Effect of nano cerium oxide additive with tire oil blends on diesel engine combustion and emissions parameters with soot morphology analysis

References

• Abdalla, S., R. AL-Wafi, and A. Pizzi. 2017. Stability and combustion of metal nano-particles and their additive impact with diesel and biodiesel on engine efficiency: A comprehensive study. Journal of Renewable and Sustainable Energy 9:22701. doi:10.1063/1.4979962.
   Web of Science ®Google Scholar
• Appavu, P., M. Venkata Ramanan, and H. Venu. 2019. Quaternary blends of diesel/biodiesel/vegetable oil/pentanol as a potential alternative feedstock for existing unmodified diesel engine: Performance, combustion and emission characteristics. Energy 186 (2019):115856. doi:10.1016/j.energy.2019.115856.
   Google Scholar
• Appavu, P., V. Venkata Ramanan, J. Jayaraman, and H. Venu. 2019. NOx emission reduction techniques in biodiesel-fuelled CI engine: A review. Australian Journal of Mechanical Engineering 1–11. doi:10.1080/14484846.2019.1596527.
   Web of Science ®Google Scholar
• Bahmanyar, A., N. Khoobi, M. R. Mozdianfard, and H. Bahmanyar. 2011. The influence of nanoparticles on hydrodynamic characteristics and mass transfer performance in a pulsed liquid–liquid extraction column. Chemical Engineering and Processing: Process Intensification 50 (11–12):1198–206. doi:10.1016/j.cep.2011.08.008.
   Web of Science ®Google Scholar
• Bazooyar, B., N. Hallajbashi, A. Shariati, and A. Ghorbani. 2014. An Investigation of the effect of input air upon combustion performance and emissions of biodiesel and diesel fuel in an experimental boiler. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 36 (4):383–92. doi:10.1080/15567036.2010.538810.
   Web of Science ®Google Scholar
• Bazooyar, B., S. Y. Hosseini, S. M. G. Begloo, A. Shariati, S. H. Hashemabadi, and F. Shaahmadi. 2018. Mixed modified Fe2O3-WO3 as new fuel borne catalyst (FBC) for biodiesel fuel. Energy 149:438–53. doi:10.1016/j.energy.2018.02.062.
   Web of Science ®Google Scholar
• Chandran, M., P. Rajamamundi, and A. C. Kit. 2017. Tire oil from waste tire scraps using novel catalysts of manufacturing sand (M Sand) and TiO2: Production and FTIR analysis. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 39 (18):1928–34. doi:10.1080/15567036.2017.1390010.
   Web of Science ®Google Scholar
• Chandran, M., S. Tamilkolundu, and C. Murugesan. 2018. Investigation of the performance, combustion parameters, and emissions analysis on DI engine using two staged distilled waste plastic oil-diesel blends. Thermal Science 22 (3):1469–80. doi:10.2298/TSCI170501067C.
   Web of Science ®Google Scholar
• Chiranjeeva Rao, S., B. Ravi Sankar, D. Kishore, and M. V. S. Babu. 2019. Experimental analysis on a DI diesel engine with cerium-oxide-added mahua methyl ester blends. International Journal of Ambient Energy 40 (1):49–53. doi:10.1080/01430750.2017.1360203.
   Web of Science ®Google Scholar
• Dale, J. G., S. S. Cox, M. E. Vance, L. C. Marr, and Hochella. 2017. Transformation of cerium oxide nanoparticles from a diesel fuel additive during combustion in a diesel engine. Environmental Science & Technology 51 (4):1973–80. doi:10.1021/acs.est.6b03173.
   PubMed Web of Science ®Google Scholar
• Gantt, B., K. M. ShamiaHoque, R. D. Fahey, J. Willis, M. Delgado-Saborit, R. M. Harrison, K. M. Zhang, D. A. Jefferson, M. Kalberer, K. L. Bunker, et al. 2015. Factors affecting the ambient physicochemical properties of cerium-containing particles generated by nanoparticle diesel fuel additive use. Aerosol Science and Technology 49 (6):371–80. doi:10.1080/02786826.2015.1027809.
   Web of Science ®Google Scholar
• Harper, E. 2018. High performance and transformational nanomaterials. http://www.cerionenergy.com/.
   Google Scholar
• Hossain, N., T. M. I. Mahlia, and R. Saidur. 2019. Latest development in microalgae-biofuel production with nano-additives. Biotechnology for Biofuels 12 (1):125. doi:10.1186/s13068-019-1465-0.
   PubMedGoogle Scholar
• Karthikeyan, S., and A. Prathima. 2016. Environmental effects emission analysis of the effect of doped nano- additives on biofuel in a diesel engine. Energy Sources, Part A Recovery Utilization and Environmental Effects 38 (24):3702–08. doi:10.1080/15567036.2016.1166164.
   Web of Science ®Google Scholar
• Khond, V. W., and V. M. Kriplani. 2019. Experimental investigation and modeling of the evaporation rate of carbon nanotube blended emulsified neem biodiesel. Biofuels 10 (4):485–91. doi:10.1080/17597269.2017.1323322.
   Web of Science ®Google Scholar
• Pivkina, A., P. Ulyanova, Y. Frolov, S. Zavyalov, and J. Schoonman. 2004. Nanomaterials for heterogeneous combustion. Propellants Explosives, Pyrotechnics 29 (1):39–48. doi:10.1002/prep.200400025.
   Web of Science ®Google Scholar
• Risha, G., E. Boyer, R. Wehrman, B. Evans, and K. Kuo 2003. Nano-sized aluminum and boron-based solid fuel characterization in a hybrid rocket engine. 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama.
   Google Scholar
• Sajith, V., C. B. Sobhan, and G. P. Peterson. 2010. Experimental investigations on the effects of cerium oxide nanoparticle fuel additives on biodiesel. Article ID 581407. 6. doi:10.1155/2010/581407.
   Google Scholar
• Saraee, H. S., H. Taghavifar, and S. Jafarmadar. 2017. Experimental and numerical consideration of the effect of CeO 2 nanoparticles on diesel engine performance and exhaust emission with the aid of artificial neural network. Applied Thermal Engineering 113:663–72. doi:10.1016/j.applthermaleng.2016.11.044.
   Web of Science ®Google Scholar
• SenthilKumar, S., and K. Rajan. 2019. Performance and emission characteristics of diesel engine using biodiesel with the effect of dimethyl carbonate (DMC) fumigation. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–13. doi:10.1080/15567036.2019.1654565.
   Web of Science ®Google Scholar
• Solero, G. 2012. Experimental analysis of the influence of inert nano-additives upon combustion of diesel sprays. Nanoscience and Nanotechnology 2 (4):129–33. doi:10.5923/j.nn.20120204.07.
   Google Scholar
• Tyagi, H., E. Phelan Patrick, P. Ravi, P. Robert, L. Taewoo, and R. Pacheco Jose. 2008. Increased hot plate ignition probability for nanoparticle-laden diesel fuel. Nano Letters 8:1410–16. doi:10.1021/nl080277d.
   PubMed Web of Science ®Google Scholar
• Unapumnuk, K., T. C. Keener, M. Lu, and S.-J. Khang. 2006. Pyrolysis behavior of tire-derived fuels at different temperatures and heating rates. Journal of the Air & Waste Management Association 56 (5):618–27. doi:10.1080/10473289.2006.10464481.
   Web of Science ®Google Scholar
• Vairamuthu, G., S. Sundarapandian, C. Kailasanathan, and B. Thangagiri. 2015. Experimental investigation on the effects of cerium oxide nanoparticle on calophylluminophyllum (PUNNAI) biodiesel blended with diesel fuel in DI diesel engine modified by nozzle geometry. Journal of the Energy Institute 89 (4):668–82. doi:10.1016/j.joei.2015.05.005.
   Web of Science ®Google Scholar
• Venu, H., and P. Appavu. 2019. Experimental studies on the influence of zirconium nanoparticle on biodiesel–diesel fuel blend in CI engine. International Journal of Ambient Energy 1–7. doi:10.1080/01430750.2019.1611653.
   Google Scholar
• Venua, H., and P. Appavub. 2020. Al2O3 nano additives blended polanga biodiesel as a potential alternative fuel for existing unmodified DI diesel engine. Fuel 279:118518. doi:10.1016/j.fuel.2020.118518.
   Web of Science ®Google Scholar