References
- Abu-Khader, M. M. 2007. Recent progress in CO2 capture/sequestration: A review. Energy Sources, Part A: Recovery Util. Environ. Eff. 28:1261–1279.
- Cussler, E. L. 1997. Diffusion Mass Transfer in Fluid Systems. Cambridge: Cambridge University Press.
- Demirbas, A. 2006. Correlations between carbon dioxide emissions and carbon contents of fuels. Energy Sources Part B: Econ. Plann. Policy. 1:421–427.
- Descampsa, C., Boualloua, C., and Kanniche, M. 2008. Efficiency of an integrated gasification combined cycle (IGCC) power plant including CO2 removal. Energy – Int. J. 33:874–881.
- Domenichini, R., Gallio, M., and Lazzaretto, A. 2010. Combined production of hydrogen and power from heavy oil gasification: Pinch analysis, thermodynamic and economic evaluations. Energy – Int. J. 35:2184–2193.
- Epps, R. 1994. Use of selexol solvent for hydrocarbon dewpoint control and dehydration of natural gas. Presented at the Laurance Reid Gas Conditioning Conference, Norman, OK.
- Gielen, D. 2003. CO2 removal in the iron and steel industry. Energy Convers. Manage. 44:102737.
- Lampert, K., and Ziebik, A. 2007. Comparative analysis of energy requirements of CO2 removal from metallurgical fuel gases. Energy – Int. J. 32:521–527 [ special issue ECOS’05].
- Lang, H. J. 1947. Cost relationship in preliminary cost estimation. Chem. Eng. 54: 117–121 Bookmark.
- McCabe, W. L., Smith, J. C., and Harriott, P. 2002. Unit Operations of Chemical Engineering, 2nd Ed. New York: McGraw Hill Chemical Engineering Series.
- Mofarahi, M., Khojasteh, Y., Khaledi, H., and Farahnak, A. 2008. Design of CO2 absorption plant for recovery of CO2 from flue gases of gas turbine. Energy – Int. J. 33:1311–1319.
- Peters, M., and Timmerhaus, D. 2003. Plant Design and Economics for Chemical Engineers, 5th Ed. New York: McGraw Hill’s Chemical Engineering Series.
- Pfaff, I., Oexmann, J., and Kather, A. 2010. Optimised integration of post-combustion CO2 capture process in Greenfield power plants. Energy – Int. J. 35:4030–4041.
- Sen, S. 2011. An overview of clean coal technologies II: Mitigating the environmental impacts by continuous improvement in coal combustion and CCS technology. Energy Sources, Part B: Econ. Plann. Policy. 6:118–125.
- Sinnot, R. K. 2005. Chemical Engineering Design, 4th Ed. Coulson & Richardson’s Chemical Engineering series Vol. 6. Amsterdam: Elsevier.
- Ziebik, A., Lampert, K., and Szega, M. 2008. Energy analysis of a blast-furnace system operating with the Corex process and CO2 removal. Energy – Int. J. 33:199–205.