Optimization of cuttings slurry system for re-injection of oil-based drilling cuttings

References

• Andrade, G. M. P., B. F. Oechsler, J. S. C. Coelho, F. M. Fagundes, F. O. Arouca, J. J. R. Damasceno, C. M. Scheid, and L. A. Calcada. 2021. Evaluation of characteristic diameter on barite settling in drilling fluids by Monte Carlo method. Journal of Petroleum Science and Engineering 206:109072. doi:10.1016/j.petrol.2021.109072.
   Web of Science ®Google Scholar
• Cao, L., H. Zhou, and S. Z. Cao. 2019. Reinjection of depleted well with oil-free or low oil-bearing rock cuttings pretreatment method. Chinese Invention Patent. 201911226361 .7.
   Google Scholar
• Chauvin, E. 2018, November. Efficiency, economics and compliance: A practical planning tool for optimizing cuttings treatment. Abu Dhabi International Petroleum Exhibition & Conference, OnePetro, SPE-192825-MS. doi: 10.2118/192825-MS.
   Google Scholar
• Dantas, T. N. D. C., D. N. N. da Silva, A. A. Dantas Neto, T. J. D. O. Cabral, and A. S. D. dos Anjos. 2020. Treatment of drill cuttings using microemulsion. Journal of Petroleum Exploration and Production Technology 10:1243–51. doi:10.1007/s13202-019-00813-3.
   Web of Science ®Google Scholar
• Deshpande, A., P. Jones, R. Jadhav, G. Pangu, and V. Mishra 2019, March. Comparative study of the mechanical properties of reduced density cements. SPE Middle East Oil and Gas Show and Conference, OnePetro, SPE-194918-MS. doi: 10.2118/194918-MS.
   Google Scholar
• Gaurina, M., N. Pašić, and B. Mijić, P., and I. Medved. 2020. Deep underground injection of waste from drilling activities — an overview. Minerals 10 (4):303. doi:10.3390/min10040303.
   Web of Science ®Google Scholar
• Gumarov, S., S. Benelkadi, E. Bianco, S. Woolf, C. Hardy, H. Ido, T. Manabu, T. Naohiro, Y. Kazuhiro, O. Taker, et al. 2018, November. First implementation of real-time subsurface monitoring for cuttings reinjection offshore Abu Dhabi. In Abu Dhabi International Petroleum Exhibition & Conference, OnePetro, SPE-192884-MS. doi: 10.2118/192884-MS.
   Google Scholar
• Haddad, M., A. Rashed Al-Aleeli, T. Toki, R. Pratap Narayan Singh, S. Gumarov, S. Benelkadi, B. Eduardo, M. Craig, and P. Burton 2018, November. Drill cuttings injection done right: First million barrels injected with ultimate subsurface uptime offshore Abu Dhabi. Abu Dhabi International Petroleum Exhibition & Conference, OnePetro, SPE-192748-MS. doi: 10.2118/192748-MS.
   Google Scholar
• Huang, Z., Z. Y. Xu, Y. H. Quan, H. Jia, J. Li, Q. C. Li, Z. Chen, and K. L. Pu 2018. A review of treatment methods for oil-based drill cuttings. IOP Conf. Series: Earth and Environmental Science, 170. doi : 10.1088/1755-1315/170/2/022074.
   Google Scholar
• Jiang, Z. W., B. J. Li, and J. B. Zhang. 2019. Analysis and application of cuttings reinjection in Tambococha oilfield, Ecuador. Drilling & Production Technology 42 (3):27–30+7.
   Google Scholar
• Jiang, H. S., J. Peng, Q. G. Xiang, J. L. Yu, G. B. Jiang, and H. Li. 2021. Environmental risk monitoring of oil-bearing cuttings deep reinjection experiment. Guangdong Chemical Industry 48 (15):156–57.
   Google Scholar
• Kholy, S. M., O. Sameh, N. Mounir, M. Shams, I. M. Mohamed, A. Abou-Sayed, and O. Abou-Sayed 2019, March. Evaluating the feasibility of waste slurry injection in an oil prospect in the western desert, Egypt. SPE Middle East Oil and Gas Show and Conference, OnePetro, SPE-194837-MS. doi: 10.2118/194837-MS.
   Google Scholar
• Lapeyre, J., H. Ma, and A. Kumar. 2019. Effect of particle size distribution of metakaolin on hydration kinetics of tricalcium silicate. Journal of the American Ceramic Society 102 (10):5976–88. doi:10.1111/jace.16467.
   Web of Science ®Google Scholar
• Long, L., Y. Da, L. Fengbao, Y. Zihang, M. Cha, and L. Xiao 2018, January. Application of innovative high temperature deep pyrolysis technology to treat drilling cuttings harmlessly in Tarim Basim. SPE/IADC Middle East Drilling Technology Conference and Exhibition, OnePetro, SPE-189378-MS. doi: 10.2118/189378-MS.
   Google Scholar
• Mohamed, I. M., G. Block, O. Abou-Sayed, and A. S. Abou-Sayed. 2017. Industrial waste injection feasibility in North Dakota. Journal of Petroleum Science and Engineering 159:267–78. doi:10.1016/j.petrol.2017.09.028.
   Web of Science ®Google Scholar
• Petri, I., A. C. Silva Mota, A. L. Martins, C. H. Marques, M. S. Pereira, and C. H. Ataíde 2019, October. Microwave Drying of Reservoir Drilled Cuttings. Presented at the Offshore Technology Conference Brasil, Rio de Janeiro, Brazil, 29-31. OTC-29964-MS. doi:10.4043/29964-MS.
   Google Scholar
• Puiseux, A., A. Guillou, and T. Merzi 2020, July. Overview of drill cuttings management options through modeling, monitoring and life cycle assessment. In SPE International Conference and Exhibition on Health, Safety, Environment, and Sustainability, OnePetro, SPE-199403-MS. doi: 10.2118/199403-MS.
   Google Scholar
• Qazvini, S., A. Golkari, A. Azdarpour, R. M. Santos, M. S. Safavi, and M. Norouzpour. 2021. Experimental and modelling approach to investigate the mechanisms of formation damage due to calcium carbonate precipitation in carbonate reservoirs. Journal of Petroleum Science and Engineering 205:108801. doi:10.1016/j.petrol.2021.108801.
   Web of Science ®Google Scholar
• Sharif, M. A., N. V. R. Nagalakshmi, S. S. Reddy, G. Vasanth, and K. Sanker. 2017. Drilling waste management and control the effects. Journal of Advanced Chemical Engineering 7 (1):166. doi:10.4172/2090-4568.1000166.
   Google Scholar
• Tabatabaei, M., A. D. Taleghani, and N. Alem 2019, April. Economic nano-additive to improve cement sealing capability. Presented at the SPE Western Regional Meeting, San Jose, CA, 23-26. SPE-195259-MS. doi: 10.2118/195259-MS.
   Google Scholar
• Wang, X. Y., K. N. Zhang, C. B. Guo, K. J. Chen, and Y. Li. 2015. A numerical method for simulating cuttings reinjection. Hydrogeology &engineering Geology 42 (6):137–44. doi:10.16030/j.cnki.issn.1000-3665.2015.06.22.
   Google Scholar
• Wise, J., A. Cedola, R. Nygaard, G. Hareland, Ø. Arild, H. P. Lohne, and E. P. Ford. 2020. Wellbore characteristics that control debonding initiation and microannuli width in finite element simulations. Journal of Petroleum Science and Engineering 191:107157. doi:10.1016/j.petrol.2020.107157.
   Web of Science ®Google Scholar
• Wu, J., J. Pan, H. Wang, L. Wang, X. Lan, L. Yang, and W. Liu 2019, March. The application of cyclone desorption technology for OBM drill cuttings disposal. International Petroleum Technology Conference, OnePetro, IPTC-19223-MS. doi: 10.2523/IPTC-19223-MS.
   Google Scholar
• Xiong, F., Y. Wang, G. Q. Zhang, and W. P. Kou. 2014. Application of cuttings reinjection in Bohai offshore oilfield. Journal of Petroleum and Natural Gas (Journal of Jianghan Petroleum Institute) 36 (9):171–4+9.
   Google Scholar
• Yan, Z., J. X. Wen, and W. Wang. 2021. Cuttings reinjection technology in ITT block, Ecuador. Complex Hydrocarbon Reservoirs 14 (1):102–06. doi:10.16181/j.cnki.fzyqc.2021.01.020.
   Google Scholar
• Zhang, C. Y. 2018, April. Modeling offshore drill cuttings discharge. Presented at the SPE International Conference on Health, Safety, Security, Environment, and Social Responsibility held in Abu Dhabi, UAE, 16-18. SPE-190500-MS. doi: 10.2118/190500-MS.
   Google Scholar
• Zheng, L. X., and D. Y. Chang. 2017. Application of cuttings reinjection technology in drilling of ITT field in ecuador. China Petroleum and Petrochemical 8:81–84.
   Google Scholar