230
Views
11
CrossRef citations to date
0
Altmetric
Review

Study of performance and emissions of a stationary DI variable compression ratio CI engine fueled with n-butanol/diesel blends using Taguchi technique: analytical and experimental analysis

ORCID Icon, , , , &
Pages 2972-2998 | Received 12 Jun 2019, Accepted 29 Aug 2019, Published online: 18 Sep 2019

References

  • Ansari, N. A., A. Sharma, and Y. Singh. 2018. Performance and emission analysis of a diesel engine implementing polanga biodiesel and optimization using Taguchi method. Process Safety and Environmental Protection 120:146–54. doi:10.1016/j.psep.2018.09.009.
  • Atmanli, A. 2016. Comparative analyses of diesel-waste oil biodiesel and propanol, n-butanol or 1-pentanol blends in a diesel engine. Fuel 176:209–15. doi:10.1016/j.fuel.2016.02.076.
  • Atmanli, A., E. Ileri, and B. Yuksel. 2014. Experimental investigation of engine performance and exhaust emissions of a diesel engine fueled with diesel–N-butanol–Vegetable oil blends. Energy Conversion and Management 81:312–21. doi:10.1016/j.enconman.2014.02.049.
  • Atmanli, A., E. Ileri, and B. Yuksel. 2015. Effects of higher ratios of n-butanol addition to diesel-vegetable oil blends on performance and exhaust emissions of a diesel engine. J Energy Institute 88:209–20. doi:10.1016/j.joei.2014.09.008.
  • Atmanli, A., E. Ileri, B. Yuksel, and N. Yilmaz. 2015. Extensive analyses of diesel-vegetable oil-n-butanol ternary blends in a diesel engine. Applied Energy 145:155–62. doi:10.1016/j.apenergy.2015.01.071.
  • Atmanli, A., B. Yuksel, and E. Ileri. 2013. Experimental investigation of the effect of diesel-cotton oil-n-butanol ternary blends on phase stability, engine performance and exhaust emission parameters in a diesel engine. Fuel 109:503–11. doi:10.1016/j.fuel.2013.03.012.
  • Balki, M. K., C. Sayin, and M. Sarikaya. 2016. Optimization of the operating parameters based on Taguchi method in an SI engine used pure gasoline, ethanol and methanol. Fuel 180:630–37. doi:10.1016/j.fuel.2016.04.098.
  • Bayındir, H., M. Zerrakki Isık, and H. Aydın. 2017. Evaluation of combustion, performance and emission indicators of canola oil-kerosene blends in a power generator diesel engine. Applied Thermal Engineering 114:234–44. doi:10.1016/j.applthermaleng.2016.11.184.
  • Can, O., I. Celikten, and N. Usta. 2004. Effects of ethanol addition on performance and emissions of a turbocharged indirect injection diesel engine running at different injection pressures. Energy Conversion and Management 45:2429–40. doi:10.1016/j.enconman.2003.11.024.
  • Chen, G., W. Yu, Q. Li, and Z. Huang. 2012. Effects of n-butanol addition on the performance and emissions of a turbocharged common-rail diesel engine. SAE Tech Pap 2012-01-0852. doi:10.4271/2012-01-0852.
  • Chen, Z., J. Liu, Z. Han, B. Du, Y. Liu, and C. Lee. 2013. Study on performance and emissions of a passenger-car diesel engine fueled with butanol-diesel blends. Energy 55:638–46. doi:10.1016/j.energy.2013.03.054.
  • Chen, Z., Z. Wu, J. Liu, and C. Lee. 2014. Combustion and emissions characteristics of high n-butanol/diesel ratio blend in a heavy-duty diesel engine and EGR impact. Energy Conversion and Management 78:787–95. doi:10.1016/j.enconman.2013.11.037.
  • Choi, B., and X. Jiang. 2015. Individual hydrocarbons and particulate matter emission from a turbocharged CRDI diesel engine fueled with n-butanol/diesel blends. Fuel 154:188–95. doi:10.1016/j.fuel.2015.03.084.
  • Choi, B., X. Jiang, Y. K. Kim, G. Jung, C. Lee, I. Choi, and C. S. Song. 2015. Effect of diesel fuel blend with n-butanol on the emission of a turbocharged common rail direct injection diesel engine. Applied Energy 146:20–28. doi:10.1016/j.apenergy.2015.02.061.
  • Choi, C. Y., and R. D. Reitz. 1999. Experimental study on the effects of oxygenated fuel blends and multiple injection strategies on DI diesel engine emissions. Fuel 78:1303–17. doi:10.1016/S0016-2361(99)00058-7.
  • Choudhary, K. D., A. Nayyar, and M. S. Dasgupta. 2018. Effect of compression ratio on combustion and emission characteristics of C.I. engine operated with acetylene in conjunction with diesel fuel. Fuel 214:489–96. doi:10.1016/j.fuel.2017.11.051.
  • Corsini, A., A. Marchegiani, F. Rispoli, F. Sciulli, and P. Venturini. 2015. Vegetable oils as fuels in diesel engine. Engine Performance and Emissions. Energy Procedia 81:942–49. doi:10.1016/j.egypro.2015.12.151.
  • Curran, H. J., E. M. Fisher, P. A. Glaude, N. M. Marinov, W. J. Pitz, C. K. Westbrook, Layton D. W., Flynn P. F., Durrett R. P., Zur Loye A. O., Akinyemi O. C. 2001. Detailed chemical kinetic modeling of diesel combustion with oxygenated fuels. SAE Tech Pap 2001-01-0653. doi:10.4271/2001-01-0653.
  • Dogan, O. 2011. The influence of n-butanol/diesel fuel blends utilization on a small diesel engine performance and emissions. Fuel 90:2467–72. doi:10.1016/j.fuel.2011.02.033.
  • Emiroglu, A. O., and S. Mehmet. 2018. Combustion, performance and exhaust emission characterizations of a diesel engine operating with a ternary blend (alcohol-biodiesel-diesel fuel). Applied Thermal Engineering 133:371–80. doi:10.1016/j.applthermaleng.2018.01.069.
  • Fayad, M. A., A. Tsolakis, D. Fernandez-Rodriguez, J. M. Herreros, F. J. Martos, and M. Lapuerta. 2017. Manipulating modern diesel engine particulate emission characteristics through butanol fuel blending and fuel injection strategies for efficient diesel oxidation catalysts. Applied Energy 190:490–500. doi:10.1016/j.apenergy.2016.12.102.
  • Fayyazbakhsh, A., and V. Pirouzfar. 2016a. Investigating the influence of additives-fuel on diesel engine performance and emissions : Analytical modeling and experimental validation. Fuel 171:167–77. doi:10.1016/j.fuel.2015.12.028.
  • Fayyazbakhsh, A., and V. Pirouzfar. 2016b. Determining the optimum conditions for modified diesel fuel combustion considering its emission, properties and engine performance. Energy Conversion and Management 113:209–19. doi:10.1016/j.enconman.2016.01.058.
  • Fushimi, K., E. Kinoshita, and Y. Yoshimoto. 2013. Effect of butanol isomer on diesel combustion characteristics of butanol/gas oil blend. SAE Tech Pap 2013-32-9097. doi:10.4271/2013-32-9097.
  • Giakoumis, E. G., C. D. Rakopoulos, A. M. Dimaratos, and D. C. Rakopoulos. 2013. Exhaust emissions with ethanol or n-butanol diesel fuel blends during transient operation: A review. Renewable and Sustainable Energy Reviews 17:170–90. doi:10.1016/j.rser.2012.09.017.
  • Gupta, K., K. Suthar, K. Jain, and A. G. Das. n.d. Design and experimental investigations on six-stroke SI engine using acetylene with water injection. Environmental Science and Pollution Research. doi:10.1007/s11356-018-2407-2.
  • Huang, H., Q. Liu, W. Teng, M. Pan, C. Liu, and Q. Wang. 2017a. Improvement of combustion performance and emissions in diesel engines by fueling n -butanol/diesel/PODE 3 – 4 mixtures. Applied Energy. doi:10.1016/j.apenergy.2017.09.088.
  • Huang, H., Q. Liu, W. Teng, and Q. Wang. 2017b. The potentials for improving combustion performance and emissions in diesel engines by fueling n- butanol/diesel/PODE 3–4 blends. Energy Procedia 105:914–20. doi:10.1016/j.egypro.2017.03.415.
  • Huang, H., Q. Liu, R. Yang, T. Zhu, R. Zhao, and Y. Wang. 2015. Investigation on the effects of pilot injection on low temperature combustion in high-speed diesel engine fueled with n-butanol-diesel blends. Energy Conversion and Management 106:748–58. doi:10.1016/j.enconman.2015.10.031.
  • Ibrahim, A. 2016. Performance and combustion characteristics of a diesel engine fuelled by butanol-biodiesel-diesel blends. Applied Thermal Engineering 103:651–59. doi:10.1016/j.applthermaleng.2016.04.144.
  • Imtenan, S., H. H. Masjuki, M. Varman, I. M. Rizwanul Fattah, H. Sajjad, and M. I. Arbab. 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. Energy Conversion and Management 94:84–94. doi:10.1016/j.enconman.2015.01.047.
  • Isik, M. Z., H. Bayındır, B. Iscan, and H. Aydın. 2017. The effect of n-butanol additive on low load combustion, performance and emissions of biodiesel-diesel blend in a heavy duty diesel power generator. J Energy Institute 90:174–84. doi:10.1016/j.joei.2016.02.006.
  • Jabbar, S., M. Algayyim, A. P. Wandel, T. Yusaf, and S. Al-lwayzy. 2018. Impact of butanol-acetone mixture as a fuel additive on diesel engine performance and emissions. Fuel 227:118–26. doi:10.1016/j.fuel.2018.04.091.
  • Jain, N. L., S. L. Soni, M. P. Poonia, D. Sharma, A. K. Srivastava, and H. Jain. 2017. Performance and emission characteristics of preheated and blended thumba vegetable oil in a compression ignition engine. Applied Thermal Engineering 113:970–79. doi:10.1016/j.applthermaleng.2016.10.186.
  • Jang, Y. S., A. Malaviya, C. Cho, J. Lee, and S. Y. Lee. 2012. Butanol production from renewable biomass by clostridia. Bioresource Technology 123:653–63. doi:10.1016/j.biortech.2012.07.104.
  • Jin, C., M. Yao, H. Liu, C. F. F. Lee, and J. Ji. 2011. Progress in the production and application of n-butanol as a biofuel. Renewable and Sustainable Energy Reviews 15:4080–106. doi:10.1016/j.rser.2011.06.001.
  • Klein-Douwel, R. J. H., A. J. Donkerbroek, A. P. Van Vliet, M. D. Boot, L. M. T. Somers, R. S. G. Baert, N. J. Dam, and J. J. Ter Meulen. 2009. Soot and chemiluminescence in diesel combustion of bio-derived, oxygenated and reference fuels. Proceedings of the Combustion Institute. International Symposium on Combustion 32:2817–25. doi:10.1016/j.proci.2008.06.140.
  • Kumar, C., K. B. Rana, B. Tripathi, and A. Nayyar. 2018a. Properties and effects of organic additives on performance and emission characteristics of diesel engine: A comprehensive review. Environmental Science and Pollution Research 25:22475–98.
  • Kumar, C., K. B. Rana, B. Tripathi, and A. Nayyar. 2018b. A comparative study of oxygenated additives for diesel in compression ignition engine. International Journal of Renewable Energy Technology 9:16–27. doi:10.1504/IJRET.2018.090101.
  • Kumar, S., J. H. Cho, J. Park, and I. Moon. 2013. Advances in diesel-alcohol blends and their effects on the performance and emissions of diesel engines. Renewable and Sustainable Energy Reviews 22:46–72. doi:10.1016/j.rser.2013.01.017.
  • Lapuerta, M., O. Armas, and J. M. Herreros. 2008. Emissions from a diesel-bioethanol blend in an automotive diesel engine. Fuel 87:25–31. doi:10.1016/j.fuel.2007.04.007.
  • Liu, H., S. Li, Z. Zheng, J. Xu, and M. Yao. 2013. Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates. Applied Energy 112:246–56. doi:10.1016/j.apenergy.2013.06.023.
  • Lopez, A. F., M. Cadrazco, A. F. Agudelo, L. A. Corredor, J. A. Velez, and J. R. Agudelo. 2015. Impact of n-butanol and hydrous ethanol fumigation on the performance and pollutant emissions of an automotive diesel engine. Fuel 153:483–91. doi:10.1016/j.fuel.2015.03.022.
  • Martyr, A. J., and M. A. Plint. 2007. Engine testing theory and practice. 3rd ed. Burlington, MA: Elsevier Ltd.
  • Mccreath, C. G. 1971. The effect of fuel additives on the exhaust emissions from diesel engines. Comb 17:359–66.
  • Merola, S. S., C. Tornatore, S. E. Iannuzzi, L. Marchitto, and G. Valentino. 2014. Combustion process investigation in a high speed diesel engine fuelled with n-butanol diesel blend by conventional methods and optical diagnostics. Renewable Energy 64:225–37. doi:10.1016/j.renene.2013.11.017.
  • Moffat, R. J. 1988. Describing the uncertainties in experimental results. Experimental Thermal and Fluid Science 1:3–17. doi:10.1016/0894-1777(88)90043-X.
  • Mohsin, R., Z. A. Majid, A. H. Shihnan, N. S. Nasri, and Z. Sharer. 2014. Effect of biodiesel blends on engine performance and exhaust emission for diesel dual fuel engine. Energy Conversion and Management 88:821–28. doi:10.1016/j.enconman.2014.09.027.
  • Nabi, N., A. Zare, F. M. Hossain, T. A. Bodisco, Z. D. Ristovski, and R. J. Brown. 2017. A parametric study on engine performance and emissions with neat diesel and diesel-butanol blends in the 13-mode european stationary cycle. Energy Conversion and Management 148:251–59. doi:10.1016/j.enconman.2017.06.001.
  • Nayyar, A., D. Sharma, S. Lal, B. Bhardwaj, and M. Augustine. 2019. Modeling and experimental investigation for performance and emissions on a diesel engine using bio-oxygenated ternary fuel blends. Energy 168:136–50. doi:10.1016/j.energy.2018.11.098.
  • Nayyar, A., D. Sharma, S. Lal, and A. Mathur. 2017a. Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine : Modeling and experimental investigation. Energy Conversion and Management 150:242–58. doi:10.1016/j.enconman.2017.08.031.
  • Nayyar, A., D. Sharma, S. Lal, and A. Mathur. 2017b. Experimental investigation of performance and emissions of a VCR diesel engine fuelled with n-butanol diesel blends under varying engine parameters. Environmental Science and Pollution Research 20315–29. doi:10.1007/s11356-017-9599-8.
  • Nayyar, A., D. Sharma, S. L. Soni, and A. Mathur. 2017a. Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine: Modeling and experimental investigation. Energy Conversion and Management 150:242–58. doi:10.1016/j.enconman.2017.08.031.
  • Nayyar, A., D. Sharma, S. L. Soni, and A. Mathur. 2017b. Experimental study of performance and exhaust emissions of a vcr diesel engine fuelled with oxygenated additives. Proc. ASME. 57601; vol. 1 boil. heat recover. steam gener. combust. turbines; Energy water sustain. fuels, combust. mater. handl. heat exch. condens. cool. syst. balanc. V001T04A021, Charlotte, North Carolina, USA. ASME. doi:10.1115/POWER-ICOPE2017-3236.
  • Ommi, F., K. Nekofar, and V. Pirozfar. 2009. Emission and properties characteristics using additive- ethanol-diesel fuel blends on a diesel engine. Annals of the Faculty of Engineering Hunedora–Journal of Engineering 7:35–42.
  • Palash, S. M., H. H. Masjuki, M. A. Kalam, B. M. Masum, A. Sanjid, and M. J. Abedin. 2013. State of the art of NOx mitigation technologies and their effect on the performance and emission characteristics of biodiesel-fueled compression ignition engines. Energy Conversion and Management 76:400–20. doi:10.1016/j.enconman.2013.07.059.
  • Pathak, S. K., A. K. Thakur, A. Nayyar, and C. Kumar. 2018. A comprehensive review of biodiesel and CNG as alternative fuels for compression ignition engine. International Journal of Renewable Energy Technology 9:223–43. doi:10.1504/IJRET.2018.090119.
  • Pfromm, P. H., V. Amanor-Boadu, R. Nelson, P. Vadlani, and R. Madl. 2010. Bio-butanol vs. bio-ethanol: A technical and economic assessment for corn and switchgrass fermented by yeast or clostridium acetobutylicum. Biomass and Bioenergy 34:515–24. doi:10.1016/j.biombioe.2009.12.017.
  • Pirouzfar, V., A. Zarringhalam Moghaddam, and B. Mirza. 2012. Physicochemical properties and combustion performance of gas oil-fuel additives. Journal of Energy Resources Technology, Transactions of the ASME 134:1–21. doi:10.1115/1.4007483.
  • Pradelle, F., S. L. Braga, A. R. F. de A Martins, F. Turkovics, and R. N. C. Pradelle. 2017. Stabilization of diesel–Biodiesel–Ethanol (DBE) blends: Formulation of an additive from renewable sources. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:3277–93. doi:10.1007/s40430-017-0862-1.
  • Putrasaria, Y., A. Nura, and A. Muharama. 2013. Performance and emission characteristic on a two cylinder DI diesel engine fuelled with ethanol-diesel blends. Energy Procedia 32:21–30. doi:10.1016/j.egypro.2013.05.004.
  • Qureshi, N., and H. P. Blaschek. 2001. ABE production from corn: A recent economic evaluation. Journal of Industrial Microbiology & Biotechnology 27:292–97. doi:10.1038/sj/jim/7000123.
  • Qureshi, N., B. C. Saha, M. A. Cotta, and V. Singh. 2013. An economic evaluation of biological conversion of wheat straw to butanol: A biofuel. Energy Conversion and Management 65:456–62. doi:10.1016/j.enconman.2012.09.015.
  • Qureshi, N., B. C. Saha, B. Dien, R. E. Hector, and M. A. Cotta. 2010. Production of butanol (a biofuel) from agricultural residues: Part I - Use of barley straw hydrolysate. Biomass and Bioenergy 34:559–65. doi:10.1016/j.biombioe.2009.12.024.
  • Rahman, M. M., S. Stevanovic, R. J. Brown, and Z. Ristovski. 2013. Influence of different alternative fuels on particle emission from a turbocharged common-rail diesel engine. Procedia Engineering 56:381–86. doi:10.1016/j.proeng.2013.03.136.
  • Rajasekar, E., A. Muragesan, R. Subramanian, and N. Nedunchezhian. 2010. Review of NOx reduction technologies in CI engines fuelled with oxygenated biomass fuels.pdf. Renewable and Sustainable Energy Reviews 14:2113–21. doi:10.1016/j.rser.2010.03.005.
  • Rajesh Kumar, B., S. Saravanan, and K. Rajaram. 2019. Combined effect of oxygenates and injection timing for low emissions and high performance in a diesel engine using multi-response optimisation. Alexandria Engineering Journal 58:625–36. doi:10.1016/j.aej.2019.03.009.
  • Rakopoulos, C. D., K. A. Antonopoulos, and D. C. Rakopoulos. 2007. Experimental heat release analysis and emissions of a HSDI diesel engine fueled with ethanol-diesel fuel blends. Energy 32:1791–808. doi:10.1016/j.energy.2007.03.005.
  • Rakopoulos, C. D., A. M. Dimaratos, E. G. Giakoumis, and D. C. Rakopoulos. 2010a. Investigating the emissions during acceleration of a turbocharged diesel engine operating with bio-diesel or n-butanol diesel fuel blends. Energy 35:5173–84. doi:10.1016/j.energy.2010.07.049.
  • Rakopoulos, C. D., A. M. Dimaratos, E. G. Giakoumis, and D. C. Rakopoulos. 2011a. Study of turbocharged diesel engine operation, pollutant emissions and combustion noise radiation during starting with bio-diesel or n-butanol diesel fuel blends. Applied Energy 88:3905–16. doi:10.1016/j.apenergy.2011.03.051.
  • Rakopoulos, D. C., C. D. Rakopoulos, and E. G. Giakoumis. 2015. Impact of properties of vegetable oil, bio-diesel, ethanol and n -butanol on the combustion and emissions of turbocharged HDDI diesel engine operating under steady and transient conditions. Fuel 156:1–19. doi:10.1016/j.fuel.2015.04.021.
  • Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, A. M. Dimaratos, and D. C. Kyritsis. 2010b. Effects of butanol-diesel fuel blends on the performance and emissions of a high-speed di diesel engine. Energy Conversion and Management 51:1989–97. doi:10.1016/j.enconman.2010.02.032.
  • Rakopoulos, D. C., C. D. Rakopoulos, E. G. Giakoumis, R. G. Papagiannakis, and D. C. Kyritsis. 2014. Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether. Energy 73:354–66. doi:10.1016/j.energy.2014.06.032.
  • Rakopoulos, D. C., C. D. Rakopoulos, D. T. Hountalas, E. C. Kakaras, E. G. Giakoumis, and R. G. Papagiannakis. 2010c. Investigation of the performance and emissions of bus engine operating on butanol/diesel fuel blends. Fuel 89:2781–90. doi:10.1016/j.fuel.2010.03.047.
  • Rakopoulos, D. C., C. D. Rakopoulos, and D. C. Kyritsis. 2016. Butanol or DEE blends with either straight vegetable oil or biodiesel excluding fossil fuel : Comparative effects on diesel engine combustion attributes, cyclic variability and regulated emissions trade-off. Energy 115:314–25. doi:10.1016/j.energy.2016.09.022.
  • Rakopoulos, D. C., C. D. Rakopoulos, R. G. Papagiannakis, and D. C. Kyritsis. 2011b. Combustion heat release analysis of ethanol or n-butanol diesel fuel blends in heavy-duty di diesel engine. Fuel 90:1855–67. doi:10.1016/j.fuel.2010.12.003.
  • Ramey, D. E. 2007. Butanol : The other alternative fuel. Agricultural Biofuels: Technology, Sustainability and Profitability 85:137.
  • Rosha, P., A. Dhir, and S. Kumar. 2018. Influence of gaseous fuel induction on the various engine characteristics of a dual fuel compression ignition engine : A review. Renewable and Sustainable Energy Reviews 82:3333–49. doi:10.1016/j.rser.2017.10.055.
  • Sahin, Z., and O. N. Aksu. 2015. Experimental investigation of the effects of using low ratio n-butanol/diesel fuel blends on engine performance and exhaust emissions in a turbocharged DI diesel engine. Renewable Energy 77:279–90. doi:10.1016/j.renene.2014.11.093.
  • Sahin, Z., O. Durgun, and O. N. Aksu. 2015. Experimental investigation of n-butanol/diesel fuel blends and n-butanol fumigation - evaluation of engine performance, exhaust emissions, heat release and flammability analysis. Energy Conversion and Management 103:778–89. doi:10.1016/j.enconman.2015.06.089.
  • Saravanan, S., B. R. Kumar, A. Varadharajan, D. Rana, B. Sethuramasamyraja, and G. L. Narayana. 2017. Optimization of DI diesel engine parameters fueled with iso -butanol/diesel blends – response surface methodology approach. Fuel 203:658–70. doi:10.1016/j.fuel.2017.04.083.
  • Sayin, C. 2010. Engine performance and exhaust gas emissions of methanol and ethanol-diesel blends. Fuel 89:3410–15. doi:10.1016/j.fuel.2010.02.017.
  • Sayin, C., A. N. Ozsezen, and M. Canakci. 2010. The influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel. Fuel 89:1407–14. doi:10.1016/j.fuel.2009.10.035.
  • Siwale, L., L. Kristof, T. Adam, A. Bereczky, M. Mbarawa, A. Penninger, and A. Kolesnikov. 2013. Combustion and emission characteristics of n-butanol/diesel fuel blend in a turbo-charged compression ignition engine. Fuel 107:409–18. doi:10.1016/j.fuel.2012.11.083.
  • Tutak, W. 2014. Bioethanol E85 as a fuel for dual fuel diesel engine. Energy Conversion and Management 86:39–48. doi:10.1016/j.enconman.2014.05.016.
  • Valentino, G., F. E. Corcione, S. E. Iannuzzi, and S. Serra. 2012. Experimental study on performance and emissions of a high speed diesel engine fuelled with n-butanol diesel blends under premixed low temperature combustion. Fuel 92:295–307. doi:10.1016/j.fuel.2011.07.035.
  • Vojtisek-Lom, M., V. Beranek, P. Mikuska, K. Krumal, P. Coufalik, J. Sikorova, Topinka J. 2017. Blends of butanol and hydrotreated vegetable oils as drop-in replacement for diesel engines: Effects on combustion and emissions. Fuel 197:407–21. doi:10.1016/j.fuel.2017.02.039.
  • Yamamoto, S., Y. Agui, N. Kawaharada, H. Ueki, D. Sakaguchi, and M. Ishida. 2012. Comparison of diesel combustion between ethanol and butanol blended with gas oil. SAE Tech Pap 2012-32-0020. doi:10.4271/2012-32-0020.
  • Yilmaz, N., F. M. Vigil, K. Benalil, S. M. Davis, and A. Calva. 2014. Effect of biodiesel-butanol fuel blends on emissions and performance characteristics of a diesel engine. Fuel 135:46–50. doi:10.1016/j.fuel.2014.06.022.
  • Zhang, M., W. Hong, F. Xie, Y. Su, H. Liu, and S. Zhou. 2018. Combustion, performance and particulate matter emissions analysis of operating parameters on a GDI engine by traditional experimental investigation and Taguchi method. Energy Conversion and Management 164:344–52. doi:10.1016/j.enconman.2018.03.017.
  • Zhang, Z. H., S. M. Chua, and R. Balasubramanian. 2016. Comparative evaluation of the effect of butanol-diesel and pentanol-diesel blends on carbonaceous particulate composition and particle number emissions from a diesel engine. Fuel 176:40–47. doi:10.1016/j.fuel.2016.02.061.
  • Zheng, M., T. Li, and X. Han. 2015. Direct injection of neat n-butanol for enabling clean low temperature combustion in a modern diesel engine. Fuel 142:28–37. doi:10.1016/j.fuel.2014.10.075.
  • Zheng, Z., M. Xia, H. Liu, R. Shang, G. Ma, and M. Yao. 2018. Experimental study on combustion and emissions of n-butanol/biodiesel under both blended fuel mode and dual fuel RCCI mode. Fuel 226:240–51. doi:10.1016/j.fuel.2018.03.151.
  • Zhou, N., M. Huo, H. Wu, K. Nithyanandan, F. L. Chia-fon, and Q. Wang. 2014. Low temperature spray combustion of acetone-butanol-ethanol (ABE) and diesel blends. Applied Energy 117:104–15. doi:10.1016/j.apenergy.2013.11.035.
  • Zhu, J., H. Huang, Z. Zhu, D. Lv, Y. Pan, and H. Wei. 2018. Effect of intake oxygen concentration on diesel – N -butanol blending combustion : An experimental and numerical study at low engine load. Energy Conversion and Management 165:53–65. doi:10.1016/j.enconman.2018.03.045.
  • Zoeldy, M., A. Hollo, and A. Thernesz. 2010. Butanol as a diesel extender option for internal combustion engines. SAE Tech Pap 2010-01-0481. doi:10.4271/2010-01-0481.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.