References
- Ahmad, M., M. Schatz, and M. V. Casey. 2018. An empirical approach to predict droplet impact erosion in low-pressure stages of steam turbines. Wear 402-403:57–63. doi:https://doi.org/10.1016/j.wear.2018.02.004.
- Balestrin, E., R. K. Decker, D. Noriler, J. C. S. C. Bastos, and H. F. Meier. 2017. An alternative for the collection of small particles in cyclones: Experimental analysis and CFD modeling. Separation and Purification Technology 184:54–65. doi:https://doi.org/10.1016/j.seppur.2017.04.023.
- Deng, Y., L. Zhang, H. Hou, B. Yu, and D. Sun. 2019. Modeling and simulation of the gas-liquid separation process in an axial flow cyclone based on the Eulerian-Lagrangian approach and surface film model. Powder Technology 353:473–88. doi:https://doi.org/10.1016/j.powtec.2019.05.039.
- Haeri, S., and J. S. Shrimpton. 2011. A mesoscopic description of polydispersed particle laden turbulent flows. Progress in Energy and Combustion Science 37 (6):716–40. doi:https://doi.org/10.1016/j.pecs.2011.03.002.
- Huang, L., S. Deng, Z. Chen, J. Guan, and M. Chen. 2018. Numerical analysis of a novel gas-liquid pre-separation cyclone. Separation and Purification Technology 194:470–79. doi:https://doi.org/10.1016/j.seppur.2017.11.066.
- Ishikawa, Y., R. Fujihara, S. Kubo, and C. Iwaki. 2017. Study on microdroplet diameter enlargement for enhancement of moisture separation efficiency. Mechanical Engineering Journal 4 (6):17–00287. doi:https://doi.org/10.1299/mej.17-00287.
- Katono, K., N. Ishida, T. Sumikawa, and K. Yasuda. 2014. Air–water downscaled experiments and three-dimensional two-phase flow simulations of improved steam separator for boiling water reactor. Nuclear Engineering and Design 278:465–71. doi:https://doi.org/10.1016/j.nucengdes.2014.08.006.
- Kouhikamali, R., S. M. A. Noori Rahim Abadi, and M. Hassani. 2014. Numerical study of performance of wire mesh mist eliminator. Applied Thermal Engineering 67 (1–2):214–22. doi:https://doi.org/10.1016/j.applthermaleng.2014.02.073.
- Li, J., T. Wang, L. Zhang, J. Chang, Z. Song, and C. Ma. 2020. Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics. Atmospheric Pollution Research 11 (9):1487–99. doi:https://doi.org/10.1016/j.apr.2020.06.002.
- Li, Y., G. Qin, Z. Xiong, and L. Fan. 2022. Gas-liquid separation performance of a micro axial flow cyclone separator. Chemical Engineering Science 249:117234. doi:https://doi.org/10.1016/j.ces.2021.117234.
- Liu, Y., Q. Cheng, B. Zhang, and F. Tian. 2015. Three-phase hydrocyclone separator – A review. Chemical Engineering Research & Design 100:554–60. doi:https://doi.org/10.1016/j.cherd.2015.04.026.
- Man, X. 2011. Experimental research of the new type axial flow cyclone. Master Thesis, China University of Petroleum (East China), Qingdao.
- Mao, Y., W. Pu, H. Zhang, Q. Zhang, Z. Song, K. Chen, and D. Han. 2019. Orthogonal experimental design of an axial flow cyclone separator. Chemical Engineering and Processing - Process Intensification 144:107645. doi:https://doi.org/10.1016/j.cep.2019.107645.
- Misiulia, D., A. G. Andersson, and T. S. Lundström. 2015. Computational investigation of an industrial cyclone separator with helical-roof inlet. Chemical Engineering & Technology 38 (8):1425–34. doi:https://doi.org/10.1002/ceat.201500181.
- Niu, L.-B., K. Okano, S. Izumi, K. Shiokawa, M. Yamashita, and Y. Sakai. 2018. Effect of chloride and sulfate ions on crevice corrosion behavior of low-pressure steam turbine materials. Corrosion Science 132:284–92. doi:https://doi.org/10.1016/j.corsci.2017.12.017.
- Peréz Guerra, L. D., J. Trujillo, and W. Blanco. 2014. Geometric design optimization of a prototype axial gas-liquid cyclonic separator. In Computational and experimental fluid mechanics with applications to physics, engineering and the environment, Sigalotti, Leonardo Di G., Klapp, Jaime, and Sira, Eloy, 409–22. Cham: Springer. doi:https://doi.org/10.1007/978-3-319-00191-3_27.
- Safikhani, H., and P. Mehrabian. 2016. Numerical study of flow field in new cyclone separators. Advanced Powder Technology 27 (2):379–87. doi:https://doi.org/10.1016/j.apt.2016.01.011.
- Saghafifar, M., A. Omar, K. Mohammadi, A. Alashkar, and M. Gadalla. 2019. A review of unconventional bottoming cycles for waste heat recovery: Part I – Analysis, design, and optimization. Energy Conversion and Management 198:110905. doi:https://doi.org/10.1016/j.enconman.2018.10.047.
- Sakin, A., I. Karagoz, and A. Avci. 2019. Performance analysis of axial and reverse flow cyclone separators. Chemical Engineering and Processing - Process Intensification 144:107630. doi:https://doi.org/10.1016/j.cep.2019.107630.
- Tang, Y., Z. Qiao, Y. Cao, F. Si, C. E. Romero, and C. Rubio-Maya. 2020. Numerical analysis of separation performance of an axial-flow cyclone for supercritical CO2-water separation in CO2 plume geothermal systems. Separation and Purification Technology 248:116999. doi:https://doi.org/10.1016/j.seppur.2020.116999.
- Tian, Z., and L. Yang. 2017. Numerical investigation on a new type of two-stage steam separator in pressurized water reactors. Energy Procedia 142:3962–67. doi:https://doi.org/10.1016/j.egypro.2017.12.304.
- Wang, B., B. Chen, and R. Tian. 2019. Review of research progress on flow and rupture characteristics of liquid film on corrugated plate wall. Annals of Nuclear Energy 132:741–51. doi:https://doi.org/10.1016/j.anucene.2019.06.060.
- Wang, B., and R. Tian. 2019. Investigation on flow and breakdown characteristics of water film on vertical corrugated plate wall. Annals of Nuclear Energy 127:120–29. doi:https://doi.org/10.1016/j.anucene.2018.12.001.
- Wang, D., X. Dai, Z. Wu, W. Zhao, P. Wang, B. Hu, and L. Shi. 2020. Design and testing of a 340 kW organic rankine cycle system for low pressure saturated steam heat source. Energy 210:118380. doi:https://doi.org/10.1016/j.energy.2020.118380.
- Wasilewski, M., L. Singh Brar, and G. Ligus. 2021. Effect of the central rod dimensions on the performance of cyclone separators - optimization study. Separation and Purification Technology 274:119020. doi:https://doi.org/10.1016/j.seppur.2021.119020.
- Wei, Y., Y. Li, J. Lai, Q. Zhao, L. Yang, Q. Lin, … Z. Lin. 2020. Analysis on corrosion fatigue cracking mechanism of 17-4PH blade of low pressure rotor of steam turbine. Engineering Failure Analysis 118. doi:https://doi.org/10.1016/j.engfailanal.2020.104925.
- Xiong, Z., M. Lu, M. Wang, H. Gu, and X. Cheng. 2014. Study on flow pattern and separation performance of air–water swirl-vane separator. Annals of Nuclear Energy 63:138–45. doi:https://doi.org/10.1016/j.anucene.2013.07.026.
- Yuan, X. M., H. J. Zhao, and J. Y. Qu. 2013. Numerical simulation of double inlet cylinder cyclone using CFD. Applied Mechanics and Materials 275-277:558–61.
- Yuan, Y., Z. Zhao, L. Tan, Y. Xu, and Y. Yuan. 2020. Structural improvement of the cyclone separator for separating the biogas impurity particles. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–14. doi:https://doi.org/10.1080/15567036.2020.1815905.
- Zhang, H., and Q. Liu. 2020. Numerical investigation on performance of moisture separator: Experimental validation, applications and new findings. Annals of Nuclear Energy 142:107362. doi:https://doi.org/10.1016/j.anucene.2020.107362.
- Zhang, H., Q. Liu, B. Qin, H. Bo, and F. Chen. 2016. Study on working mechanism of AP1000 moisture separator by numerical modeling. Annals of Nuclear Energy 92:345–54. doi:https://doi.org/10.1016/j.anucene.2016.01.013.