Heat transfer and friction factor correlations for double pipe heat exchanger with inner and outer corrugation

References

• aaa. Ansys Fluent 19.0, User´s Guide, Fluent Inc, 2018.
   Google Scholar
• Ajeel, R. K., W. S.-I. W. Salim, and K. Hasnan. February 1 2019. Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer 101: 1–9. doi:10.1016/j.icheatmasstransfer.2018.12.016.
   Web of Science ®Google Scholar
• Alzahran, S., M. Islam, and S. Saha. February 2019. A thermo-hydraulic characteristics investigation in corrugated plate heat exchanger. Energy Procedia 1(160):597–605.
   Google Scholar
• Bhuiya, M. M., A. K. Azad, M. S. Chowdhury, and M. Saha. May 2016a. Heat transfer augmentation in a circular tube with perforated double counter twisted tape inserts. International Communications in Heat and Mass Transfer 1(74):18–26. doi: 10.1016/j.icheatmasstransfer.2016.03.001.
   Google Scholar
• Bhuiya, M. M. K., M. S. Chowdhury, J. U. Ahamed, and A. K. Azad. 2016bJanuary1.Heat transfer performance evaluation and prediction of correlation for turbulent flow through a tube with helical tape inserts at higher Reynolds number. Heat and Mass Transfer 526: 1219–30.doi: 10.1007/s00231-015-1643-y
   Web of Science ®Google Scholar
• Corcolesa, J. I., J. F. Belmontea, A. E. Molinaa, and J. A. Almendros-Ibanez. 2019. Influence of corrugation shape on heat transfer performance in corrugated tubes using numerical simulations. International Journal of Thermal Sciences 137:262–75. doi:10.1016/j.ijthermalsci.2018.11.021.
   Web of Science ®Google Scholar
• Corcoles-Tendero, J. I., J. F. Belmonte, A. E. Molina, and J. A. Almendros-Ibanez. 2018. Numerical simulation of the heat transfer process in a corrugated tube. International Journal of Thermal Sciences 126:125–36. doi:10.1016/j.ijthermalsci.2017.12.028.
   Web of Science ®Google Scholar
• Dellil, A. Z. 2014January1.Numerical simulation of a spiral wall. Mechanics 21: 42–48.doi: 10.5755/j01.mech.20.1.6589
   Google Scholar
• Dittus, F. W., and L. M. K. Boelter. 1930. Heat Transfer in automobile radiators of the tubular tube. Pub. Eng 2:443.
   Google Scholar
• Fernandes, C. S., R. P. Dias, J. M. Nobrega, and J. M. Maia. September 1, 2007. Laminar flow in chevron-type plate heat exchangers: CFD analysis of tortuosity, shape factor and friction factor. Chemical Engineering and Processing: Process Intensification 46 (9):825–33.
   Web of Science ®Google Scholar
• Freund, S., and S. Kabelac. September 1, 2010. Investigation of local heat transfer coefficients in plate heat exchangers with temperature oscillation IR thermography and CFD. International Journal of Heat and Mass Transfer 53 (19–20):3764–81.
   Web of Science ®Google Scholar
• Haervig, J., K. Sorensen, and T. J. Condra. March 2017. On the fully-developed heat transfer enhancing flow field in sinusoidally, spirally corrugated tubes using computational fluid dynamics. International Journal of Heat and Mass Transfer 106(106):1051–62. doi: 10.1016/j.ijheatmasstransfer.2016.10.080.
   Google Scholar
• Han, H.-Z., B.-X. Li, B.-Y. Yu, Y.-R. He, and F.-C. Li. 2012December1.Numerical study of flow and heat transfer characteristics in outward convex corrugated tubes. International Journal of Heat and Mass Transfer 5525–26: 7782–802.doi: 10.1016/j.ijheatmasstransfer.2012.08.007
   Web of Science ®Google Scholar
• Harle, A., E. Franz, and M. Breuer. 2017. Heat transfer and friction characteristics of fully developed gas flow in cross-corrugated tubes. International Journal of Heat and Mass Transfer 107:1076–84. doi:10.1016/j.ijheatmasstransfer.2016.10.129.
   Web of Science ®Google Scholar
• Jaisankar, S., T. K. Radhakrishnan, K. N. A. Sheeba, and S. Suresh. 2009. Experimental investigation of heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of Left–Right twisted tapes, Energy Convers. Manage. Vole 50:2638–49.
   Google Scholar
• Kandlikar, S., S. Garimella, D. Li, S. Colin, and K. MR. 2005. Heat transfer and fluid flow in minichannels and microchannels. Theobalds Road London WCIX 8RR, UK: Elsevier.
   Google Scholar
• Khoshvaght-Aliabadi, M., and A. Feizabadi. 2020. Compound heat transfer enhancement of helical channel with corrugated wall structure. International Journal of Heat and Mass Transfer 146:118858. doi:10.1016/j.ijheatmasstransfer.2019.118858.
   Web of Science ®Google Scholar
• Kumar, R., and P. Chandra. 2020April17.Thermal analysis, pressure drop and exergy loss of energy efficient shell, and triple meshed helical coil tube heat exchanger. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 428: 1026–39.doi: 10.1080/15567036.2019.1602213
   Web of Science ®Google Scholar
• Li, Y.-X., J.-H. Wu, H. Wang, L.-P. Kou, and X.-H. Tian. 2012. Fluid flow and heat transfer characteristics in helical tubes cooperating with spiral corrugation. Energy Procedia 17:791–800. doi:10.1016/j.egypro.2012.02.172.
   Google Scholar
• Naphon, P., M. Nuchjapo, and J. Kurujareon. 2006November1.Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib. Energy Conversion and Management 4718–19: 3031–44.doi: 10.1016/j.enconman.2006.03.023
   Web of Science ®Google Scholar
• Ozceyhan, V., S. Gunes, O. Buyukalaca, and N. Altuntop. 2008October1.Heat transfer enhancement in a tube using circular cross sectional rings separated from wall. Applied Energy 8510: 988–1001.doi: 10.1016/j.apenergy.2008.02.007
   Web of Science ®Google Scholar
• Pethkool, S., S. Eiamsa-Ard, S. Kwankaomeng, and P. Promvonge. March 1, 2011. Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube. International Communications in Heat and Mass Transfer 38 (3):340–47.
   Web of Science ®Google Scholar
• Rainieri, S., F. Bozzoli, L. Cattani, and G. Pagliarini. 2013. Compound convective heat transfer enhancement in helically coiled wall corrugated tubes. International Journal of Heat and Mass Transfer 59:353–62. doi:10.1016/j.ijheatmasstransfer.2012.12.037.
   Web of Science ®Google Scholar
• Rainieri, S., F. Bozzoli, and G. Pagliarini. 2012January15.Experimental investigation on the convective heat transfer in straight and coiled corrugated tubes for highly viscous fluids: Preliminary results. International Journal of Heat and Mass Transfer 551–3: 498–504.doi: 10.1016/j.ijheatmasstransfer.2011.08.030
   Web of Science ®Google Scholar
• Ramalingam, S., R. Dhairiyasamy, and M. Govindasamy October 2019. Consequence of nanoparticle physiognomies on heat transfer characteristics of heat exchanger. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 4:1–5. doi: 10.1080/15567036.2019.1670759.
   Google Scholar
• Rostami, S., N. Ahmadi, and S. Khorasani. November 2019. Experimental investigations of thermo-exergitic behavior of a four-start helically corrugated heat exchanger with air/water two-phase flow. International Journal of Thermal Sciences 145(145):106030. doi: 10.1016/j.ijthermalsci.2019.106030.
   Google Scholar
• Stel, H., R. E. Morales, A. T. Franco, S. L. Junqueira, R. H. Erthal, and M. A. Gonçalves. July 1, 2010. Numerical and experimental analysis of turbulent flow in corrugated pipes. Journal of Fluids Engineering 132 (7):071203.
   Web of Science ®Google Scholar
• Sun, M., and M. Zeng. January 2018. Investigation on turbulent flow and heat transfer characteristics and technical economy of corrugated tube. Applied Thermal Engineering 25(129):1–1.
   Google Scholar
• Tang, X., X. Dai, and D. Zhu. November 2015. Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube. International Journal of Heat and Mass Transfer 1(90):523–41.
   Google Scholar
• Wang, G., D. Wang, X. Peng, L. Han, S. Xiang, and F. Ma. February 2019. Experimental and numerical study on heat transfer and flow characteristics in the shell side of helically coiled trilobal tube heat exchanger. Applied Thermal Engineering 149(149):772–87. doi: 10.1016/j.applthermaleng.2018.11.055.
   Google Scholar
• Wang, W., Y. Zhang, B. Li, and Y. Li. 2018a 1. Numerical investigation of tube-side fully developed turbulent flow and heat transfer in outward corrugated tubes. International Journal of Heat and Mass Transfer. Jan(116):115–26.
   Google Scholar
• Wang, W., Y. Zhang, Y. Li, H. Han, and B. Li. May 2018b. Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization. International Journal of Heat and Mass Transfer 120(120):782–92. doi: 10.1016/j.ijheatmasstransfer.2017.12.079.
   Google Scholar
• Zachar, A. 2010September1.Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall. International Journal of Heat and Mass Transfer 5319–20: 3928–39.doi: 10.1016/j.ijheatmasstransfer.2010.05.011
   Web of Science ®Google Scholar
• Zhang, F., G. Liao, and B. Sundén. August 2020. Numerical investigations on the effect of convex-dimple streamwise arrangements on the flow and heat transfer characteristics of rectangular convex-dimple-grooved channels. Numerical Heat Transfer, Part A: Applications 7:1–8.
   Google Scholar
• Zhang, L., and D. Che. February 11, 2011. Influence of corrugation profile on the thermal hydraulic performance of cross-corrugated plates. Numerical Heat Transfer, Part A: Applications 59 (4):267–96.
   Web of Science ®Google Scholar
• Zheng, N., P. Liu, F. Shan, Z. Liu, and W. Liu April 2016. Numerical investigations of the thermal-hydraulic performance in a rib-grooved heat exchanger tube based on entropy generation analysis. Applied Thermal Engineering 99:1071–85. doi: 10.1016/j.applthermaleng.2016.02.008.
   Web of Science ®Google Scholar