306
Views
2
CrossRef citations to date
0
Altmetric
Research Article

CFD analysis for the performance improvement of a double pipe heat exchanger with twisted tape having triangular cut

ORCID Icon &
Received 21 Dec 2020, Accepted 16 Jun 2021, Published online: 06 Aug 2021

References

  • Abed, A. M., H. Sh Majdi, Z. Hussein, D. Fadhil, and A. Abdulkadhim. 2018. Numerical analysis of flow and heat transfer enhancement in a horizontal pipe with P-TT and V-Cut twisted tape. Case Studies in Thermal Engineering 12:749–58. doi:10.1016/j.csite.2018.10.004.
  • Agung Tri Wijayanta, Pranowo, Mirmanto, Budi Kristiawan and Muhammad Aziz. 2019. Internal Flow in an Enhanced Tube Having. Energies. 1–12. doi:10.3390/en12020306. https://www.mdpi.com/1996-1073/12/2/306
  • Bergles, A. E. 2013. Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes : Part II — Transition and Turbulent Flows.:Journal of heat transfer 115: 890-896 November. 1993. https://asmedigitalcollection.asme.org/heattransfer/article-abstract/115/4/890/411461/Heat-Transfer-and-Pressure-Drop-Correlations-for?redirectedFrom=fulltext
  • Dandoutiya, B. K., and A. Kumar. 2019. A Review on Nano Fluids for Solar Collector Application. SSRN Electronic Journal 1–10. doi:10.2139/ssrn.3442589.
  • El Maakoul, A., A. Laknizi, S. Saadeddine, A. Ben Abdellah, M. Meziane, and M. El Metoui. 2017. Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger. Energy Conversion and Management 133:76–86. doi:10.1016/j.enconman.2016.12.002.
  • Hasanpour, A., M. Farhadi, and K. Sedighi. 2016. Experimental heat transfer and pressure drop study on typical, perforated, V-cut and U-cut twisted tapes in a helically corrugated heat exchanger. International Communications in Heat and Mass Transfer 71:126–36. doi:10.1016/j.icheatmasstransfer.2015.12.032.
  • He, Y., L. Liu, P. Li, and L. Ma. 2018. Experimental study on heat transfer enhancement characteristics of tube with cross hollow twisted tape inserts. Applied Thermal Engineering 131:743–49. doi:10.1016/j.applthermaleng.2017.12.029.
  • Mukesh Kumar, P. C., and M. Chandrasekar. 2019. CFD analysis on heat and flow characteristics of double helically coiled tube heat exchanger handling MWCNT/water nanofluids. Heliyon 5 (7):e02030. doi:10.1016/j.heliyon.2019.e02030.
  • Murali, G., B. Nagendra, and J. Jaya. 2020. CFD analysis on heat transfer and pressure drop characteristics of turbulent flow in a tube fitted with trapezoidal-cut twisted tape insert using Fe3O4 nano fluid. Materials Today: Proceedings 21:313–19. doi:10.1016/j.matpr.2019.05.451.
  • Murugesan, P., K. Mayilsamy, S. Suresh, and P. S. S. Srinivasan. 2011. Heat transfer and pressure drop characteristics in a circular tube fitted with and without V-cut twisted tape insert. International Communications in Heat and Mass Transfer 38 (3):329–34. doi:10.1016/j.icheatmasstransfer.2010.11.010.
  • Nakhchi, M. E., and J. A. Esfahani. 2019a. Numerical investigation of rectangular-cut twisted tape insert on performance improvement of heat exchangers. International Journal of Thermal Sciences 138:75–83. doi:10.1016/j.ijthermalsci.2018.12.039.
  • Nakhchi, M. E., and J. A. Esfahani. 2019b. Performance intensification of turbulent flow through heat exchanger tube using double V-cut twisted tape inserts. Chemical Engineering and Processing - Process Intensification 141:107533. doi:10.1016/j.cep.2019.107533.
  • Prasad, S. L. 2013. EFFECTIVENESS AND THERMAL PERFORMANCE ANALYSIS OF COPPER. Heat Transfer Research 44 (3–4):245–72. doi:10.1615/HeatTransRes.2012006187.
  • Qi, C., T. Luo, M. Liu, F. Fan, and Y. Yan. 2019. Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment. Energy Conversion and Management 197 (August):111877. doi:10.1016/j.enconman.2019.111877.
  • Rahimi, M., S. R. Shabanian, and A. A. Alsairafi. 2009. Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts. Chemical Engineering and Processing: Process Intensification 48 (3):762–70. doi:10.1016/j.cep.2008.09.007.
  • Ravi Kumar, N. T., P. Bhramara, A. Kirubeil, L. Syam Sundar, M. K. Singh, and A. C. M. Sousa. 2018. Effect of twisted tape inserts on heat transfer, friction factor of Fe3O4 nanofluids flow in a double pipe U-bend heat exchanger. International Communications in Heat and Mass Transfer 95 (April):53–62. doi:10.1016/j.icheatmasstransfer.2018.03.020.
  • Shahril, S. M., G. A. Quadir, N. A. M. Amin, and I. A. Badruddin. 2017. Thermo hydraulic performance analysis of a shell-and-double concentric tube heat exchanger using CFD. International Journal of Heat and Mass Transfer 105:781–98. doi:10.1016/j.ijheatmasstransfer.2016.10.021.
  • Sheikholeslami, M., and D. D. Ganji. 2016. Heat transfer improvement in a double pipe heat exchanger by means of perforated turbulators. Energy Conversion and Management 127:112–23. doi:10.1016/j.enconman.2016.08.090.
  • Sheikholeslami, M., M. Gorji-Bandpy, and D. D. Ganji. 2016. Effect of discontinuous helical turbulators on heat transfer characteristics of double pipe water to air heat exchanger. Energy Conversion and Management 118:75–87. doi:10.1016/j.enconman.2016.03.080.
  • Singh, S. K., and A. Kumar. 2019. An effect of twisted tape with nanofluid on the performance of double pipe heat exchanger: A comprehensive review. International Journal of Mechanical and Production Engineering Research and Development 9 (1):531–40. doi:10.24247/ijmperdfeb201951.
  • Singh, S. K., and A. Kumar. 2020. Advances in heat transfer enhancement using twisted tape inserts with and without nanofluid. International Journal of Mechanical and Production Engineering Research and Development 10 (1):157–74. doi:10.24247/ijmperdfeb202014.
  • Soltani, M., P. Farzanehkhameneh, and F. Moradi. 2021, August. Optimization and energy assessment of geothermal heat exchangers for different circulating fluids. ( 2020) Energy Conversion and Management 228:113733. doi: 10.1016/j.enconman.2020.113733.
  • Syed, K. S., M. Ishaq, Z. Iqbal, and A. Hassan. 2015. Numerical study of an innovative design of a finned double-pipe heat exchanger with variable fin-tip thickness. Energy Conversion and Management 98:69–80. doi:10.1016/j.enconman.2015.03.038.
  • Taylor, P., C. T. Joen, M. De Paepe, and F. Vanhee. 2006. Experimental Heat Transfer : A Journal of Thermal Energy Generation, Transport, Storage, and Conversion Heat Exchanger Behavior in Non Uniform Flow. August. 2013. Experimental heat transfer. 37–41. 10.1080/08916150600623382.
  • Wijayanta, A. T., I. Yaningsih, M. Aziz, T. Miyazaki, and S. Koyama. 2018. Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger. Applied Thermal Engineering 145:27–37. doi:10.1016/j.applthermaleng.2018.09.009.
  • Wijayanta, A. T., and M. Aziz. 2019. Heat transfer augmentation of internal flow using twisted tape insert in turbulent flow. Heat transfer engineering. ,1288–1300. doi:10.1080/01457632.2019.1637149.
  • Wongcharee, K., and S. Eiamsa-ard. 2011. Heat transfer enhancement by twisted tapes with alternate-axes and triangular, rectangular and trapezoidal wings. Chemical Engineering and Processing: Process Intensification 50 (2):211–19. doi:10.1016/j.cep.2010.11.012.
  • Yaningsih, I., and A. T. Wijayanta. 2017. Concentric Tube Heat Exchanger Installed by Twisted Tapes using Various Wings with Alternate Axes. AIP Conference Proceedings. 030005. https://aip.scitation.org/doi/abs/10.1063/1.4968258

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.