References
- Abdelrazek, A. H., S. N. Kazi, O. A. Alawi, N. Yusoff, C. S. Oon, and H. M. Ali. 2019. Heat transfer and pressure drop investigation through pipe with different shapes using different types of nanofluids. Journal of Thermal Analysis and Calorimetry 139 (3):1637–1653. doi:https://doi.org/10.1007/s10973-019-08562-5.
- Aghaei, A., G. A. Sheikhzadeh, M. Goodarzi, H. Hasani, H. Damirchi, and M. Afrand. 2018. Effect of horizontal and vertical elliptic baffles inside an enclosure on the mixed convection of a MWCNTs-water nanofluid and its entropy generation. The European Physical Journal Plus 133 (11). doi: https://doi.org/10.1140/epjp/i2018-12278-4.
- Ahmadi, A. A., E. Khodabandeh, H. Moghadasi, N. Malekian, O. A. Akbari, and M. Bahiraei. 2017. Numerical study of flow and heat transfer of water-Al2O3 nanofluid inside a channel with an inner cylinder using Eulerian–Lagrangian approach. Journal of Thermal Analysis and Calorimetry 132 (1):651–665. doi:https://doi.org/10.1007/s10973-017-6798-y.
- Ahmed, H. E., M. I. Ahmed, M. Z. Yusoff, M. N. A. Hawlader, and H. Al-Ani. 2015. Experimental study of heat transfer augmentation in non-circular duct using combined nanofluids and vortex generator. International Journal of Heat and Mass Transfer 90:1197–1206. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2015.07.065.
- Ahmed, H. E., H. A. Mohammed, and M. Z. Yusoff. 2012. Heat transfer enhancement of laminar nanofluids flow in a triangular duct using vortex generator. Superlattices and Microstructures 52 (3):398–415. doi:https://doi.org/10.1016/j.spmi.2012.05.023.
- Ahmed, H. E., B. H. Salman, and A. S. Kerbeet. 2019. Heat transfer enhancement of turbulent forced nanofluid flow in a duct using triangular rib. International Journal of Heat and Mass Transfer 134:30–40. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.163.
- Ajeel, R. K., K. Sopian, and R. Zulkifli. 2021. Thermal-hydraulic performance and design parameters in a curved-corrugated channel with L-shaped baffles and nanofluid. Journal of Energy Storage 34:101996. doi:https://doi.org/10.1016/j.est.2020.101996.
- El Maakoul, A., M. El Metoui, A. Ben Abdellah, S. Saadeddine, and M. Meziane. 2017. Numerical investigation of thermohydraulic performance of air to water double-pipe heat exchanger with helical fins. Applied Thermal Engineering 127:127–139. doi:https://doi.org/10.1016/j.applthermaleng.2017.08.024.
- Erdem, M., and Y. Varol. 2020. Numerical investigation of heat transfer and flow characteristics of MHD nano-fluid forced convection in a pipe. Journal of Thermal Analysis and Calorimetry 139 (6):3897–3909. doi:https://doi.org/10.1007/s10973-020-09366-8.
- Faridi Khouzestani, R., and A. Ghafouri. 2020. Numerical study on heat transfer and nanofluid flow in pipes fitted with different dimpled spiral center plate. SN Applied Sciences 2 (2):https://doi.org/10.1007/s42452-020-2084-x. doi:https://doi.org/10.1007/s42452-020-2084-x.
- Fsadni, A. M., J. P. M. Whitty, M. A. Stables, and A. A. Adeniyi. 2017. Numerical study on turbulent heat transfer and pressure drop characteristics of a helically coiled hybrid rectangular-circular tube heat exchanger with Al2O3-water nanofluids. Applied Thermal Engineering 114:466–483. doi:https://doi.org/10.1016/j.applthermaleng.2016.11.181.
- Gnanavel, C., R. Saravanan, and M. Chandrasekaran. 2020. Heat transfer enhancement through nano-fluids and twisted tape insert with rectangular cut on its rib in a double pipe heat exchanger. Materials Today: Proceedings, Tiruchirappalli, India. 21, 865–869. doi:https://doi.org/10.1016/j.matpr.2019.07.606
- Mahmoudi, M., M. R. Tavakoli, M. A. Mirsoleimani, A. Gholami, and M. R. Salimpour. 2017. Experimental and numerical investigation on forced convection heat transfer and pressure drop in helically coiled pipes using TiO2 /water nanofluid. International Journal of Refrigeration 74:627–643. doi:https://doi.org/10.1016/j.ijrefrig.2016.11.014.
- Majid Etghani, M., and S. Amir Hosseini Baboli. 2017. Numerical investigation and optimization of heat transfer and exergy loss in shell and helical tube heat exchanger. Applied Thermal Engineering 121:294–301. doi:https://doi.org/10.1016/j.applthermaleng.2017.04.074.
- Moravej, M., M. H. Doranehgard, A. Razeghizadeh, F. Namdarnia, N. Karimi, L. K. B. Li, H. Mozafari, and Z. Ebrahimi. 2021. Experimental study of a hemispherical three-dimensional solar collector operating with silver-water nanofluid. Sustainable Energy Technologies and Assessments 44:101043. doi:https://doi.org/10.1016/j.seta.2021.101043.
- Nakhchi, M. E., and J. A. Esfahani. 2018. Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape. Powder Technology 339:985–994. doi:https://doi.org/10.1016/j.powtec.2018.08.087.
- Nassan, T. H., S. Z. Heris, and S. H. Noie. 2010. A comparison of experimental heat transfer characteristics for Al2O3/water and CuO/water nanofluids in square cross-section duct. International Communications in Heat and Mass Transfer 37 (7):924–928. doi:https://doi.org/10.1016/j.icheatmasstransfer.2010.04.009.
- Patankar, S. V. 2018. Numerical heat transfer and fluid flow. CRC Press.
- Pavan Kumar, E., A. Kumar Solanki, and M. Mohan Jagadeesh Kumar. 2021. Numerical investigation of heat transfer and pressure drop characteristics in the micro-fin helically coiled tubes. Applied Thermal Engineering 182:116093. doi:https://doi.org/10.1016/j.applthermaleng.2020.116093.
- Pourfattah, F., M. Motamedian, G. Sheikhzadeh, D. Toghraie, and O. Ali Akbari. 2017. The numerical investigation of angle of attack of inclined rectangular rib on the turbulent heat transfer of Water-Al2O3 nanofluid in a tube. International Journal of Mechanical Sciences 131:1106–1116. doi:https://doi.org/10.1016/j.ijmecsci.2017.07.049.
- Rasheed, A. H., H. B. Alias, and S. D. Salman. 2021. Experimental and numerical investigations of heat transfer enhancement in shell and helically microtube heat exchanger using nanofluids. International Journal of Thermal Sciences 159:106547. doi:https://doi.org/10.1016/j.ijthermalsci.2020.106547.
- Rashidi, S., M. Akbarzadeh, N. Karimi, and R. Masoodi. 2018. Combined effects of nanofluid and transverse twisted-baffles on the flow structures, heat transfer and irreversibilities inside a square duct – A numerical study. Applied Thermal Engineering 130:135–148. doi:https://doi.org/10.1016/j.applthermaleng.2017.11.048.
- Shahsavar, A., A. Godini, P. T. Sardari, D. Toghraie, and H. Salehipour. 2019. Impact of variable fluid properties on forced convection of Fe3O4/CNT/water hybrid nanofluid in a double-pipe mini-channel heat exchanger. Journal of Thermal Analysis and Calorimetry 137 (3):1031–1043. doi:https://doi.org/10.1007/s10973-018-07997-6.
- Sharma, S., A. Kumar, and R. Maithani. 2021. Influence of twisted tape with collective protruded rib parameters of thermal–hydraulic performance of Al2O3-H2O nanofluid flow in heat exchanger tube. Materials Today: Proceedings, Phagwara, Punjab, India. doi: https://doi.org/10.1016/j.matpr.2021.08.021
- Sheikholeslami, M., and D. D. Ganji. 2016a. Heat transfer improvement in a double pipe heat exchanger by means of perforated turbulators. Energy Conversion and Management 127:112–123. doi:https://doi.org/10.1016/j.enconman.2016.08.090.
- Sheikholeslami, M., and D. D. Ganji. 2016b. Heat transfer enhancement in an air to water heat exchanger with discontinuous helical turbulators; experimental and numerical studies. Energy 116:341–352. doi:https://doi.org/10.1016/j.energy.2016.09.120.
- Sheikholeslami, M., M. Gorji-Bandpy, and D. D. Ganji. 2015. Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices. Renewable and Sustainable Energy Reviews 49:444–469. doi:https://doi.org/10.1016/j.rser.2015.04.113.
- Sheikholeslami, M., M. Jafaryar, Z. Said, A. I. Alsabery, H. Babazadeh, and A. Shafee. 2021. Modification for helical turbulator to augment heat transfer behavior of nanomaterial via numerical approach. Applied Thermal Engineering 182:115935. doi:https://doi.org/10.1016/j.applthermaleng.2020.115935.
- Togun, H., H. I. Abu-Mulaweh, S. N. Kazi, and A. Badarudin. 2016. Numerical simulation of heat transfer and separation Al2O3 /nanofluid flow in concentric annular pipe. International Communications in Heat and Mass Transfer 71:108–117. doi:https://doi.org/10.1016/j.icheatmasstransfer.2015.12.014.
- Webb, R. L., and N. Kim. 2005. Enhanced heat transfer. Taylor and Francis, NY: CRC Press.
- Xuan, Y., and Q. Li. 2000. Heat transfer enhancement of nanofluids. International Journal of Heat and Fluid Flow 21 (1):58–64. doi:https://doi.org/10.1016/S0142-727X(99)00067-3.
- Zeinali Heris, S., T. H. Nassan, S. H. Noie, H. Sardarabadi, and M. Sardarabadi. 2013. Laminar convective heat transfer of Al2O3/water nanofluid through square cross-sectional duct. International Journal of Heat and Fluid Flow 44:375–382. doi:https://doi.org/10.1016/j.ijheatfluidflow.2013.07.006.
- Zhang, X., B. Liu, J. Liu, X. Wang, and H. Zhang. 2020. Experimental and numerical analysis of heat transfer and flow characteristics in parabolic ducts. International Journal of Heat and Mass Transfer 147:118912. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118912.
- Zhang, C., D. Wang, S. Xiang, Y. Han, and X. Peng. 2017. Numerical investigation of heat transfer and pressure drop in helically coiled tube with spherical corrugation. International Journal of Heat and Mass Transfer 113:332–341. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.108.
- Zheng, L., Y. Xie, and D. Zhang. 2017. Numerical investigation on heat transfer performance and flow characteristics in circular tubes with dimpled twisted tapes using Al2O3 -water nanofluid. International Journal of Heat and Mass Transfer 111:962–981. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.062.