessment of horizontal hot water storage tank integrating evacuated tube collectors with heat pipes. Solar Energy 170:234–51. doi:10.1016/j.solener.2018.05.062.
  • Fertahi, S., T. Bouhal, Y. Agrouaz, T. Kousksou, T. El Rhafiki, and Y. Zeraouli. 2018b. Performance optimization of a two-phase closed thermosyphon through CFD numerical simulations’. Applied Thermal Engineering 128:551–63. doi:10.1016/j.applthermaleng.2017.09.049.
  • Gyüre, B., and I. M. Jánosi. 2003. Stratified flow over asymmetric and double bell-shaped obstacles. Dynamics of Atmospheres and Oceans 37 (2):155–70. doi:10.1016/S0377-0265(03)00030-7.
  • Haller, M. Y., C. A. Cruickshank, W. Streicher, S. J. Harrison, E. Andersen, and S. Furbo. 2009. Methods to determine stratification efficiency of thermal energy storage processes – Review and theoretical comparison. Solar Energy 83 (6):1847–60. doi:10.1016/j.solener.2009.06.019.
  • Haller, M. Y., E. Yazdanshenas, E. Andersen, C. Bales, W. Streicher, and S. Furbo. 2010. A method to determine stratification efficiency of thermal energy storage processes independently from storage heat losses. Solar Energy 84 (6):997–1007. doi:10.1016/j.solener.2010.03.009.
  • Joseph, J., G. Agrawal, D. K. Agarwal, J. C. Pisharady, and S. S. Kumar. 2017. Effect of insulation thickness on pressure evolution and thermal stratification in a cryogenic tank. Applied Thermal Engineering 111:1629–39. doi:10.1016/j.applthermaleng.2016.07.015.
  • Kocar, G., and A. Eryasar. 2007. An application of solar energy storage in the gas: Solar heated biogas plants. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 29 (16):1513–20. doi:10.1080/00908310600626598.
  • Kong, L., and N. Zhu. 2016. CFD simulations of thermal stratification heat storage water tank with an inside cylinder with openings. Procedia Engineering 146:394–99. doi:10.1016/j.proeng.2016.06.419.
  • Kurşun, B., and K. Ökten. 2018. Effect of rectangular hot water tank position and aspect ratio on thermal stratification enhancement. Renewable Energy 116:639–46. doi:10.1016/j.renene.2017.10.013.
  • Li, S. H., Y. X. Zhang, Y. Li, and X. S. Zhang. 2014. Experimental study of inlet structure on the discharging performance of a solar water storage tank. Energy and Buildings 70:490–96. doi:10.1016/j.enbuild.2013.11.086.
  • Murali, G., and K. Mayilsamy. 2016. Effect of latent thermal energy storage and inlet locations on enhancement of stratification in a solar water heater under discharging mode. Applied Thermal Engineering 106:354–60. doi:10.1016/j.applthermaleng.2016.06.030.
  • Nicodemus, J. H., J. Jeffrey, J. Haase, and D. Bedding. 2017. Effect of baffle and shroud designs on discharge of a thermal storage tank using an immersed heat exchanger . Solar Energy 157:911–19. doi:10.1016/j.solener.2017.09.008.
  • Shah, L. J., E. Andersen, and S. Furbo. 2005. Theoretical and experimental investigations of inlet stratifiers for solar storage tanks. Applied Thermal Engineering 25:2086–99. doi:10.1016/j.applthermaleng.2005.01.011.
  • Smusz, R. 2017. Numerical study of thermal stratification in hot water storage tank. Progress in Computational Fluid Dynamics 17 (6):368–75. doi:10.1504/PCFD.2017.088792.
  • Wang, Z., H. Zhang, B. Dou, H. Huang, W. Wu, and Z. Wang. 2017. Experimental and numerical research of thermal stratification with a novel inlet in a dynamic hot water storage tank. Renewable Energy 111:353–71. doi:10.1016/j.renene.2017.04.007.
  • Wu, S. M., and G.-Y. Fang. 2012. The discharging characteristics of a solar thermal storage system using a packed bed with spherical capsules. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 34 (9):858–65. doi:10.1080/15567031003699491.
  • Yaïci, W., M. Ghorab, E. Entchev, and S. Hayden. 2013. Three-dimensional unsteady CFD simulations of a thermal storage tank performance for optimum design. Applied Thermal Engineering 60 (1–2):152–63. doi:10.1016/j.applthermaleng.2013.07.001.
  • Yee, C. K., and F. C. Lai. 2001. Effects of a porous manifold on thermal stratification in a liquid storage tank. Solar Energy 71 (4):241–54. doi:10.1016/S0038-092X(01)00043-3.
  • Zachár, A., I. Farkas, and F. Szlivka. 2003. Numerical analyses of the impact of plates for thermal stratification inside a storage tank with upper and lower inlet flows. Solar Energy 74:287–302. doi:10.1016/S0038-092X(03)00188-9.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.