0
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Thermo-kinetic behavior of closed-loop heat pump dryer with different drying chambers for holy basil leaves drying application: an experiment approach

ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon
Pages 10019-10032 | Received 27 Feb 2024, Accepted 18 Jul 2024, Published online: 26 Jul 2024

References

  • Adapa, P. K., G. J. Schoenau, and S. Sokhansanj. 2002. Performance study of a heat pump dryer system for specialty crops - part 2: Model verification. International Journal of Energy Research 26 (11):1021–33. doi:10.1002/er.835.
  • Aktaş, M., A. Khanlari, B. Aktekeli, and A. Amini. 2017. Analysis of a new drying chamber for heat pump mint leaves dryer. International Journal of Hydrogen Energy 42 (28):18034–44. doi:10.1016/j.ijhydene.2017.03.007.
  • Aktaş, M., L. Taşeri, S. Şevik, M. Gülcü, G. Uysal Seçkin, and E. Can Dolgun. 2019. Heat pump drying of grape pomace: Performance and product quality analysis. Drying Technology 37 (14):1766–79. doi:10.1080/07373937.2018.1536983.
  • Ashok Kumar, M., G. Kumaresan, and S. Rajakarunakaran. 2020. Experimental study of moisture removal rate in moringa leaves under vacuum pressure in closed-loop heat pump dryer. Materials Today: Proceedings 45 (xxxx):1205–10. doi:10.1016/j.matpr.2020.04.244.
  • Babu, A. K., G. Kumaresan, V. Antony Aroul Raj, and R. Velraj. 2020. CFD studies on different configurations of drying chamber for thin-layer drying of leaves. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 42 (18):2227–39. doi:10.1080/15567036.2019.1607935.
  • Cao, X., J. Zhang, Z. Yu Li, L. Liang Shao, and C. Lu Zhang. 2021. Process simulation and analysis of a closed-loop heat pump clothes dryer. Applied Thermal Engineering 199 (September):117545. doi:10.1016/j.applthermaleng.2021.117545.
  • Ceylan, I., and A. Etem Gürel. 2016. Solar-assisted fluidized bed dryer integrated with a heat pump for mint leaves. Applied Thermal Engineering 106:899–905. doi:10.1016/j.applthermaleng.2016.06.077.
  • Chanpet, M., N. Rakmak, N. Matan, and C. Siripatana. 2020. Effect of air velocity, temperature, and relative humidity on drying kinetics of rubberwood. Heliyon 6 (10):e05151. doi:10.1016/j.heliyon.2020.e05151.
  • Chaves, R. P. F., A. L. de Araújo, A. Santos Lopes, and R. da Silva Pena. 2023. Convective drying of purple basil (Ocimum Basilicum L.) leaves and stability of chlorophyll and phenolic compounds during the process. Plants 12 (1):127. doi:10.3390/plants12010127.
  • Chinnasamy, S., and A. Arunachalam. 2023. Experimental investigation on direct expansion solar-air source heat pump for water heating application. Renewable Energy 202 (January):222–33. doi:10.1016/j.renene.2022.11.099.
  • Chinnasamy, S., K. B. Prakash, B. Kalidasan, and A. Sampathkumar. 2024. Optimal utilisation of low-grade solar-air source for heat pump water heating using a dual-source evaporator with forced convection. International Communications in Heat and Mass Transfer 150 (January):107174. doi:10.1016/j.icheatmasstransfer.2023.107174.
  • Chuwattanakul, V., K. Wongcharee, M. Pimsarn, and S. Chokphoemphun. 2022. Case studies in thermal engineering effect of conical air distributors on drying of peppercorns in a fluidized bed dryer: Prediction using an artificial neural network. Case Studies in Thermal Engineering 36 (February):102188. doi:10.1016/j.csite.2022.102188.
  • Coşkun, S., A. Riza Motorcu, N. Yamankaradeniz, and E. Pulat. 2012. Evaluation of control parameters’ effects on system performance with Taguchi method in waste heat recovery application using mechanical heat pump. International Journal of Refrigeration 35 (4):795–809. doi:10.1016/j.ijrefrig.2011.12.008.
  • Fatouh, M., M. N. Metwally, A. B. Helali, and M. H. Shedid. 2006. Herbs drying using a heat pump dryer. Energy Conversion and Management 47 (15–16):2629–43. doi:10.1016/j.enconman.2005.10.022.
  • Ghasemkhani, H., A. Keyhani, M. Aghbashlo, S. Rafiee, and A. S. Mujumdar. 2016. Improving exergetic performance parameters of a rotating-tray air dryer via a simple heat exchanger. Applied Thermal Engineering 94:13–23. doi:10.1016/j.applthermaleng.2015.10.114.
  • Hamid, K., U. Sajjad, K. Shing Yang, S. Kuo Wu, and C. Chuan Wang. 2022. Assessment of an energy efficient closed loop heat pump dryer for high moisture contents materials: An experimental investigation and AI based modelling. Energy 238:121819. doi:10.1016/j.energy.2021.121819.
  • Hu, Z., Y. Li, H. S. El-Mesery, D. Yin, H. Qin, and F. Ge. 2022. Design of new heat pump dryer system: A case study in drying characteristics of kelp knots. Case Studies in Thermal Engineering 32 (November 2021):101912. doi:10.1016/j.csite.2022.101912.
  • Li, Y. H., and W. Chun Kao. 2018. Taguchi optimization of solar thermal and heat pump combisystems under five distinct climatic conditions. Applied Thermal Engineering 133:283–97. doi:10.1016/j.applthermaleng.2018.01.002.
  • Li, Z., W. Wu, J. Wang, H. Wang, and X. Yu. 2021. Effect of Compressor speeds on performance of a closed loop heat pump drying system. Applied Thermal Engineering 195 (November 2020):117220. doi:10.1016/j.applthermaleng.2021.117220.
  • López-Ortiz, A., F. Ituna-Yudonago, J. Carlos Gallardo-Brígido, N. Iván Román-Roldán, J. Rodríguez-Ramírez, and A. Martynenko. 2023. Energy analysis of drying basil (Ocimum Basilicum) leaves in an active greenhouse solar dryer. Journal of Food Process Engineering 46 (3):1–14. doi:10.1111/jfpe.14257.
  • Meng, Z., X. Cui, H. Zhang, Y. Liu, Z. Wang, and F. Zhang. 2023. Study on drying characteristics of yam slices under heat pump-electrohydrodynamics combined drying. Case Studies in Thermal Engineering 41 (August 2022):102601. doi:10.1016/j.csite.2022.102601.
  • Patel, K. K., and A. Kar. 2012. Heat pump assisted drying of agricultural produce—an overview. Journal of Food Science & Technology 49 (2):142–60. doi:10.1007/s13197-011-0334-z.
  • Sagar, V. R., and P. Suresh Kumar. 2010. Recent advances in drying and dehydration of fruits and vegetables: A review. Journal of Food Science & Technology 47 (1):15–26. doi:10.1007/s13197-010-0010-8.
  • Sivasakthivel, T., K. Murugesan, and H. R. Thomas. 2014. Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept. Applied Energy 116:76–85. doi:10.1016/j.apenergy.2013.10.065.
  • Soysal, Y., and S. Öztekin. 2001. Comparison of seven equilibrium moisture content equations for some medicinal and aromatic plants. Journal of Agricultural and Engineering Research 78 (1):57–63. doi:10.1006/jaer.2000.0636.
  • Stapenhurst, T., and A. Bendell. 1990. Taguchi methods. The Journal of the Operational Research Society 41 (9):887–88. doi:10.1057/jors.1990.132.
  • Su, W., D. Ma, Z. Lu, W. Jiang, F. Wang, and Z. Xiaosong. 2022. A novel absorption-based enclosed heat pump dryer with combining liquid desiccant dehumidification and mechanical vapor recompression: Case study and performance evaluation. Case Studies in Thermal Engineering 35 (May):102091. doi:10.1016/j.csite.2022.102091.
  • Taghian Dinani, S., and M. Havet. 2015. Effect of voltage and air flow velocity of combined convective-electrohydrodynamic drying system on the physical properties of mushroom slices. Industrial Crops and Products 70:417–26. doi:10.1016/j.indcrop.2015.03.047.
  • Tunckal, C., and İ. Doymaz. 2020. Performance analysis and mathematical modelling of banana slices in a heat pump drying system. Renewable Energy 150:918–23. doi:10.1016/j.renene.2020.01.040.
  • Upadhyay, R. K. 2017. Tulsi: A holy plant with high medicinal and therapeutic value. International Journal of Green Pharmacy 11 (1):S1–12.
  • Wang, D., X. Cao, X. Li, Y. Li, and X. Wang. 2021. Experimental investigation of a part air dehumidification cascade-like heat pump drying system. International Journal of Refrigeration 131:235–43. doi:10.1016/j.ijrefrig.2021.07.035.
  • Yahya, M., H. Fahmi, R. Hasibuan, and A. Fudholi. 2023. Development of hybrid solar-assisted heat pump dryer for drying Paddy. Case Studies in Thermal Engineering 45 (January):102936. doi:10.1016/j.csite.2023.102936.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.