Grey-Taguchi and ANN based optimization of a better performing low-emission diesel engine fueled with biodiesel

References

• Agarwal, D., and A. K. Agarwal. 2007. Performance and emissions characteristics of Jatropha oil (preheated and blends) in a direct injection compression ignition engine. Applied Thermal Engineering 27 (13):2314–23. doi:https://doi.org/10.1016/j.applthermaleng.2007.01.009.
   Web of Science ®Google Scholar
• Anand, R., and N. Mahalakshmi. 2007. Simultaneous reduction of NO x and smoke from a direct-injection diesel engine with exhaust gas recirculation and diethyl ether. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 221 (1):109–16.
   Web of Science ®Google Scholar
• Asad Naeem Shah, F. H. S., E. M. Shahid, and S. S. Safdar Gardezi. 2016. Prediction of an optimum biodiesel-diesel blended fuel for compression ignition engine using GT-power. Pakistan Journal of Engineering and Applied Sciences 14:102–14.
   Google Scholar
• Ayaz, M., D. M. Khaki, and N. B. M. Arab. 2013. Improvement of grain size and dome height of microalloyed steels using Taguchi method based on grey relational grade in controlled rolling. Journal of Iron and Steel Research, International 20 (12):115–23. doi:https://doi.org/10.1016/S1006-706X(13)60224-1.
   Web of Science ®Google Scholar
• Bari, S., T. Lim, and C. Yu. 2002. Effects of preheating of crude palm oil (CPO) on injection system, performance and emission of a diesel engine. Renewable Energy 27 (3):339–51. doi:https://doi.org/10.1016/S0960-1481(02)00010-1.
   Web of Science ®Google Scholar
• Buyukkaya, E. 2010. Effects of biodiesel on a DI diesel engine performance, emission and combustion characteristics. Fuel 89 (10):3099–105. doi:https://doi.org/10.1016/j.fuel.2010.05.034.
   Web of Science ®Google Scholar
• Castorena-Cortes, G., T. Roldán-Carrillo, I. Zapata-Peñasco, J. Reyes-Avila, L. Quej-Aké, J. Marín-Cruz, and P. Olguín-Lora. 2009. Microcosm assays and Taguchi experimental design for treatment of oil sludge containing high concentration of hydrocarbons. Bioresource Technology 100 (23):5671–77. doi:https://doi.org/10.1016/j.biortech.2009.06.050.
   PubMed Web of Science ®Google Scholar
• Chiang, K.-T., and F.-P. Chang. 2006. Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis. Journal of Materials Processing Technology 180 (1):96–101. doi:https://doi.org/10.1016/j.jmatprotec.2006.05.008.
   Web of Science ®Google Scholar
• Equbal, M. I., M. Shamim, and R. Ohdar. 2014. A Grey-based Taguchi method to optimize hot forging process. Procedia Materials Science 6:1495–504. doi:https://doi.org/10.1016/j.mspro.2014.07.129.
   Google Scholar
• Fausett, L. 1994. Fundamentals of neural network architecture, algorithms, and applications. UK: Prentice Hall.
   Google Scholar
• Gau, H., C. Hsieh, and C. Liu. 2006. Application of grey correlation method to evaluate potential groundwater recharge sites. Stochastic Environmental Research and Risk Assessment 20 (6):407–21. doi:https://doi.org/10.1007/s00477-006-0034-9.
   Web of Science ®Google Scholar
• Ghobadian, B., H. Rahimi, A. M. Nikbakht, G. Najafi, and T. F. Yusaf. 2009. Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network. Renewable Energy 34 (4):976–82. doi:https://doi.org/10.1016/j.renene.2008.08.008.
   Web of Science ®Google Scholar
• Gopalsamy, B. M., B. Mondal, and S. Ghosh. 2009. Optimisation of machining parameters for hard machining: Grey relational theory approach and ANOVA. The International Journal of Advanced Manufacturing Technology 45 (11):1068–86. doi:https://doi.org/10.1007/s00170-009-2054-3.
   Web of Science ®Google Scholar
• Gul, M., A. N. Shah, Y. Jamal, and I. Masood. 2016. Multi-variable optimization of diesel engine fuelled with biodiesel using grey-Taguchi method. Journal of the Brazilian Society of Mechanical Sciences and Engineering 38 (2):621–32. doi:https://doi.org/10.1007/s40430-015-0312-x.
   Web of Science ®Google Scholar
• Hemmerlein, N., Korte, V., Richter, H., & Schröder, G. Performance, exhaust emissions and durability of modern diesel engines running on rapeseed oil. 1991, SAE Technical Paper.
   Google Scholar
• Jung, J. H., and W. T. Kwon. 2010. Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis. Journal of Mechanical Science and Technology 24 (5):1083–90. doi:https://doi.org/10.1007/s12206-010-0305-8.
   Web of Science ®Google Scholar
• Kannan, G., K. Balasubramanian, and R. Anand. 2013. Artificial neural network approach to study the effect of injection pressure and timing on diesel engine performance fueled with biodiesel. International Journal of Automotive Technology 14 (4):507–19. doi:https://doi.org/10.1007/s12239-013-0055-6.
   Web of Science ®Google Scholar
• Karnwal, A., M. M. Hasan, N. Kumar, A. N. Siddiquee, and Z. A. Khan. 2011. Multi-response optimization of diesel engine performance parameters using thumba biodiesel-diesel blends by applying the Taguchi method and grey relational analysis. International Journal of Automotive Technology 12 (4):599–610. doi:https://doi.org/10.1007/s12239-011-0070-4.
   Web of Science ®Google Scholar
• Khan, H. M., C. H. Ali, T. Iqbal, S. Yasin, M. Sulaiman, H. Mahmood, M. Raashid, M. Pasha, and B. Mu. 2018. Current scenario and potential of biodiesel production from waste cooking oil in Pakistan: An overview. Chinese Journal of Chemical Engineering. doi:https://doi.org/10.1016/j.cjche.2018.12.010.
   Google Scholar
• Li, C.-H., and M.-J. Tsai. 2009. Multi-objective optimization of laser cutting for flash memory modules with special shapes using grey relational analysis. Optics & Laser Technology 41 (5):634–42. doi:https://doi.org/10.1016/j.optlastec.2008.09.009.
   Web of Science ®Google Scholar
• Lin, J., and C. Lin. 2002. The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics. International Journal of Machine Tools and Manufacture 42 (2):237–44. doi:https://doi.org/10.1016/S0890-6955(01)00107-9.
   Web of Science ®Google Scholar
• Martowibowo, S., and A. Wahyudi. 2012. Taguchi method implementation in taper motion wire EDM process optimization. Journal of the Institution of Engineers (india): Series C 93 (4):357–64. doi:https://doi.org/10.1007/s40032-012-0043-z.
   Google Scholar
• Mathur, H., and L. Das. 1985. Utilization of non-edible wild oils as diesel engine fuels. Proceedings Bio-Energy Society Second Convention and Symposium, Oct.13–14, Hyderabad, India, pp. 198–202.
   Google Scholar
• Mehat, N. M., and S. Kamaruddin. 2012. Quality control and design optimisation of plastic product using Taguchi method: A comprehensive review. International Journal of Plastics Technology 16 (2):194–209. doi:https://doi.org/10.1007/s12588-012-9037-1.
   Google Scholar
• Meireles, M. R., P. E. Almeida, and M. G. Simões. 2003. A comprehensive review for industrial applicability of artificial neural networks. IEEE Transactions on Industrial Electronics 50 (3):585–601. doi:https://doi.org/10.1109/TIE.2003.812470.
   Web of Science ®Google Scholar
• Nwafor, O. 2004. Emission characteristics of diesel engine running on vegetable oil with elevated fuel inlet temperature. Biomass and Bioenergy 27 (5):507–11. doi:https://doi.org/10.1016/j.biombioe.2004.02.004.
   Web of Science ®Google Scholar
• Pan, L. K., C. C. Wang, S. L. Wei, and H. F. Sher. 2007. Optimizing multiple quality characteristics via Taguchi method-based Grey analysis. Journal of Materials Processing Technology 182 (1):107–16. doi:https://doi.org/10.1016/j.jmatprotec.2006.07.015.
   Web of Science ®Google Scholar
• Park, S., H. Kim, and B. Choi. 2009. Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20). Journal of Mechanical Science and Technology 23 (9):2555–64. doi:https://doi.org/10.1007/s12206-009-0704-x.
   Web of Science ®Google Scholar
• Prasanna, J., L. Karunamoorthy, M. Venkat Raman, S. Prashanth, and D. Raj Chordia. 2014. Optimization of process parameters of small hole dry drilling in Ti–6Al–4V using Taguchi and grey relational analysis. Measurement 48:346–54. doi:https://doi.org/10.1016/j.measurement.2013.11.020.
   Web of Science ®Google Scholar
• Priyadarshini, M., and K. Pal. 2015. Grey-Taguchi based optimizationof EDM process for titanium alloy. Materials Today: Proceedings 2 (4–5):2472–81.
   Google Scholar
• Raheman, H., and A. G. Phadatare. 2004. Diesel engine emissions and performance from blends of karanja methyl ester and diesel. Biomass and Bioenergy 27 (4):393–97. doi:https://doi.org/10.1016/j.biombioe.2004.03.002.
   Web of Science ®Google Scholar
• Ramadhas, A., S. Jayaraj, and C. Muraleedharan. 2004. Use of vegetable oils as IC engine fuels—A review. Renewable Energy 29 (5):727–42. doi:https://doi.org/10.1016/j.renene.2003.09.008.
   Web of Science ®Google Scholar
• Reddy, P., N. Kapilan, and R. Reddy. 2008. Experimental investigation of esters of mahua oil as an alternative fuel for dual fuel engine. Ie (i) J–mc 89:7–10.
   Google Scholar
• Roy, S., A. K. Das, and R. Banerjee. 2014. Application of Grey–Taguchi based multi-objective optimization strategy to calibrate the PM–NHC–BSFC trade-off characteristics of a CRDI assisted CNG dual-fuel engine. Journal of Natural Gas Science and Engineering 21:524–31. doi:https://doi.org/10.1016/j.jngse.2014.09.022.
   Web of Science ®Google Scholar
• Sharanappa, G., S. R. P. Reddy, and C. S. Murthy. 2007. Study on the performance and exhaust emissions of a diesel engine using preheated Mahua oil and its blends as fuel. in International Conference on IC Engines and Combustion (ICONICE-2007), Jawaharlal Nehru Technological University Kukatpally, Hyderabad. doi: https://doi.org/10.1094/PDIS-91-4-0467B
   Google Scholar
• Tsai, M.-J., and C.-H. Li. 2009. The use of grey relational analysis to determine laser cutting parameters for QFN packages with multiple performance characteristics. Optics & Laser Technology 41 (8):914–21. doi:https://doi.org/10.1016/j.optlastec.2009.03.006.
   Web of Science ®Google Scholar
• Tzeng, C.-J., Y.-H. Lin, Y.-K. Yang, and M.-C. Jeng. 2009. Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis. Journal of Materials Processing Technology 209 (6):2753–59. doi:https://doi.org/10.1016/j.jmatprotec.2008.06.046.
   Web of Science ®Google Scholar
• Wijayasekara, D., M. Manic, P. Sabharwall, and V. Utgikar. 2011. Optimal artificial neural network architecture selection for performance prediction of compact heat exchanger with the EBaLM-OTR technique. Nuclear Engineering and Design 241 (7):2549–57. doi:https://doi.org/10.1016/j.nucengdes.2011.04.045.
   Web of Science ®Google Scholar
• Yaakob, Z., M. Mohammad, M. Alherbawi, Z. Alam, and K. Sopian. 2013. Overview of the production of biodiesel from Waste cooking oil. Renewable and Sustainable Energy Reviews 18:184–93. doi:https://doi.org/10.1016/j.rser.2012.10.016.
   Web of Science ®Google Scholar
• Yang, W. P., and Y. Tarng. 1998. Design optimization of cutting parameters for turning operations based on the Taguchi method. Journal of Materials Processing Technology 84 (1):122–29. doi:https://doi.org/10.1016/S0924-0136(98)00079-X.
   Web of Science ®Google Scholar
• Zeng, S., and Y. Xiong. 2012. Application of grey based taguchi method to determine optimal end milling parameters. in International Conference on Intelligent Robotics and Applications. Springer. doi: https://doi.org/10.1094/PDIS-11-11-0999-PDN
   Google Scholar