86
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Effect of blade width on ultra-low specific speed axial turbines

ORCID Icon, ORCID Icon, , ORCID Icon &
Pages 6063-6077 | Received 02 Mar 2022, Accepted 17 Jun 2022, Published online: 29 Jun 2022

References

  • Chenyang, W., Y. Bo, L. Huan, S. Junjie, and G. Tianhao. 2020. Influence of different number of stay vane on hydraulic performance of ultra-low specific speed turbine. Water Power 46 (2):71–74.
  • Feikuang, Z. 2004. Energy saving in cooling towers with hydrodynamic fans. Industrial Water Waste Water 35 (1):60–61.
  • Fisenko, S. P., A. A. Brin, and A. I. Petruchik. 2004. Evaporative cooling of water in a mechanical draft cooling tower. International Journal of Heat and Mass Transfer 47 (1):165–77. doi:10.1016/S0017-9310(03)00409-5.
  • Hankuo, F. Study on Optimization of Axial Flow Turbine with Ultra-low-ratio Rotational Speed. [ Master’s thesis]. North China University of Water Resources and Electric Power. 2017.
  • Kaining, Z., L. Long, and X. Kaige. 2012. Hydraulic design and numerical simulation of super low specific speed Francis turbine runner. Energy Engineering 14(4):6–9.
  • Min, Z., Q. Bo, and S. Yongcheng. 2019. Design and CFD analysis of axial outflow volute of hydraulic turbine for cooling towers. China Rural Water and Hydropower 6:153–158.
  • Naik, B. K., and P. Muthukumar. 2017. A novel approach for performance assessment of mechanical draft wet cooling towers. Applied Thermal Engineering 121:14–26. doi:10.1016/j.applthermaleng.2017.04.042.
  • Nishi, Y., T. Kobori, N. Mori, T. Inagaki, and N. Kikuchi. 2019. Study of the internal flow structure of an ultra-small axial flow hydraulic turbine. Renewable Energy 139:1000–11. doi:10.1016/j.renene.2019.03.004.
  • Pengyan, Z., B. Xiangyu, and H. Zhilei. 2017. Influence of blade number on hydraulic performance of super low specific speed turbine of cooling tower. Journal of Water Resources and Architectural Engineering 210(6): 177–180.
  • Shengzhu, L., G. Pengcheng, J. Xingying, and L. Xingqi. 2004. A method for extrapolation of the inlet and outlet of blade in Francis runner. China Rural Water and Hydropower 118(12):114–15.
  • Shihui, L., L. Yangpin, and Z. Zichao. 2018. Theoretical study and experiment on turbine operating characteristics of turbine-fan units. Journal Of Hydroelectric Engineering 37 (5):125–32.
  • Shubin, Z., Y. Bo, L. Xiang, and L. Dongsheng. 2017. 3D modeling of blades of Francis turbine based on Matlab UG. Yangtze River 48 (14):79–81.
  • Trivedi, C., and M. J. Cervantes. 2017. Fluid-structure interactions in Francis turbines: A perspective review. Renewable and Sustainable Energy Reviews 68:87–101. doi:10.1016/j.rser.2016.09.121.
  • Xiuli, M., L. Chunhua, Q. Bo, Z. Yuan, L. Wenling, and Z. Xun. 2018. Design and numerical simulation of volute axial outflow hydraulic turbine with low specific speed. Transactions of the Chinese Society for Agricultural Machinery 49 (5):204–11.
  • Xueyi, Q., C. Yile, L. Youyu, and M. Zheng. 2005. Computer aided hydraulic design of axial flow runner blades with hypernormally low specific speed. Journal of Chinese Society of Power Engineering 25 (1):107–10.
  • Yang, C., Z. Daqing, L. Lingyu, and C. Shifan. 2014. Numerical simulation and hydrodynamics optimization of direct-drive Francis turbine runner in cooling towers. Journal of Drainage and Irrigation Machinery Engineering 32 (7):600–05.
  • Yang, D. Model optimization and experimental study of ultra-low specific speed axial turbine. [ Master’s thesis]. North China University of Water Resources and Electric Power. 2020.
  • Yangpin, L., N. Haipeng, and C. Dexin. 2011a. Performance and type selection of special hydraulic turbine in cooling tower. Journal Of Hydroelectric Engineering 30 (1):175–79.
  • Yangpin, L., N. Haipeng, and C. Dexin. 2011b. Study on regulation characteristics of special turbine-fan unit in cooling tower. Journal Of Hydroelectric Engineering 30 (3):187–90.
  • Yanpin, L. Study on Special Ultra-low Special Speed Francis Turbine in Cooling Tower. [ PhD thesis]. Xi’an University of Technology, 2011.
  • Youyu, L., and H. Jiang. 2012. Hydraulic design of axial turbine blades with ultra-low specific speed for decreasing capacity and increasing efficiency. China Mechanical Engineering 23 (3):320.
  • Yuan, Z., and C. Dexin. 2011. Turbine. Beijing: China WaterPower Press.
  • Zhang, L., Y. Zheng, D. Zhou, and Y. Mao. January 2010. Study on a Francis turbine with super-low specific speed applied in cooling towers. ASME International Mechanical Engineering Congress and Exposition 44441:755–59.
  • Zhiping, Z., Q. Bo, L. Wenling, L. Jiajia, and L. Yue. 2016. Design and numerical simulation of elliptic spiral case of turbine in cooling tower. Water Resources and Power 34 (11):175–77.
  • Zhou, D., H. Chen, and C. Yang. 2015. A highly efficient Francis turbine designed for energy recovery in cooling towers. Advances in Mechanical Engineering 7 (3):1687814015575976. doi:10.1177/1687814015575976.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.