183
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Extraction and utilization of biodiesel from tannery fleshing waste in a diesel engine equipped with common rail direct injection system for cleaner emission

ORCID Icon &
Received 23 Sep 2020, Accepted 03 Mar 2021, Published online: 15 Mar 2021

References

  • Altun, S., and Y. Fevzi. 2013. “Biodiesel Production from Leather Industry Wastes as an Alternative Feedstock and its Use in Diesel Engines.”. Energy Exploration & Exploitation 31 (5):759–70. doi:10.1260/0144-5987.31.5.759..
  • Bragadeshwaran, A., N. Kasianantham, S. Balusamy, M. SenthilKumar, S. R. Dandu Madhu, V. S. Randive, A. P. Nashte, and S. Rayapati. 2018. “Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel.”. Environmental Science and Pollution Research 25 (25):25098–114. doi:10.1007/s11356-018-2574-1..
  • Damodharan, D., K. Gopal, A. P. Sathiyagnanam, B. Rajesh Kumar, M. V. Depoures, and N. Mukilarasan. 2018a. “Performance and emission study of a single cylinder diesel engine fuelled with n -octanol/WPO with some modifications.”. International Journal of Ambient Energy 1–10. doi:10.1080/01430750.2018.1563824..
  • Damodharan, D., B. Rajesh Kumar, K. Gopal, P. Melvin Victor De, and B. Sethuramasamyraja. 2019. “Utilization of waste plastic oil in diesel engines: A review.”. Reviews in Environmental Science and Bio/Technology 18 (4):681–97. doi:10.1007/s11157-019-09516-x..
  • Damodharan, D., A. P. Sathiyagnanam, B. R. Kumar, and K. C. Ganesh. 2018b. “Cleaner emissions from a DI diesel engine fueled with waste plastic oil derived from municipal solid waste under the influence of n-pentanol addition, cold EGR, and injection timing.”. Environmental Science and Pollution Research 25 (14):13611–25. doi:10.1007/s11356-018-1558-5..
  • Dhana Raju, V., P. S. Kishore, K. Nanthagopal, and B. Ashok. 2018. “An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications.”. Energy Conversion and Management 164:655–66. doi:10.1016/j.enconman.2018.03.032..
  • Duraisamy, K., R. Ismailgani, S. A. Paramasivam, G. Kaliyaperumal, and D. Dillikannan. 2020. “Emission profiling of a common rail direct injection diesel engine fueled with hydrocarbon fuel extracted from waste high density polyethylene as a partial replacement for diesel with some modifications.”. Energy & Environment 0958305X2094287. doi:10.1177/0958305X20942873..
  • Gulum, M., and A. Bilgin. 2018. “An Experimental Optimization Research of Methyl and Ethyl Esters Production from Safflower Oil.”. Environmental and Climate Technologies 22 (1):132–48. doi:10.2478/rtuect-2018-0009..
  • Gulum, M., and A. Bilgin. 2019. “Measurement and Prediction of Density and Viscosity of Different Diesel-Vegetable Oil Binary Blends.”. Environmental and Climate Technologies 23 (1):214–28. doi:10.2478/rtuect-2019-0014..
  • Gülüm, M., and A. Bilgin. 2019. “Two-dimensional surface models to predict the density of biodiesel-diesel-alcohol ternary blends.”. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–71. doi:10.1080/15567036.2019.1630034..
  • Gulum, M., F. K. Onay, and A. Bilgin. 2018. “Evaluation of Predictive Capabilities of Regression Models and Artificial Neural Networks for Density and Viscosity Measurements of Different Biodiesel-Diesel-Vegetable Oil Ternary Blends.”. Environmental and Climate Technologies 22 (1):179–205. doi:10.2478/rtuect-2018-0012..
  • Gülüm, M., F. K. Onay, and A. Bilgin. 2018. “Comparison of viscosity prediction capabilities of regression models and artificial neural networks.”. Energy 161:361–69. doi:10.1016/j.energy.2018.07.130..
  • Gülüm, M., M. K. Yesilyurt, and A. Bilgin. 2019. “The performance assessment of cubic spline interpolation and response surface methodology in the mathematical modeling to optimize biodiesel production from waste cooking oil.”. Fuel 255:115778. doi:10.1016/j.fuel.2019.115778..
  • Gülüm, M., M. K. Yesilyurt, and A. Bilgin. 2020. “The modeling and analysis of transesterification reaction conditions in the selection of optimal biodiesel yield and viscosity.”. Environmental Science and Pollution Research 27 (10):10351–66. doi:10.1007/s11356-019-07473-0..
  • İşler, A., S. Serap, T. Melek, and K. Filiz. 2010. “Transesterification reaction of the fat originated from solid waste of the leather industry.”. Waste Management 30 (12):2631–35. doi:10.1016/j.wasman.2010.06.005..
  • Jayaprabakar, J., S. S. Dawn, A. Ranjan, P. Priyadharsini, R. J. George, S. Sadaf, and C. Rajeswara Rajha. 2019. “Process optimization for biodiesel production from sheep skin and its performance, emission and combustion characterization in CI engine.”. Energy 174:54–68. doi:10.1016/j.energy.2019.02.140..
  • Karthickeyan, V., S. Thiyagarajan, B. Ashok, V. Edwin Geo, and A. K. Azad. 2020. “Experimental investigation of pomegranate oil methyl ester in ceramic coated engine at different operating condition in direct injection diesel engine with energy and exergy analysis.”. Energy Conversion and Management 205:112334. doi:10.1016/j.enconman.2019.112334..
  • Keskin, A., M. Şen, and A. O. Emiroğlu. 2020. “Experimental studies on biodiesel production from leather industry waste fat and its effect on diesel engine characteristics.”. Fuel 276:118000. doi:10.1016/j.fuel.2020.118000..
  • Kubendran, D., R. S. A. Abdur, A. Thanarasu, T. Devaraj, Y. Mani, and S. Subramanian. 2017. “Utilization of leather fleshing waste as a feedstock for sustainable biodiesel production.”. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–7. doi:10.1080/15567036.2017.1349218..
  • Lazaroiu, G., C. Pană, L. Mihaescu, A. Cernat, N. Negurescu, R. Mocanu, and G. Negreanu. 2017. “Solutions for energy recovery of animal waste from leather industry.”. Energy Conversion and Management 149:1085–95. doi:10.1016/j.enconman.2017.06.042..
  • Moffat, R. J. 1985. “Using uncertainty analysis in the planning of an experiment.”. Journal of Fluids Engineering 107 (2):173–78. doi:10.1115/1.3242452.
  • Nantha Gopal, K., B. Ashok, K. Senthil Kumar, R. Thundil Karuppa Raj, S. Denis Ashok, V. Varatharajan, and V. Anand. 2018. “Performance analysis and emissions profile of cottonseed oil biodiesel–ethanol blends in a CI engine.”. Biofuels 9 (6):711–18. doi:10.1080/17597269.2017.1306679..
  • Nanthagopal, K., B. Ashok, B. Saravanan, M. Ramesh Pathy, G. Sahil, A. Ramesh, M. N. Nabi, and M. G. Rasul. 2019. “Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine.”. Fuel 239:862–73. doi:10.1016/j.fuel.2018.11.037..
  • Rajasekaran, S., D. Damodharan, K. Gopal, B. Rajesh Kumar, and P. Melvin Victor De. 2020. “Collective influence of 1-decanol addition, injection pressure and EGR on diesel engine characteristics fueled with diesel/LDPE oil blends.”. Fuel 277:118166. doi:10.1016/j.fuel.2020.118166..
  • Rajesh, A., K. Gopal, V. B. De Poures Melvin, A. P. Rajesh Kumar, and D. Damodharan. 2020. “Effect of anisole addition to waste cooking oil methyl ester on combustion, emission and performance characteristics of a DI diesel engine without any modifications.”. Fuel 278:118315. doi:10.1016/j.fuel.2020.118315..
  • Ramesh, A., B. Ashok, K. Nanthagopal, M. Ramesh Pathy, A. Tambare, P. Mali, P. Phuke, S. Patil, and R. Subbarao. 2019. “Influence of hexanol as additive with Calophyllum Inophyllum biodiesel for CI engine applications.”. Fuel 249:472–85. doi:10.1016/j.fuel.2019.03.072..
  • Ranjitha, J., S. Gokul Raghavendra, S. Vijayalakshmi, and B. Deepanraj. 2020. “Production, optimisation and engine characteristics of beef tallow biodiesel rendered from leather fleshing and slaughterhouse wastes.”. Biomass Conversion and Biorefinery 10 (3):675–88. doi:10.1007/s13399-019-00501-6..
  • Sharbuddin Ali, S., and M. R. Swaminathan. 2020. “Effective utilization of waste cooking oil in a diesel engine equipped with CRDi system using C8 oxygenates as additives for cleaner emission.”. Fuel 275:118003. doi:10.1016/j.fuel.2020.118003..
  • Sundar, J., A. G. Victor, C. Muralidharan, N. K. Chandrababu, and A. B. Mandal. 2011. “Recovery and utilization of proteinous wastes of leather making: A review.”. Reviews in Environmental Science and Bio/Technology 10 (2):151–63. doi:10.1007/s11157-010-9223-6..

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.