References
- Alam, T., and M. H. Kim. 2017. A critical review on artificial roughness provided in rectangular solar air heater duct. Renewable and Sustainable Energy Reviews 69 (October 2016):387–400. doi:https://doi.org/10.1016/j.applthermaleng.2016.01.107.
- Alam, T., R. P. Saini, and J. S. Saini. 2014a. Experimental investigation on heat transfer enhancement due to V-shaped perforated blocks in a rectangular duct of solar air heater. Energy Conversion and Management 81:374–83. doi:https://doi.org/10.1016/j.enconman.2014.02.044.
- Alam, T., R. P. Saini, and J. S. Saini. 2014b. Experimental investigation of thermohydraulic performance of a rectangular solar air heater duct equipped with V-shaped perforated blocks. Adv. Mech. Eng 2014. doi:https://doi.org/10.1155/2014/948313.
- Asgharian, H., and E. Baniasadi. 2019. A review on modeling and simulation of solar energy storage systems based on phase change materials. Journal of Energy Storage 21 (July 2018):186–201. doi:https://doi.org/10.1016/j.est.2018.11.025.
- Chamoli, S., and N. S. Thakur. 2013a. Heat transfer enhancement in solar air heater with V-shaped perforated baffles. Journal of Renewable and Sustainable Energy 5 (2):023122. doi:https://doi.org/10.1063/1.4798411.
- Chamoli, S., and N. S. Thakur. 2013b. Correlations for solar air heater duct with V-shaped perforated baffles as roughness elements on absorber plate. Int. J. Sustain. Energy (May 2015):37–41. doi:https://doi.org/10.1080/14786451.2013.857318.
- Chhaparwal, G. K., A. Srivastava, and R. Dayal. 2019. Artificial repeated-rib roughness in a solar air heater – A review. Solar Energy 194 (August):329–59. doi:https://doi.org/10.1016/j.solener.2019.10.011.
- Deo, N. S., S. Chander, and J. S. Saini. 2016. Performance analysis of solar air heater duct roughened with multigap V-down ribs combined with staggered ribs. Renewable Energy 91:484–500. doi:https://doi.org/10.1063/1.4798411.
- Gupta, D., S. C. Solanki, and J. S. Saini. 1993. Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates. Solar Energy 51 (1):31–37. doi:https://doi.org/10.1016/0038-092X(93)90039-Q.
- Hans, V. S., R. P. Saini, and J. S. Saini. 2010. Heat transfer and friction factor correlations for a solar air heater duct roughened artificially with multiple v-ribs. Solar Energy 84 (6):898–911. doi:https://doi.org/10.1016/j.solener.2010.02.004.
- Incropera, A. S. L. F. P., D. P. Dewitt, and T. L. Bergman. 2007. Fundamentals of heat and mass transfer. John Wiley & Sons 6:514–18.
- Jain, P. K., and A. Lanjewar. 2019. Overview of V-RIB geometries in solar air heater and performance evaluation of a new V-RIB geometry. Renewable Energy 133:77–90. doi:https://doi.org/10.1016/j.renene.2018.10.001.
- Jain, S. K., R. Misra, A. Kumar, and G. D. Agrawal. 2019. Thermal performance investigation of a solar air heater having discrete V-shaped perforated baffles. International Journal of Ambient Energy 1–9. doi:https://doi.org/10.1080/01430750.2019.1636874.
- Jin, D., et al. 2017. Thermohydraulic performance of solar air heater with staggered multiple V-shaped ribs on the absorber plate. Energy 127 ():387–400. doi:https://doi.org/10.1016/j.energy.2017.03.101.
- Karwa, R., and B. K. Maheshwari. 2009. Heat transfer and friction in an asymmetrically heated rectangular duct with half and fully perforated baffles at different pitches. International Communications in Heat and Mass Transfer 36 (3):264–68. doi:https://doi.org/10.1016/j.icheatmasstransfer.2008.11.005.
- Kumar, A., and A. Layek. 2020. Nusselt number and friction characteristics of a solar air heater that has a winglet type vortex generator in the absorber surface. Experimental Thermal and Fluid Science 119:110204. doi:https://doi.org/10.1016/j.expthermflusci.2020.110204.
- Kumar, A., R. P. Saini, and J. S. Saini. 2013. Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having multi v-shaped with gap rib as artificial roughness. Renewable Energy 58:151–63. doi:https://doi.org/10.1016/j.renene.2013.03.013.
- Kumar, B., M. Kumar, A. K. Patil, and S. Jain. 2018a. Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow : An experimental study. Exp. Heat Transf 1 (1):1–21. doi:https://doi.org/10.1080/08916152.2018.1545808.
- Kumar, R., A. Kumar, R. Chauhan, and R. Maithani. 2018b. Comparative study of effect of various blockage arrangements on thermal hydraulic performance in a roughened air passage. Renewable and Sustainable Energy Reviews 81 (5):701–19. doi:https://doi.org/10.1007/s00348-004-0861-8.
- Kwak, J. S, Shin, Somin. April 2015. Effect of hole shape on the heat transfer in a rectangular duct with perforated blockage walls Journal of Mechanical Science and Technology 22 1945–1951 . doi:https://doi.org/10.1007/s12206-008-0736-7.
- Lanjewar, A. M., J. L. Bhagoria, and R. M. Sarviya. 2011. Performance analysis of W-shaped rib roughened solar air heater. Journal of Renewable and Sustainable Energy 3 (4):043110. doi:https://doi.org/10.1063/1.3595740.
- Liu, J., S. Hussain, W. Wang, L. Wang, G. Xie, and B. Sundén. 2019. Heat transfer enhancement and turbulent flow in a rectangular channel using perforated ribs with inclined holes. Journal of Heat Transfer 141 (4). doi: https://doi.org/10.1115/1.4042841.
- McClintock, S. J. K. 2014. The purposes of uncertainty analysis. J. Fluids Eng 107:153–60.
- Nuntadusit, C., M. Wae-hayee, A. Bunyajitradulya, and S. Eiamsa-ard. 2012. Thermal visualization on surface with transverse perforated ribs. International Communications in Heat and Mass Transfer 39 (5):110204–639. doi:https://doi.org/10.1016/j.expthermflusci.2020.110204.
- Ong, K. S. 1995. Thermal performance of solar air heaters: Mathematical model and solution procedure. Solar Energy 55 (2):93–109. doi:https://doi.org/10.1016/0038-092X(95)00021-I.
- Patil, A. K., J. S. Saini, and K. Kumar. 2012. Nusselt number and friction factor correlations for solar air heater duct with broken V-down ribs combined with staggered rib roughness. J. Renew. Sustain. Energy 4 (3). doi: https://doi.org/10.1063/1.4732133.
- Prasad, B. N., and J. S. Saini. 1988. Effect of artificial roughness on heat transfer and friction factor in a solar air heater. Solar Energy 41 (6):555–60. doi:https://doi.org/10.1016/0038-092X(88)90058-8.
- Promvonge, P., C. Khanoknaiyakarn, S. Kwankaomeng, and C. Thianpong. 2011. Thermal behavior in solar air heater channel fitted with combined rib and delta-winglet. International Communications in Heat and Mass Transfer 38 (6):329–59. doi:https://doi.org/10.1016/j.solener.2019.10.011.
- Saini, S. K., and R. P. Saini. 2008. Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness. Solar Energy 82 (12):1118–30. doi:https://doi.org/10.1016/j.solener.2008.05.010.
- Sara, O. N., T. Pekdemir, S. Yapici, and M. Yilmaz. 2001. Heat-transfer enhancement in a channel flow with perforated rectangular blocks. International Journal of Heat and Fluid Flow 22 (5):611–20. doi:https://doi.org/10.1016/j.applthermaleng.2016.01.107.
- Sharma, S. K., and V. R. Kalamkar. 2015. Thermo-hydraulic performance analysis of solar air heaters having artificial roughness – A review. Renewable and Sustainable Energy Reviews 41:413–35. doi:https://doi.org/10.1016/j.rser.2014.08.051.
- Singh, V. P., S. Jain, and J. Gupta. 2021 October. Analysis of the effect of perforation in multi-v rib artificial roughened single pass solar air heater: - Part A. Exp. Heat Transf 1–20. doi:https://doi.org/10.1080/08916152.2021.1988761.
- Skullong, S., P. Promthaisong, P. Promvonge, C. Thianpong, and M. Pimsarn. 2018. Thermal performance in solar air heater with perforated-winglet-type vortex generator. Solar Energy 170:1101–17. doi:https://doi.org/10.1016/j.solener.2018.05.093.
- Skullong, S., P. Promvonge, C. Thianpong, and M. Pimsarn. 2016. Thermal performance in solar air heater channel with combined wavy-groove and perforated-delta wing vortex generators. Applied Thermal Engineering 100:110315–620. doi:https://doi.org/10.1016/j.rser.2020.110315.
- Tamna, S., S. Skullong, C. Thianpong, and P. Promvonge. 2014. Heat transfer behaviors in a solar air heater channel with multiple V-baffle vortex generators. Solar Energy 110:720–35. doi:https://doi.org/10.1016/j.solener.2014.10.020.
- Tariq, A., P. K. Panigrahi, and K. Muralidhar. 2004. Flow and heat transfer in the wake of a surface-mounted rib with a slit. Experiments in Fluids 37 (5):701–19. doi:https://doi.org/10.1007/s00348-004-0861-8.
- Vengadesan, E., and R. Senthil. 2020. A review on recent developments in thermal performance enhancement methods of flat plate solar air collector. Renewable and Sustainable Energy Reviews 134 (September):110315. doi:https://doi.org/10.1016/j.rser.2020.110315.
- Vogiatzis, I. I., A. C. Denizopoulou, G. K. Ntinas, and V. P. Fragos. 2014. Simulation analysis of air flow and turbulence statistics in a rib grit roughened duct. The Scientific World Journal 2014:1–10. doi:https://doi.org/10.1155/2014/791513.
- Webb, E. R. G. E. R. L. 1972. Application of rough surfaces to heat exchanger. International Journal of Heat and Mass Transfer 15 (9):110204–1658. doi:https://doi.org/10.1016/0017-9310(72)90095-6.
- Yildiz, I., and T. Hill. 2018. 1.15 Solar Energy. Compr. Energy Syst 1:638–64. doi:https://doi.org/10.1016/B978-0-12-809597-3.00117-6.