References
- Ali, O. M., R. Mamat, N. R. Abdullah, and A. A. Abdullah. 2016. Analysis of blended fuel properties and engine performance with palm biodiesel–diesel blended fuel. Renewable Energy 86:59–67. Internet]. https://www.sciencedirect.com/science/article/pii/S0960148115301981.
- Alptekin, E., M. Canakci, and H. Sanli. 2012. Evaluation of leather industry wastes as a feedstock for biodiesel production. Fuel 95:214–20. Internet]. https://www.sciencedirect.com/science/article/pii/S0016236111005291.
- An, H., W. M. Yang, S. K. Chou, and K. J. Chua. 2012. Combustion and emissions characteristics of diesel engine fueled by biodiesel at partial load conditions. Applied Energy 99:363–71. Internet]. https://www.sciencedirect.com/science/article/pii/S0306261912004229.
- Aransiola, E. F., T. V. Ojumu, O. O. Oyekola, T. F. Madzimbamuto, and D. I. O. Ikhu-Omoregbe. 2014. A review of current technology for biodiesel production: State of the art. Biomass and Bioenergy 61:276–97. Internet]. https://linkinghub.elsevier.com/retrieve/pii/S0961953413004893.
- Awad, S., K. Loubar, and M. Tazerout. 2014. Experimental investigation on the combustion, performance and pollutant emissions of biodiesel from animal fat residues on a direct injection diesel engine. Energy 69:826–36. Internet]. https://www.sciencedirect.com/science/article/abs/pii/S0360544214003429.
- Balki, M. K., C. Sayin, and M. Sarikaya. 2016. Optimization of the operating parameters based on Taguchi method in an SI engine used pure gasoline, ethanol and methanol. Fuel 180:630–37. [Internet]. doi:10.1016/j.fuel.2016.04.098.
- Bose, P. K., M. Deb, R. Banerjee, and A. Majumder. 2013. Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approach. Energy 63:375–86. Internet]. https://www.sciencedirect.com/science/article/abs/pii/S0360544213008979.
- Bozbas, K. 2008. Biodiesel as an alternative motor fuel: Production and policies in the European Union. Renewable and Sustainable Energy Reviews 12 (2):542–52. Internet]. https://ideas.repec.org/a/eee/rensus/v12y2008i2p542-552.html.
- BP. 2013. BP statistical review of world energy. [Internet]. http://large.stanford.edu/courses/2013/ph240/lim1/docs/bpreview.pdf.
- BP. 2014. BP statistical review of world energy. [Internet]. https://www.bp.com/content/dam/bp-country/de_de/PDFs/brochures/BP-statistical-review-of-world-energy-2014-full-report.pdf.
- Datta, S., A. Bandyopadhyay, and P. K. Pal. 2008. Grey-based taguchi method for optimization of bead geometry in submerged arc bead-on-plate welding. International Journal, Advanced Manufacturing Ttechnology 39 (11–12):1136–43. Internet]. doi:10.1007/s00170-007-1283-6.
- Deb, M., A. Majumder, R. Banerjee, G. R. K. Sastry, and P. K. Bose. 2014. A Taguchi-fuzzy based multi-objective optimization study on the soot-NOx-BTHE characteristics of an existing CI engine under dual fuel operation with hydrogen. International Journal of Hydrogen Energy 39 (35):20276–93. Internet]. https://www.sciencedirect.com/science/article/pii/S0360319914027669.
- Feroskhan, M., and S. Ismail. 2017. Evaluating the effect of intake parameters on the performance of a biogas–diesel dual-fuel engine using the Taguchi method. Biofuels: 1–9. [Internet]. doi:10.1080/17597269.2017.1370885.
- Ganapathy, T., K. Murugesan, and R. P. Gakkhar. 2009. Performance optimization of Jatropha biodiesel engine model using Taguchi approach. Applied Energy 86 (11):2476–86. Internet]. https://www.sciencedirect.com/science/article/pii/S030626190900052X.
- Gopalsamy, B. M., B. Mondal, and S. Ghosh. 2009. Optimisation of machining parameters for hard machining: Grey relational theory approach and ANOVA. International Journal, Advanced Manufacturing Ttechnology 45 (11–12):1068–86. Internet]. doi:10.1007/s00170-009-2054-3.
- Guivarch, C., S. Hallegatte, and R. Crassous. The resilience of the indian economy to rising oil prices as a validation test for a global energy-environment-economy CGE model. [Internet]. https://pdfs.semanticscholar.org/9f9f/9f1861668ec70204c48a157bcd9e10c2a53f.pdf.
- Haq, A. N., P. Marimuthu, and R. Jeyapaul. 2008. Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method. International Journal, Advanced Manufacturing Ttechnology 37 (3–4):250–55. Internet]. doi:10.1007/s00170-007-0981-4.
- Haşimoğlu, C., M. Ciniviz, İ. Özsert, Y. İçingür, A. Parlak, and M. Sahir Salman. 2008. Performance characteristics of a low heat rejection diesel engine operating with biodiesel. Renewable Energy 33 (7):1709–15. Internet]. https://www.sciencedirect.com/science/article/pii/S0960148107002625.
- Ho, C.-Y., and Z.-C. Lin. 2003. Analysis and application of grey relation and ANOVA in chemical-mechanical polishing process parameters. International Journal, Advanced Manufacturing Ttechnology 21 (1):10–14. Internet]. doi:10.1007/s001700300001.
- Hsu, C.-J., and C.-Y. Huang. 2011. Comparison of weighted grey relational analysis for software effort estimation. Software Quality Journal 19 (1):165–200. Internet]. doi:10.1007/s11219-010-9110-y.
- İlkiliç, C., and R. Behçet. 2010. The reduction of exhaust emissions from a diesel engine by using biodiesel blend. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 32 (9):839–50. Internet]. doi:10.1080/15567030802606269.
- Jeffrey Kuo, C.-F., T.-L. Su, P.-R. Jhang, C.-Y. Huang, and C.-H. Chiu. 2011. Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process with multiple quality characteristics in solar energy collector manufacturing. Energy 36 (5):3554–62. Internet]. https://www.sciencedirect.com/science/article/abs/pii/S0360544211002337.
- Jindal, S., and B. L. Salvi. 2012. Sustainability aspects and optimization of linseed biodiesel blends for compression ignition engine. Journal of Renewable and Sustainable Energy 4 (4):043111. Internet]. doi:10.1063/1.4737922.
- Julong Deynrt, D. 1989. Introduction to Grey system theory. [Internet]. http://www.researchinformation.co.uk/grey/IntroGreySysTheory.pdf.
- Kivevele, T. T., L. Kristóf, Á. Bereczky, and M. M. Mbarawa. 2011. Engine performance, exhaust emissions and combustion characteristics of a CI engine fuelled with croton megalocarpus methyl ester with antioxidant. Fuel 90 (8):2782–89. Internet]. https://www.sciencedirect.com/science/article/pii/S0016236111001906.
- Lin, C. L. 2004. Use of the taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics. Materials and Manufacturing Processes 19 (2):209–20. Internet]. doi:10.1081/AMP-120029852.
- Lin, C. L., J. L. Lin, and T. C. Ko. 2002. Optimisation of the EDM process based on the orthogonal array with fuzzy logic and grey relational analysis method. International Journal, Advanced Manufacturing Ttechnology 19 (4):271–77. Internet]. doi:10.1007/s001700200034.
- Lin, J. L., and C. L. Lin. 2005. The use of grey-fuzzy logic for the optimization of the manufacturing process. Journal of Materials Processing Technology 160 (1):9–14. Internet]. https://www.sciencedirect.com/science/article/pii/S0924013604000731.
- Lin, Y.-C., and H.-S. Lee. 2009. Optimization of machining parameters using magnetic-force-assisted EDM based on gray relational analysis. International Journal, Advanced Manufacturing Ttechnology 42 (11–12):1052–64. Internet]. doi:10.1007/s00170-008-1662-7.
- Majer, S., F. Mueller-Langer, V. Zeller, and M. Kaltschmitt. 2009. Implications of biodiesel production and utilisation on global climate-A literature review. European Journal of Lipid Science and Technology 111:747–62. Internet]. www.ejlst.com.
- Mofijur, M., H. H. Masjuki, M. A. Kalam, A. E. Atabani, I. M. R. Fattah, and H. M. Mobarak. 2014. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine. Industrial crops and products 53:78–84. Internet]. https://www.sciencedirect.com/science/article/pii/S0926669013006882.
- Muqeem, M., A. F. Sherwani, M. Ahmad, and Z. A. Khan. 2017. Taguchi-based combined grey relational and principal component analyses for multi-response optimization of diesel engines. Grey Systems: Theory and Application 7 (3):408–25. Internet]. doi:10.1108/GS-05-2017-0013.
- Nalbant, M., H. Gökkaya, and G. Sur. 2007. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning. Materials and Design 28 (4):1379–85. Internet]. https://www.sciencedirect.com/science/article/pii/S0261306906000173.
- Narasimha, C., and M. Rajesh. 2013. Performance and emissions characteristics of diesel engine fuelled with rice Bran oil. International Journal of Engineering Trends and Technology 4. [Internet]. http://www.ijettjournal.org
- National policy on biofuels. [Internet]. https://mnre.gov.in/file-manager/UserFiles/biofuel_policy.pdf.
- Nayak, S. K., and B. P. Pattanaik. 2014. Experimental investigation on performance and emission characteristics of a diesel engine fuelled with Mahua biodiesel using additive. Energy Procedia 54:569–79. Internet]. https://www.sciencedirect.com/science/article/pii/S1876610214011758.
- Ong, H. C., H. H. Masjuki, T. M. I. Mahlia, A. S. Silitonga, W. T. Chong, and K. Y. Leong. 2014a. Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum inophyllum oil in CI diesel engine. Energy Conversion and Management 81:30–40. Internet]. https://www.sciencedirect.com/science/article/pii/S0196890414001204.
- Ong, H. C., H. H. Masjuki, T. M. I. Mahlia, A. S. Silitonga, W. T. Chong, and T. Yusaf. 2014b. Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine. Energy 69:427–45. Internet]. https://www.sciencedirect.com/science/article/abs/pii/S0360544214002990.
- Öztürk, E. 2015. Performance, emissions, combustion and injection characteristics of a diesel engine fuelled with canola oil–hazelnut soapstock biodiesel mixture. Fuel Processing Technology 129:183–91. Internet]. https://www.sciencedirect.com/science/article/pii/S0378382014003877.
- Pal, S., S. K. Malviya, S. K. Pal, and A. K. Samantaray. 2009. Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method. International Journal, Advanced Manufacturing Ttechnology 44 (11–12):1250–60. Internet]. doi:10.1007/s00170-009-1931-0.
- Palanikumar, K. 2008. Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling. International Journal, Advanced Manufacturing Ttechnology 36 (1–2):19–27. Internet]. doi:10.1007/s00170-006-0811-0.
- Pandey, R. K., and S. S. Panda. 2014. Optimization of bone drilling parameters using grey-based fuzzy algorithm. Measurement 47 (1):386–92. Internet]. https://linkinghub.elsevier.com/retrieve/pii/S0263224113004430.
- Pawade, R. S., and S. S. Joshi. 2011. Multi-objective optimization of surface roughness and cutting forces in high-speed turning of Inconel 718 using Taguchi Grey Relational Analysis (TGRA). International Journal, Advanced Manufacturing Ttechnology 56 (1–4):47–62. Internet]. doi:10.1007/s00170-011-3183-z.
- Pinzi, S., I. L. Garcia, F. J. Lopez-Gimenez, M. D. Luque de Castro, G. Dorado, and M. P. Dorado. 2009. The ideal vegetable oil-based biodiesel composition: A review of social, economical and technical implications. Energy & Fuels 23 (5):2325–41. [Internet]. doi:10.1021/ef801098a.
- Qi, D. H., L. M. Geng, H. Chen, Y. Z. Bian, J. Liu, and X. C. Ren. 2009. Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil. Renewable Energy 34 (12):2706–13. Internet]. https://www.sciencedirect.com/science/article/pii/S0960148109002195.
- Rajmohan, T., K. Palanikumar, and S. P.-C. P. B. Engineering. 2013 undefined. Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites. Elsevier [Internet]. https://www.sciencedirect.com/science/article/pii/S1359836813000851.
- Rizwanul Fattah, I. M., M. A. Kalam, H. H. Masjuki, and M. A. Wakil. 2014. Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil. RSC advances 4 (34):17787–96. Internet]. http://xlink.rsc.org/?DOI=C3RA47954D.
- Roy, S., A. K. Das, and R. Banerjee. 2014. Application of Grey–Taguchi based multi-objective optimization strategy to calibrate the PM–NHC–BSFC trade-off characteristics of a CRDI assisted CNG dual-fuel engine. Journal of natural gas science and engineering 21:524–31. Internet]. https://www.sciencedirect.com/science/article/abs/pii/S1875510014002820.
- Roy, S., A. K. Das, and R. Banerjee. 2016. Grey-Fuzzy Taguchi approach for multi-objective optimization of performance and emission parameters of a single cylinder crdi engine coupled with EGR. International Journal of Automotive Technology 17 (1):1–12. Internet]. doi:10.1007/s12239-016-0001-5.
- Saleh, H. E. 2009. Effect of exhaust gas recirculation on diesel engine nitrogen oxide reduction operating with jojoba methyl ester. Renewable Energy 34 (10):2178–86. Internet]. https://www.sciencedirect.com/science/article/pii/S0960148109001165.
- Saravanan, S., G. Nagarajan, and S. Sampath. 2010. Multi response optimization of NOx emission of a stationary diesel engine. Fuel 89 (11):3235–40. Internet]. https://www.sciencedirect.com/science/article/pii/S0016236110002395.
- Shahir, V. K., C. P. Jawahar, and P. R. Suresh. 2015. Comparative study of diesel and biodiesel on CI engine with emphasis to emissions—A review. Renewable and Sustainable Energy Reviews 45:686–97. Internet]. https://www.sciencedirect.com/science/article/pii/S1364032115001306.
- Tosun, N. 2006. Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysis. International Journal, Advanced Manufacturing Ttechnology 28 (5–6):450–55. Internet]. doi:10.1007/s00170-004-2386-y.
- Tüccar, G., E. Tosun, T. Özgür, and K. Aydın. 2014. Diesel engine emissions and performance from blends of citrus sinensis biodiesel and diesel fuel. Fuel 132:7–11. Internet]. https://www.sciencedirect.com/science/article/pii/S0016236114004001.
- Venkatanarayana, B., and C. Ratnam. 2017. Selection of optimal performance parameters of DI diesel engine using Taguchi approach. Biofuels 7269 (June):1–8. doi:10.1080/17597269.2017.1329492.
- Yang, W. H., and Y. S. Tarng. 1998. Design optimization of cutting parameters for turning operations based on the Taguchi method. Journal of Materials Processing Technology 84 (1–3):122–29. Internet]. https://www.sciencedirect.com/science/article/pii/S092401369800079X.
- Yeh, J., and T. T.-M. Reliability. 2014 undefined. Optimizing the fine-pitch copper wire bonding process with multiple quality characteristics using a grey-fuzzy Taguchi method. Elsevier [Internet]. https://www.sciencedirect.com/science/article/pii/S002627141300334X.