References
- Al-Degs, Y. S., M. I. El-Barghouthi, A. H. El-Sheikh, and G. M. Walker. 2008. Effect of solution pH, ionic strength, and temperature on adsorption behavior of reactive dyes on activated carbon. Dyes and Pigments 77 (1):16–23. doi:https://doi.org/10.1016/j.dyepig.2007.03.001.
- Atinafu, D. G., Yun, B.Y., Yang, S, Yuk, H, Wi, S, Kim, S . 2021. Structurally advanced hybrid support composite phase change materials: Architectural synergy. Energy Storage Materials 42:164–84. doi:https://doi.org/10.1016/j.ensm.2021.07.022.
- Augustyn, V., P. Simon, and B. Dunn. 2014. Pseudocapacitive oxide materials for high-rate electrochemical energy storage. Energy & Environmental Science 7 (5):1597–614. doi:https://doi.org/10.1039/c3ee44164d.
- Balandin, A. A. 2011. Thermal properties of graphene and nanostructured carbon materials. Nature Materials 10 (8):569. doi:https://doi.org/10.1038/nmat3064.
- Bayramoglu, E. Ç. 2011. Thermal properties and stability of n‐octadecane based composites containing multiwalled carbon nanotubes. Polymer Composites 32 (6):904–09. doi:https://doi.org/10.1002/pc.21109.
- Berger, C., Z. Song, X. Li, X. Wu, N. Brown, C. Naud, and E. H. Conrad. 2006. Electronic confinement and coherence in patterned epitaxial graphene. Science 312 (5777):1191–96. doi:https://doi.org/10.1126/science.1125925.
- Bi, H., F. Huang, J. Liang, Y. Tang, X. Lü, X. Xie, Jiang M, et al. 2011. Large-scale preparation of highly conductive three-dimensional graphene and its applications in CdTe solar cells. Journal of Materials Chemistry 21 (43):17366–70. doi:https://doi.org/10.1039/c1jm13418c.
- Bi, H., H. Huang, F. Xu, T. Lin, H. Zhang, and F. Huang. 2015. Carbon microtube/graphene hybrid structures for thermal management applications. Journal of Materials Chemistry A 3 (36):18706–10. doi:https://doi.org/10.1039/C5TA05115K.
- Cao, Y., Pourhedayat S, Dizaji H.S., Wae-hayee M, et al. 2021. A comprehensive optimization of phase change material in hybrid application with solar chimney and photovoltaic panel for simultaneous power production and air ventilation. Building and Environment 197:107833. doi:https://doi.org/10.1016/j.buildenv.2021.107833.
- Cao, H., Qi, F, Liu, R, Wang, F, Zhang, C, Zhang, X, Chai, Y, Zhai, L. 2017. The influence of hydrogen bonding on N-methyldiethanolamine-extended polyurethane solid–solid phase change materials for energy storage. RSC Advances 7 (19):11244–52. doi:https://doi.org/10.1039/C7RA00405B.
- Cascone, Y., A. Capozzoli, and M. Perino. 2018. Optimisation analysis of PCM-enhanced opaque building envelope components for the energy retrofitting of office buildings in Mediterranean climates. Applied Energy 211:929–53. doi:https://doi.org/10.1016/j.apenergy.2017.11.081.
- Chen, X., Cheng, P, Tang, Z, Xu, X, Gao, H, Wang, G. 2021. Carbon‐based composite phase change materials for thermal energy storage, transfer, and conversion. Advanced Science 8 (9):2001274. doi:https://doi.org/10.1002/advs.202001274.
- Chen, P. H., and D. D. L. Chung. 2013. Viscoelastic behavior of the cell wall of exfoliated graphite. Carbon 61:305–12. doi:https://doi.org/10.1016/j.carbon.2013.05.009.
- Chen, X., Gao, H, Hai, G, Jia, D, Xing, L, Chen, S, Cheng, P, Han, M, Dong, W, Wang, G. 2020. Carbon nanotube bundles assembled flexible hierarchical framework based phase change material composites for thermal energy harvesting and thermotherapy. Energy Storage Materials 26:129–37. doi:https://doi.org/10.1016/j.ensm.2019.12.029.
- Chen, Z., W. Ren, L. Gao, B. Liu, S. Pei, and H. M. Cheng. 2011. Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition. Nature Materials 10 (6):424. doi:https://doi.org/10.1038/nmat3001.
- Chen, L., R. Zou, W. Xia, Z. Liu, Y. Shang, J. Zhu, Wang Y, Lin J, Xia D, Cao A, et al. 2012. Electro-and photodriven phase change composites based on wax-infiltrated carbon nanotube sponges. ACS nano 6 (12):10884–92. doi:https://doi.org/10.1021/nn304310n.
- Ding, X., G. Ding, X. Xie, F. Huang, and M. Jiang. 2011. Direct growth of few layer graphene on hexagonal boron nitride by chemical vapor deposition. Carbon 49 (7):2522–25. doi:https://doi.org/10.1016/j.carbon.2011.02.022.
- Djamai,Z.I., Salvatore F, Larbi A.S., Cai G., El Mankibi M. 2019. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars. Cement and Concrete Research 119:51–63. doi:https://doi.org/10.1016/j.cemconres.2019.02.002.
- Du,X., Qiu, J, Deng, S, Du, Z, Cheng, X, Wang, H. 2020. Alkylated nanofibrillated cellulose/carbon nanotubes aerogels supported form-stable phase change composites with improved n-alkanes loading capacity and thermal conductivity. ACS Applied Materials & Interfaces 12(5):5695–703. doi:https://doi.org/10.1021/acsami.9b17771.
- Farid, M. M., A. M. Khudhair, S. A. K. Razack, and S. Al-Hallaj. 2004. A review on phase change energy storage: Materials and applications. Energy Conversion and Management 45 (9–10):1597–615. doi:https://doi.org/10.1016/j.enconman.2003.09.015.
- Fellinger, T. P., R. J. White, M. M. Titirici, and M. Antonietti. 2012. Borax‐Mediated formation of carbon aerogels from glucose. Advanced Functional Materials 22 (15):3254–60. doi:https://doi.org/10.1002/adfm.201102920.
- Figueiredo, A., R. Vicente, J. Lapa, C. Cardoso, F. Rodrigues, and J. Kämpf. 2017. Indoor thermal comfort assessment using different constructive solutions incorporating PCM. Applied Energy 208:1208–21. doi:https://doi.org/10.1016/j.apenergy.2017.09.032.
- Frackowiak, E., G. Lota, J. Machnikowski, C. Vix-Guterl, and F. Béguin. 2006. Optimisation of supercapacitors using carbons with controlled nanotexture and nitrogen content. Electrochimica Acta 51 (11):2209–14. doi:https://doi.org/10.1016/j.electacta.2005.04.080.
- Fu, Z., Su, L, Li, J, Yang, R, Zhang, Z, Liu, M, Li, J, Li, B. 2014. Elastic silicone encapsulation of n-hexadecyl bromide by microfluidic approach as novel microencapsulated phase change materials. Thermochimica Acta 590:24–29. doi:https://doi.org/10.1016/j.tca.2014.06.008.
- Gracia, A., and L. F. Cabeza. 2015. Phase change materials and thermal energy storage for buildings. Energy and Buildings 103:414–19. doi:https://doi.org/10.1016/j.enbuild.2015.06.007.
- Gui, X., A. Cao, J. Wei, H. Li, Y. Jia, Z. Li, et al. 2010a. Soft, highly conductive nanotube sponges and composites with controlled compressibility. ACS nano 4 (4):2320–26. doi:https://doi.org/10.1021/nn100114d.
- Gui, X., J. Wei, K. Wang, A. Cao, H. Zhu, Y. Jia, et al. 2010b. Carbon nanotube sponges. Advanced Materials 22 (5):617–21. doi:https://doi.org/10.1002/adma.200902986.
- Hamada, Y., W. Otsu, J. Fukai, Y. Morozumi, and O. Miyatake. 2005. Anisotropic heat transfer in composites based on high-thermal conductive carbon fibers. Energy 30 (2–4):221–33. doi:https://doi.org/10.1016/j.energy.2004.04.024.
- Hasnain, S. M. 1998. Review on sustainable thermal energy storage technologies, Part I: Heat storage materials and techniques. Energy Conversion and Management 39 (11):1127–38. doi:https://doi.org/10.1016/S0196-8904(98)00025-9.
- Hekimoğlu, G., et al. 2021b. Carbonized waste hazelnut wood‐based shape‐stable composite phase change materials for thermal management implementations. International Journal of Energy Research 45 (7):10271–84. doi:https://doi.org/10.1002/er.6514.
- Hekimoğlu, G., Sarı, A, Kar, T, Keleş, S, Kaygusuz, K, Tyagi, V.V, Sharma, R.K., Al-Ahmed, A, Al-Sulaiman, F.A., Saleh, T.A., et al. 2021a. Walnut shell derived bio-carbon/methyl palmitate as novel composite phase change material with enhanced thermal energy storage properties. Journal of Energy Storage 35:102288. doi:https://doi.org/10.1016/j.est.2021.102288.
- Hu, H. 2020a. Recent advances of polymeric phase change composites for flexible electronics and thermal energy storage system. Composites Part B: Engineering 195:108094. doi:https://doi.org/10.1016/j.compositesb.2020.108094.
- Hu, N., et al. 2020b. Continuous diamond-carbon nanotube foams as rapid heat conduction channels in composite phase change materials based on the stable hierarchical structure. Composites Part B: Engineering 200:108293. doi:https://doi.org/10.1016/j.compositesb.2020.108293.
- Huang, X., W. Xia, and R. Zou. 2014. Nanoconfinement of phase change materials within carbon aerogels: Phase transition behaviours and photo-to-thermal energy storage. Journal of Materials Chemistry A 2 (47):19963–68. doi:https://doi.org/10.1039/C4TA04605F.
- Huaqing, X. I. E., W. A. N. Jifen, and C. H. E. N. Lifei. 2009. Effects on the phase transformation temperature of nanofluids by the nanoparticles. Journal of Materials Sciences and Technology 24 (5):742–44.
- Inagaki, M. 2009. Pores in carbon materials-importance of their control. New Carbon Materials 24 (3):193–232. doi:https://doi.org/10.1016/S1872-5805(08)60048-7.
- Inagaki, M., J. Qiu, and Q. Guo. 2015. Carbon foam: Preparation and application. Carbon 87:128–52. doi:https://doi.org/10.1016/j.carbon.2015.02.021.
- Ishaq, T., et al. 2020. Photo-assisted splitting of water into hydrogen using visible-light activated silver doped g-C3N4 & CNTs hybrids. International Journal of Hydrogen Energy 45 (56):31574–84. doi:https://doi.org/10.1016/j.ijhydene.2020.08.191.
- Ishaq, T., M. Yousaf, I. A. Bhatti, A. Batool, M. A. Asghar, M. Mohsin, and M. Ahmad. 2021. A perspective on possible amendments in semiconductors for enhanced photocatalytic hydrogen generation by water splitting. International Journal of Hydrogen Energy 46 (79):39036–57. doi:https://doi.org/10.1016/j.ijhydene.2021.09.165.
- Jeong, S. G., S. J. Chang, S. We, and S. Kim. 2015. Energy efficient thermal storage montmorillonite with phase change material containing exfoliated graphite nanoplatelets. Solar Energy Materials and Solar Cells 139:65–70. doi:https://doi.org/10.1016/j.solmat.2015.03.010.
- Jeong, S. G., J. Jeon, O. Chung, S. Kim, and S. Kim. 2013. Evaluation of PCM/diatomite composites using exfoliated graphite nanoplatelets (xGnP) to improve thermal properties. Journal of Thermal Analysis and Calorimetry 114 (2):689–98. doi:https://doi.org/10.1007/s10973-013-3008-4.
- Ji, H., et al. 2014. Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage. Energy & Environmental Science 7 (3):1185–92. doi:https://doi.org/10.1039/C3EE42573H.
- Ji, H., D. P. Sellan, M. T. Pettes, X. Kong, J. Ji, L. Shi, and R. S. Ruoff. 2014. Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage. Energy & Environmental Science 7 (3):1185–92.
- Jia, X., et al. 2020. High thermal conductive shape-stabilized phase change materials of polyethylene glycol/boron nitride@ chitosan composites for thermal energy storage. Composites. Part A, Applied Science and Manufacturing 129:105710. doi:https://doi.org/10.1016/j.compositesa.2019.105710.
- Jurčević, M., S. Nižetić, M. Arıcı, and P. Ocłoń. 2020. Comprehensive analysis of preparation strategies for phase change nanocomposites and nanofluids with brief overview of safety equipment. Journal of Cleaner Production 274:122963. doi:https://doi.org/10.1016/j.jclepro.2020.122963.
- Jurčević, M., S. Nižetić, M. Arıcı, A. H. A. Tuan, E. Giama, and A. Papadopoulos. 2021. Thermal constant analysis of phase change nanocomposites and discussion on selection strategies with respect to economic constraints. Sustainable Energy Technologies and Assessments 43:100957. doi:https://doi.org/10.1016/j.seta.2020.100957.
- Khudhair, A. M., and M. M. Farid. 2004. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials. Energy Conversion and Management 45 (2):263–75. doi:https://doi.org/10.1016/S0196-8904(03)00131-6.
- Kim, Y. U., et al. 2021. Mechanical and thermal properties of artificial stone finishing materials mixed with PCM impregnated lightweight aggregate and carbon material. Construction and Building Materials 272:121882. doi:https://doi.org/10.1016/j.conbuildmat.2020.121882.
- Kim, S., and L. T. Drzal. 2009. High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets. Solar Energy Materials and Solar Cells 93 (1):136–42. doi:https://doi.org/10.1016/j.solmat.2008.09.010.
- Kim, K. S., Y. Zhao, H. Jang, S. Y. Lee, J. M. Kim, K. S. Kim, et al. 2009. Large-scale pattern growth of graphene films for stretchable transparent electrodes. Nature 457 (7230):706. doi:https://doi.org/10.1038/nature07719.
- Kuznik, F., D. David, K. Johannes, and J. J. Roux. 2011. A review on phase change materials integrated in building walls. Renewable and Sustainable Energy Reviews 15 (1):379–91. doi:https://doi.org/10.1016/j.rser.2010.08.019.
- Li, Y., et al. 2016. Preparation of paraffin/porous TiO2 foams with enhanced thermal conductivity as PCM, by covering the TiO2 surface with a carbon layer. Applied Energy 171:37–45. doi:https://doi.org/10.1016/j.apenergy.2016.03.010.
- Li, A., et al. 2018. Core-sheath structural carbon materials for integrated enhancement of thermal conductivity and capacity. Applied Energy 217:369–76. doi:https://doi.org/10.1016/j.apenergy.2017.12.106.
- Li, X., W. Cai, J. An, S. Kim, J. Nah, D. Yang, and S. K. Banerjee. 2009. Large-area synthesis of high-quality and uniform graphene films on copper foils. Science 324 (5932):1312–14. doi:https://doi.org/10.1126/science.1171245.
- Li, M., J. Ding, and J. Xue. 2013. Mesoporous carbon decorated graphene as an efficient electrode material for supercapacitors. Journal of Materials Chemistry A 1 (25):7469–76. doi:https://doi.org/10.1039/c3ta10890b.
- Li, C., and G. Shi. 2012. Three-dimensional graphene architectures. Nanoscale 4 (18):5549–63. doi:https://doi.org/10.1039/c2nr31467c.
- Li, F., X. Wang, and D. Wu. 2015. Fabrication of multifunctional microcapsules containing n-eicosane core and zinc oxide shell for low-temperature energy storage, photocatalysis, and antibiosis. Energy Conversion and Management 106:873–85. doi:https://doi.org/10.1016/j.enconman.2015.10.026.
- Liang, G., J. Zhang, S. An, J. Tang, S. Ju, S. Bai, and D. Jiang. 2021. Phase change material filled hybrid 2D/3D graphene structure with ultra high thermal effusivity for effective thermal management. Carbon 176:11–20. doi:https://doi.org/10.1016/j.carbon.2020.12.046.
- Lin, T., Y. Wang, H. Bi, D. Wan, F. Huang, X. Xie, and M. Jiang. 2012. Hydrogen flame synthesis of few-layer graphene from a solid carbon source on hexagonal boron nitride. Journal of Materials Chemistry 22 (7):2859–62. doi:https://doi.org/10.1039/c2jm16449c.
- Liu, H., et al. 2021a. Lamellar-structured phase change composites based on biomass-derived carbonaceous sheets and sodium acetate trihydrate for high-efficient solar photothermal energy harvest. Solar Energy Materials and Solar Cells 229:111140. doi:https://doi.org/10.1016/j.solmat.2021.111140.
- Liu, H., et al. 2021b. Development of renewable biomass-derived carbonaceous Aerogel/Mannitol Phase-Change composites for high thermal-energy-release efficiency and shape stabilization. ACS Applied Energy Materials 4 (2):1714–30. doi:https://doi.org/10.1021/acsaem.0c02864.
- Liu, X., et al. 2021c. Paraffin/Ti3C2T x Mxene@ Gelatin aerogels composite Phase-Change materials with high Solar-Thermal conversion efficiency and enhanced thermal conductivity for thermal energy storage. Energy & Fuels 35 (3):2805–14. doi:https://doi.org/10.1021/acs.energyfuels.0c04275.
- Liu, D., Lei C, Wu K, Fu Q, et al. 2020. A multidirectionally thermoconductive phase change material enables high and durable electricity via Real-Environment Solar–Thermal–Electric conversion. ACS nano 14 (11):15738–47. doi:https://doi.org/10.1021/acsnano.0c06680.
- Liu, H., X. Wang, and D. Wu. 2017. Fabrication of graphene/TiO2/paraffin composite phase change materials for enhancement of solar energy efficiency in photocatalysis and latent heat storage. ACS Sustainable Chemistry & Engineering 5 (6):4906–15. doi:https://doi.org/10.1021/acssuschemeng.7b00321.
- Maire, J., et al. 2017. Heat conduction tuning by wave nature of phonons. Science Advances 3 (8):e1700027. doi:https://doi.org/10.1126/sciadv.1700027.
- Mesalhy, O., K. Lafdi, and A. Elgafy. 2006. Carbon foam matrices saturated with PCM for thermal protection purposes. Carbon 44 (10):2080–88. doi:https://doi.org/10.1016/j.carbon.2005.12.019.
- Nie, B., et al. 2020. Discharging performance enhancement of a phase change material based thermal energy storage device for transport air-conditioning applications. Applied Thermal Engineering 165:114582. doi:https://doi.org/10.1016/j.applthermaleng.2019.114582.
- Nirwan, A., R. Kumar, B. Mondal, J. Kumar, A. Bera, and R. Kumar. 2020. Thermal performance assessment of lauric acid and palmitic acid based multi-transformation phase change material and exfoliated graphite composites. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 1–13.
- Nomura, T., N. Okinaka, and T. Akiyama. 2009. Impregnation of porous material with phase change material for thermal energy storage. Materials Chemistry and Physics 115 (2–3):846–850.s. doi:https://doi.org/10.1016/j.matchemphys.2009.02.045.
- Pasupathy, A., and R. Velraj. 2008. Effect of double layer phase change material in building roof for year round thermal management. Energy and Buildings 40 (3):193–203. doi:https://doi.org/10.1016/j.enbuild.2007.02.016.
- Pasupathy, A., R. Velraj, and R. V. Seeniraj. 2008. Phase change material-based building architecture for thermal management in residential and commercial establishments. Renewable and Sustainable Energy Reviews 12 (1):39–64. doi:https://doi.org/10.1016/j.rser.2006.05.010.
- Pettes, M. T., H. Ji, R. S. Ruoff, and L. Shi. 2012. Thermal transport in three-dimensional foam architectures of few-layer graphene and ultrathin graphite. Nano Letters 12 (6):2959–64. doi:https://doi.org/10.1021/nl300662q.
- Py, X., R. Olives, and S. Mauran. 2011. Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material. International Journal of Heat and Mass Transfer 44 (14):2727–37. doi:https://doi.org/10.1016/S0017-9310(00)00309-4.
- Qian, T., et al. 2018. Comparative study of single-walled carbon nanotubes and graphene nanoplatelets for improving the thermal conductivity and solar-to-light conversion of PEG-infiltrated phase-change material composites. ACS Sustainable Chemistry & Engineering 7 (2):2446–58. doi:https://doi.org/10.1021/acssuschemeng.8b05335.
- Reich, S., and C. Thomsen. 2004. Raman spectroscopy of graphite. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences 362 (1824):2271–88. doi:https://doi.org/10.1098/rsta.2004.1454.
- Sahimi, M. 1993. Flow phenomena in rocks: From continuum models to fractals, percolation, cellular automata, and simulated annealing. Reviews of Modern Physics 65 (4):1393.
- Sarı, A. 2004. Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: Preparation and thermal properties. Energy Conversion and Management 45 (13–14):2033–42. doi:https://doi.org/10.1016/j.enconman.2003.10.022.
- Sarı, A., and A. Karaipekli. 2007. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material. Applied Thermal Engineering 27 (8–9):1271–77. doi:https://doi.org/10.1016/j.applthermaleng.2006.11.004.
- Sarier, N., and E. Onder. 2012. Organic phase change materials and their textile applications: An overview. Thermochimica Acta 540:7–60.
- Shao, Y.-W., et al. 2021. Flexible MXene-coated melamine foam based phase change material composites for integrated solar-thermal energy conversion/storage, shape memory and thermal therapy functions. Composites. Part A, Applied Science and Manufacturing 143:106291. doi:https://doi.org/10.1016/j.compositesa.2021.106291.
- Sun, K., et al. 2021. The design of phase change materials with carbon aerogel composites for multi-responsive thermal energy capture and storage. Journal of Materials Chemistry A 9 (2):1213–20. doi:https://doi.org/10.1039/D0TA09035B.
- Tao, Y., D. Kong, C. Zhang, W. Lv, M. Wang, B. Li, et al. 2014. H. Monolithic carbons with spheroidal and hierarchical pores produced by the linkage of functionalized graphene sheets. Carbon 69:169–77. doi:https://doi.org/10.1016/j.carbon.2013.12.003.
- Tong, X., et al. 2019. Organic phase change materials confined in carbon-based materials for thermal properties enhancement: Recent advancement and challenges. Renewable and Sustainable Energy Reviews 108:398–422. doi:https://doi.org/10.1016/j.rser.2019.03.031.
- Tyagi, V. V., and D. Buddhi. 2007. PCM thermal storage in buildings: A state of art. Renewable and Sustainable Energy Reviews 11 (6):1146–66. doi:https://doi.org/10.1016/j.rser.2005.10.002.
- Wang, J., et al. 2018. Construction of CNT@ Cr-MIL-101-NH2 hybrid composite for shape-stabilized phase change materials with enhanced thermal conductivity. Chemical Engineering Journal 350:164–72. doi:https://doi.org/10.1016/j.cej.2018.05.190.
- Wang, F., et al. 2019a. A comprehensive review on phase change material emulsions: Fabrication, characteristics, and heat transfer performance. Solar Energy Materials and Solar Cells 191:218–34. doi:https://doi.org/10.1016/j.solmat.2018.11.016.
- Wang, W., et al. 2019b. Electromagnetic and solar energy conversion and storage based on Fe3O4-functionalised graphene/phase change material nanocomposites. Energy Conversion and Management 196:1299–305. doi:https://doi.org/10.1016/j.enconman.2019.06.084.
- Wang, K., J. Y. Wu, R. Z. Wang, and L. W. Wang. 2006. Effective thermal conductivity of expanded graphite–CaCl2 composite adsorbent for chemical adsorption chillers. Energy Conversion and Management 47 (13–14):1902–12. doi:https://doi.org/10.1016/j.enconman.2005.09.005.
- Wu, S., et al. 2020. Thermal conductivity enhancement on phase change materials for thermal energy storage: A review. Energy Storage Materials 25:251–95. doi:https://doi.org/10.1016/j.ensm.2019.10.010.
- Xia, L. P., Zhang, and R. Wang. 2010. Preparation and thermal characterization of expanded graphite/paraffin composite phase change material. Carbon 48 (9):2538–48. doi:https://doi.org/10.1016/j.carbon.2010.03.030.
- Xiao, M., B. Feng, and K. Gong. 2002. Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity. Energy Conversion and Management 43 (1):103–08. doi:https://doi.org/10.1016/S0196-8904(01)00010-3.
- Xiao, X., P. Zhang, and M. Li. 2013. Preparation and thermal characterization of paraffin/metal foam composite phase change material. Applied Energy 112:1357–66. doi:https://doi.org/10.1016/j.apenergy.2013.04.050.
- Xin, G., H. Sun, S. M. Scott, T. Yao, F. Lu, D. Shao, et al. 2014. Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage. ACS Applied Materials & Interfaces 6 (17):15262–71. doi:https://doi.org/10.1021/am503619a.
- Xu, Y., K. Sheng, C. Li, and G. Shi. 2010. Self-assembled graphene hydrogel via a one-step hydrothermal process. ACS nano 4 (7):4324–30. doi:https://doi.org/10.1021/nn101187z.
- Yang, Z., Y. Deng, and J. Li. 2019. Preparation of porous carbonized woods impregnated with lauric acid as shape-stable composite phase change materials. Applied Thermal Engineering 150:967–76. doi:https://doi.org/10.1016/j.applthermaleng.2019.01.063.
- Yang, C., M. E. Navarro, B. Zhao, G. Leng, G. Xu, L. Wang, et al. 2016. Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage. Solar Energy Materials and Solar Cells 152:103–10. doi:https://doi.org/10.1016/j.solmat.2016.02.022.
- Ye, Q., et al. 2018. Form-stable solar thermal heat packs prepared by impregnating phase-changing materials within carbon-coated copper foams. ACS Applied Materials & Interfaces 11 (3):3417–27. doi:https://doi.org/10.1021/acsami.8b17492.
- Yuan, K., et al. 2015. Novel slurry containing graphene oxide-grafted microencapsulated phase change material with enhanced thermo-physical properties and photo-thermal performance. Solar Energy Materials and Solar Cells 143:29–37. doi:https://doi.org/10.1016/j.solmat.2015.06.034.
- Zalba, B., J. M. Marın, L. F. Cabeza, and H. Mehling. 2003. Review on thermal energy storage with phase change: Materials, heat transfer analysis and applications. Applied Thermal Engineering 23 (3):251–83. doi:https://doi.org/10.1016/S1359-4311(02)00192-8.
- Zhang, Y., J. Ding, X. Wang, R. Yang, and K. Lin. 2006. Influence of additives on thermal conductivity of shape-stabilized phase change material. Solar Energy Materials and Solar Cells 90 (11):1692–702. doi:https://doi.org/10.1016/j.solmat.2005.09.007.
- Zhang, Z., and X. Fang. 2006. Study on paraffin/expanded graphite composite phase change thermal energy storage material. Energy Conversion and Management 47 (3):303–10. doi:https://doi.org/10.1016/j.enconman.2005.03.004.
- Zhang, L. L., and X. S. Zhao. 2009. Carbon-based materials as supercapacitor electrodes. Chemical Society Reviews 38 (9):2520–31. doi:https://doi.org/10.1039/b813846j.
- Zhang, Y., G. Zhou, K. Lin, Q. Zhang, and H. Di. 2007. Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook. Building and Environment 42 (6):2197–209. doi:https://doi.org/10.1016/j.buildenv.2006.07.023.
- Zhao, C. Y., and Z. G. Wu. 2011. Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite. Solar Energy Materials and Solar Cells 95 (2):636–43. doi:https://doi.org/10.1016/j.solmat.2010.09.032.
- Zhao, X., D. Zou, and S. Wang. 2021. Flexible phase change materials: Preparation, properties and application. Chemical Engineering Journal 431: 134231.
- Zheng, R., J. Gao, J. Wang, and G. Chen. 2011. Reversible temperature regulation of electrical and thermal conductivity using liquid–solid phase transitions. Nature Communications 2:289. doi:https://doi.org/10.1038/ncomms1288.
- Zhong, Y., M. Zhou, F. Huang, T. Lin, and D. Wan. 2013. Effect of graphene aerogel on thermal behavior of phase change materials for thermal management. Solar Energy Materials and Solar Cells 113:195–200. doi:https://doi.org/10.1016/j.solmat.2013.01.046.
- Zhou, M., T. Lin, F. Huang, Y. Zhong, Z. Wang, Y. Tang, et al. 2013. Highly conductive porous graphene/ceramic composites for heat transfer and thermal energy storage. Advanced Functional Materials 23 (18):2263–69. doi:https://doi.org/10.1002/adfm.201202638.
- Zhou, D., C. Y. Zhao, and Y. Tian. 2012. Review on thermal energy storage with phase change materials (PCMs) in building applications. Applied Energy 92:593–605. doi:https://doi.org/10.1016/j.apenergy.2011.08.025.
- Zhu, N., P. Liu, F. Liu, P. Hu, and M. Wu. 2016. Energy performance of double shape-stabilized phase change materials wallboards in office building. Applied Thermal Engineering 105:180–88. doi:https://doi.org/10.1016/j.applthermaleng.2016.05.128.