Sensitivity analysis of thermal stress in a cathode porous electrode for a planar solid oxide fuel cell

References

• Akhtar, N., S. P. Decent, D. Loghin, and K. Kendall. 2009. A three dimensional numerical model of a single-chamber solid oxide fuel cell, International Journal. International Journal of Hydrogen Energy 34:8645–63. doi:https://doi.org/10.1016/j.ijhydene.2009.07.113.
   Web of Science ®Google Scholar
• Boccaccini, D. N., O. Sevecek, H. L. Frandsen, I. Dlouhy, S. Molin, M. Cannio, J. Hjelm, and P. V. Hendriksen. 2016. Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector–Electrode interfaces. Material Letters 162:250–53. doi:https://doi.org/10.1016/j.matlet.2015.07.137.
   Web of Science ®Google Scholar
• Boley, B. A., and J. H. Weiner. 1997. Fuel theory of thermal stresses. New York: Dover publication.
   Google Scholar
• Bove, R., and S. Ubertini. 2008. Modeling solid oxide fuel cells methods, procedures and techniques. Fuel Cell and Hydrogen Energy 1:13–50.
   Google Scholar
• Celik, S., B. Ibrahimoglu, M. D. Mat, Y. Kaplan, T. N. Veziroglu, et al. 2015. Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell. International Journal of Hydrogen Energy 40:7895–902. doi:https://doi.org/10.1016/j.ijhydene.2014.10.057.
   Web of Science ®Google Scholar
• Cuia, D., and M. Cheng. 2009 July 15. Thermal stress modeling of anode supported micro-tubular solid oxide fuel cel. Journal of Power Sources 192(2): 400–07. doi: https://doi.org/10.1016/j.jpowsour.2009.03.046.
   Web of Science ®Google Scholar
• Fleischhauer, F., M. Terner, R. Bermejo, R. Danzer, A. Mai, T. Graule, and J. Kuebler. 2015. Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells. Journal of Power Sources 275:217–26. doi:https://doi.org/10.1016/j.jpowsour.2014.10.083.
   Web of Science ®Google Scholar
• Greco, F., H. L. Frandsen, A. Nakajo, M. F. Madsen, and J. Van Herle. 2014. Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack. Journal of the European Ceramic Society 34:2695–704. doi:https://doi.org/10.1016/j.jeurceramsoc.2013.12.055.
   Web of Science ®Google Scholar
• Hetnarski, R. B., and M. R. Eslami. 2008. Thermal stress: Advanced in theory. New York, NY: Springer publication.
   Google Scholar
• Hibino, T., A. Hashimoto, M. Yano, M. Suzuki, S.-I. Yoshida, and M. Sano. 2002. High performance anodes for sofcs operating in methane-air mixture at reduced temperatures. Journal of Electrochemistry Society 149: doi: https://doi.org/10.1149/1.1430226.
   Google Scholar
• Ho, T. X., P. Kosinski, A. C. Hoffmann, and A. Vik. 2010. Effects of heat sources on the performance of a planar solid oxide fuel cell. International Journal of Hydrogen Energy 35:4276–84. doi:https://doi.org/10.1016/j.ijhydene.2010.02.016.
   Web of Science ®Google Scholar
• Hoogers, G., Editor. 2003. Fuel Cell Technology Handbook. Boca Raton, FL: CRC Press.
   Google Scholar
• Hussain M. M., X. Li, I. Dincer, et al. 2006. Mathematical modeling of planar solid oxide fuel cells. Journal of Power Sources 161:1012–22. doi:https://doi.org/10.1016/j.jpowsour.2006.05.055.
   Web of Science ®Google Scholar
• Jiang W., Y. Zhang, W. Woo, S. T. Tu, et al. 2011. Effect of Al2O3 film on thermal stress in the bonded compliant seal design of planar solid oxide fuel cell. Journal of Power Sources 196 (24): 15 December 10616–24. doi:https://doi.org/10.1016/j.jpowsour.2011.08.074.
   Web of Science ®Google Scholar
• Kamvar M., M., Ghassemi, M., Rezaei, et al. 2016. Effect of catalyst layer configuration on single chamber solid oxide fuel cell performance. Applied Thermal Engineering, 100:98–104. May doi:https://doi.org/10.1016/j.applthermaleng.2016.01.128.
   Web of Science ®Google Scholar
• Larminie, J., and A. Dicks. 2003. Fuel cell systems explained. Second ed. New York: John Wiley.
   Google Scholar
• Liu, L., G. Kim, and A. Chandra. 2010 April 15. Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions. Journal of Power Sources 195(8): 2310–18. doi: https://doi.org/10.1016/j.jpowsour.2009.10.064.
   Web of Science ®Google Scholar
• Luo, Y., W. Jiang, Q. Zhang, W. Y. Zhang, and M. Hao. 2016. Effects of anode porosity on thermal stress and failure probability of planar solid oxide fuel cell with bonded compliant seal. International Journal of Hydrogen Energy 41:7464–74. doi:https://doi.org/10.1016/j.ijhydene.2016.03.117.
   Web of Science ®Google Scholar
• Milewski J. et al. 2011. Advanced methods of solid oxide fuel cell modeling. New York, NY: Springer publication.
   Google Scholar
• Min, X., T. Li, M. Yang, and M. Andersson. 2016. Solid oxide fuel cell interconnect design optimization considering the thermal stresses. Science Bulletin 61:1333–44. doi:https://doi.org/10.1007/s11434-016-1146-3.
   PubMed Web of Science ®Google Scholar
• Nehter, P. 2008. Theoretical analysis of high fuel utilization solid oxide fuel cell. New York: Nova Science publications.
   Google Scholar
• Peksen, M. 2015. Numerical thermomechanical modelling of solid oxide fuel cells. Progress in Energy and Combustion Science 48:1–20. doi:https://doi.org/10.1016/j.pecs.2014.12.001.
   Web of Science ®Google Scholar
• Pianko-Oprych, P., T. Zinko, and Z. Jaworski. 2016. A numerical investigation of the thermal stresses of a planar solid oxide fuel cell. Materials. doi:https://doi.org/10.3390/ma9100814.
   Google Scholar
• Rogers W., R. S. Gemmen, C. Johnson, M. T. Prinkey, and M. Shahnam. 2003. Validation and application of a CFD-based model for solid oxide fuel cells and stacks. Fuel Cell Science Engineering and Technology 1762:517-520.
   Google Scholar
• Shao Q., L. Bouhala, D. Fiorelli, M. Fahs, A. Younes, P. Núñez, S. Belouettar, A. Makradi, et al. 2016. Influence of fluid flow and heat transfer on crack propagation in SOFC multi-layered like material with anisotropic porous layers. International Journal of Solids and Structures. 78-79(Pages):189–98. doi:https://doi.org/10.1016/j.ijsolstr.2015.08.026.
   Google Scholar
• Shao, Q., R. Fernández-González, J. C. Ruiz-Morales, L. Bouhala, D. Fiorelli, A. Younes, P. Núñez, S. Belouettar, and A. Makradi. 2015. An advanced numerical model for energy conversion and crack growth predictions in Solid Oxide Fuel Cell units. International Journal of Hydrogen Energy 40:16509–20. doi:https://doi.org/10.1016/j.ijhydene.2015.10.016.
   Web of Science ®Google Scholar
• Singh, P., and P. Bansal. 2008. Advances in solid oxide fuel cells IV. N. York John Wiley publications.
   Google Scholar
• Vaidya, S., and J. Ho Kim. March 1 2013. Finite element thermal stress analysis of solid oxide fuel cell cathode microstructures. Journal of Power Sources 225: 269–76. doi:https://doi.org/10.1016/j.jpowsour.2012.10.054.
   Web of Science ®Google Scholar
• Wei S.-S., T.-H. Wang, J.-S. Wu, et al. 2014. Numerical modeling of interconnect flow channel design and thermal stress analysis of a planar anode-supported solid oxide fuel cell stack. Energy 69 553–61. 1 May doi:https://doi.org/10.1016/j.energy.2014.03.052.
   Web of Science ®Google Scholar
• Zhu H., R. J. Kee, V. M. Janardhanan, O. Deutschmann, D. G. Goodwin, et al. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells. Journal of Electrochemistry Society, 152 2005 doi:https://doi.org/10.1149/1.2116607.
   Google Scholar