Boiling Augmentation with Micro/Nanostructured Surfaces: Current Status and Research Outlook

REFERENCES

• S. Nukiyama. The Maximum and Minimum Values of the Heat Q Transmitted from Metal to Boiling Water under Atmospheric Pressure, International Journal of Heat and Mass Transfer, Vol. 9, pp. 1419–1433, 1966; Vol. 27, pp. 959–970, 1984.
   Google Scholar
• M. Jakob and W. Fritz. Versuche über den Verdampfungsvorgang, Forsch. Ingenieurwes, Vol. 2, pp. 435–447, 1931.
   Google Scholar
• P J. Berenson. Experiments on Pool Boiling Heat Transfer, International Journal of Heat and Mass Transfer, Vol. 5, pp. 985–999, 1962.
   Google Scholar
• H.B. Clark, P.H. Strenge, and J.W. Westwater. Active Sites for Nucleate Boiling, Chemical Engineering Progress Symposium Series, Vol. 55, No. 29, pp. 103–110, 1959.
   Google Scholar
• P. Griffith and J.D. Wallis. The Role of Surface Conditions in Nucleate Boiling, Chemical Engineering Progress Symposium Series, Vol. 56, No. 49, pp. 49–63, 1960.
   Google Scholar
• S.G. Bankoff. Ebullition from Solid Surfaces in Absence of Pre-Existing Gaseous Phase, Transactions of the ASME, 1956.
   Google Scholar
• S.G. Bankoff. Ebullition from Solid Surfaces in the Presence of a Pre-Existing Gaseous Phase, Transactions of the ASME, Vol. 79, pp. 735–741, 1957.
   Google Scholar
• S.G. Bankoff. Entrapment of Gas in the Spreading of a Liquid over a Rough Surface, AICHe Journal, Vol. 4, No. 1, pp. 24–26, 1958.
   Web of Science ®Google Scholar
• P.J. Marto and W.M. Rohsenow. Effects of Surface Conditions on Nucleate Pool Boiling of Sodium, Journal of Heat Transfer, Vol. 88, pp. 196–204, 1966.
   Web of Science ®Google Scholar
• C.F. Gottzmann, P.S. O’Neill, and P.E. Minton. High Efficiency Heat Exchangers, Chemical Engineering Progress, Vol. 69, No. 7, pp. 69–75, 1973.
   Web of Science ®Google Scholar
• R.X. Young and R.L. Hummel. Improved Nucleate Boiling Heat Transfer, Chemical Engineering Progress Symposium Series, Vol. 61, No. 59, pp. 264–270, 1965.
   Google Scholar
• J.C. Chen. Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow, Industrial and Enginering Chemistry Process Design and Development, Vol. 5, No. 3, pp. 322–339, 1966.
   Web of Science ®Google Scholar
• J.R. Thome. Enhanced Boiling Heat Transfer, Hemisphere, New York, 1990.
   Google Scholar
• R.L. Webb. Principles of Enhanced Heat Transfer, John Wiley & Sons, New York, 1994.
   Google Scholar
• J. Kim. Review of Nucleate Pool Boiling Heat Transfer Mechanisms, International Journal of Multiphase Flow, Vol. 35, pp. 1067–1076, 2009.
   Web of Science ®Google Scholar
• B.B. Mikic and W.M. Rohsenhow. A New Correlation of Pool Boiling Data Including the Effect of Heating Surface Characteristics, Journal of Heat Transfer, Vol. 9, pp. 245–250, 1969.
   Web of Science ®Google Scholar
• S. Jung and H. Kim. Synchronized Measurement of Liquid–Vapor Phase and Temperature Distribution on a Boiling Surface During Single Bubble Nucleate Boiling, Proceedings of the 8th International Conference on Multiphase Flow, 26–31 May, Jeju, Korea, 2013.
   Google Scholar
• C. Gerardi, J. Buongiorno, L. Hu, and T. McKrell. Study of Bubble Growth in Water Pool Boiling through Synchronized, Infrared Thermometry and High-Speed Video, International Journal of Heat and Mass Transfer, Vol. 53, pp. 4185–4192, 2010.
   Web of Science ®Google Scholar
• S.S. Kutateladze. On the Transition to Film Boiling under Natural Convection, Kotloturbostroenie, Vol. 3, pp. 10–12, 1948.
   Google Scholar
• N., Zuber. Hydrodynamic Aspects of Boiling Heat Transfer, PhD Thesis, University of California Los Angeles, Los Angeles, CA, USAEC Report AECU-4439, 1959.
   Google Scholar
• Y. Haramura and Y.A. Katto. A New Hydrodynamic Model of Critical Heat Flux Applicable Widely to Both Pool and Forced Convection Boiling on Submerged Bodies in Saturated Liquids, International Journal of Heat and Mass Transfer, Vol. 26, pp. 389–399, 1983.
   Web of Science ®Google Scholar
• I.C. Bang, S.H. Chang, and W. Baek. Visualization of a Principle Mechanism of Critical Heat Flux in Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 48, pp. 5371–5385, 2005.
   Web of Science ®Google Scholar
• A. Ono and H. Sakashita. Liquid–Vapor Structure Near Heating Surface at High Heat Flux in Subcooled Pool Boiling, International Journal of Heat and Mass Transfer, Vol. 50, pp. 3481–3489, 2007.
   Web of Science ®Google Scholar
• H.S. Ahn and M.H. Kim. Visualization Study of Critical Heat Flux Mechanism on a Small and Horizontal Copper Heater, International Journal of Multiphase Flow, Vol. 41, pp. 1–12, 2012.
   Web of Science ®Google Scholar
• S. Gong, W. Ma, and T.-N. Dinh. An Experimental Study of Rupture Dynamics of Evaporating Liquid Films on Different Heater Surfaces, International Journal of Heat and Mass Transfer, Vol. 54, pp. 1538–1547, 2011.
   Web of Science ®Google Scholar
• S. Gong, W. Ma, and T.-N. Dinh. Simulation and Validation of the Dynamics of Liquid Films Evaporating on Horizontal Heater Surfaces, Applied Thermal Engineering, Vol. 48, pp. 486–494, 2012.
   Web of Science ®Google Scholar
• C.K. Guan, J.F. Klausner, and R. Mei. A New Mechanistic Model for Pool Boiling CHF on Horizontal Surfaces, International Journal of Heat and Mass Transfer, Vol. 54, pp. 3960–3969, 2011.
   Web of Science ®Google Scholar
• S. Nishio and H. Tanaka. Visualization of Boiling Structures in High Heat-Flux Pool-Boiling, International Journal of Heat and Mass Transfer, Vol. 47, pp. 4559–4568, 2004.
   Web of Science ®Google Scholar
• F. Demiray and J. Kim. Microscale Heat Transfer Measurements during Pool Boiling of FC-72: Effect of Subcooling, International Journal of Heat and Mass Transfer, Vol. 47, pp. 3257–3268, 2004.
   Web of Science ®Google Scholar
• W.R. McGillis, V.P. Carey, J.S. Fitch, and W.R. Hamburgen. Pool Boiling Enhancement Techniques for Water at Low Pressure, Proceedings of the Seventh Annual IEEE SEMITHERM Symposium, 12–14 February, Phoenix, AZ, 1991.
   Google Scholar
• R. Chen, M.C. Lu, V. Srinivasan, Z. Wang, H.H. Cho, and A. Majumdar. Nanowires for Enhanced Boiling Heat Transfer, Nano Letters, Vol. 9, pp. 548e553, 2009.
   Google Scholar
• Z. Yao, Y.-W. Lu, and S.G. Kandlikar. Effects of Nanowire Height on Pool Boiling Performance of Water on Silicon Chips, International Journal of Thermal Sciences, Vol. 50, No. 11, pp. 2084–2090, 2011.
   Web of Science ®Google Scholar
• S.G. Kandlikar. A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects Contact Angle and Orientations, Journal of Heat Transfer, Vol. 123, pp. 1071–1079, 2001.
   Web of Science ®Google Scholar
• A.R. Betz, J. Xu, H. Qiu, and D. Attinger. Do Surfaces with Mixed Hydrophilic and Hydrophobic Areas Enhance Pool Boiling? Applied Physics Letters, Vol. 97, p. 141909, 2010.
   Web of Science ®Google Scholar
• C. Li, Z. Wang, P.-I. Wang, Y. Peles, N. Koratkar, and G.P. Peterson. Nanostructured Copper Interfaces for Enhanced Boiling, Small, Vol. 4, No. 8, pp. 1084–1088, 2008.
   PubMed Web of Science ®Google Scholar
• J. Weibel, S. Kim, T. Fisher, and S.V. Garimella. Carbon Nanotube Coatings for Enhanced Capillary-Fed Boiling from Porous Microstructures, Nanoscale and Microscale Thermophysical Engineering, Vol. 16, No. 1, pp. 1–17, 2012.
   Web of Science ®Google Scholar
• X. Dai, X. Huang, F. Yang, X. Li, J. Sightler, Y. Yang, and C. Li. Enhanced Nucleate Boiling on Horizontal Hydrophobic–Hydrophilic Carbon Nanotube Coatings, Applied Physics Letters, Vol. 102, No. 16, p. 161605: 1–5, 2013.
   Web of Science ®Google Scholar
• C. Li and G.P. Peterson. Parametric Study of Pool Boiling on Horizontal Highly Conductive Microporous Coated Surfaces, Journal of Heat Transfer, Vol. 129, No. 11, pp. 1465–1475, 2007.
   Web of Science ®Google Scholar
• Y. Nam, E. Aktinol, V.K. Dhir, and S. Ju. Single Bubble Dynamics on a Superhydrophilic Surface with Artificial Nucleation Sites, Interntaional Journal of Heat and Mass Transfer, Vol. 54, Nos. 7–8, pp. 1572–1577, 2011.
   Web of Science ®Google Scholar
• K.-H. Chu, R. Enright, and E.N. Wang. Structured Surfaces for Enhanced Pool Boiling Heat Transfer, Applied Physics Letters, Vol. 110, p. 241603, 2012.
   Google Scholar
• O. O’Hanley, C. Coyle, J. Buongiorno, T. McKrell, L.-W. Hu, M. Rubner, and R. Cohen. Separate Effects of Surface Roughness, Wettability, and Porosity on the Boiling Critical Heat Flux, Applied Physics Letters, Vol. 103, p. 024102, 2013.
   Web of Science ®Google Scholar
• K.-H. Chu, Y.S. Joung, R. Enright, C.R. Buie, and E.N. Wang. Hierarchically Structured Surfaces for Boiling Critical Heat Flux Enhancement, Applied Physics Letters, Vol. 102, p. 151602, 2013.
   Web of Science ®Google Scholar
• K. Sefiane, D. Benielli, and A. Steinchen. A New Mechanism for Pool Boiling Crisis, Recoil Instability and Contact Angle Influence, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 142, pp. 361–373, 1998.
   Web of Science ®Google Scholar
• V.S. Nikolayev and D.A. Beysens. Boiling Crisis and Non-Equilibrium Drying Transition, Europhysics Letters, Vol. 47, No. 3, pp. 345–351, 1999.
   Google Scholar
• V. Janecek and V.S. Nikolayev. Apparent-Contact-Angle Model at Partial Wetting and Evaporation: Impact of Surface Forces, Physical Review E, Vol. 87, p. 012404, 2013.
   Web of Science ®Google Scholar
• R. Raj, C. Kunkelmann, P. Stephan, J. Plawsky, and J. Kim. Contact Line Behavior for a Highly Wetting Fluid under Superheated Conditions, International Journal of Heat and Mass Transfer, Vol. 55, pp. 2664–2675, 2012.
   Web of Science ®Google Scholar
• V.S. Ajaev, T. Gambaryan-Roisman, and P. Stephan. Static and Dynamic Contact Angles of Evaporating Liquids on Heated Surfaces, Journal of Colloid and Interface Science, Vol. 342, pp. 550–558, 2010.
   PubMed Web of Science ®Google Scholar
• A. Zou and S.C. Maroo. Critical Height of Micro/Nano Structures for Pool Boiling Heat Transfer Enhancement, Applied Physics Letters, Vol. 103, p. 221602, 2013.
   Web of Science ®Google Scholar
• T.G. Theofanous, J.P. Tu, A.P. Dinh, and T.N. Dinh. The Boiling Crisis Phenomenon: Part I: Nucleation and Nucleate Boiling Heat Transfer, Experimental Thermal and Fluid Science, Vol. 26, Nos. 6–7, pp. 775–792, 2002.
   Web of Science ®Google Scholar
• T.G. Theofanous, J.P. Tu, A.P. Dinh, and T.N. Dinh. The Boiling Crisis Phenomenon: Part I: Part II: Dryout Dynamics and Burnout, Experimental Thermal and Fluid Science, Vol. 26, Nos. 6–7, pp. 793–810, 2002.
   Web of Science ®Google Scholar
• A.Y. Rednikov and P. Colinet. Truncated versus Extended Microfilms at a Vapor–Liquid Contact Line on a Heated Substrate, Langmuir, Vol. 27, No. 5, pp. 1758–1769, 2011.
   PubMed Web of Science ®Google Scholar
• I.-C. Chu, H.C. No, and C.-H. Song. Visualization of Boiling Structure and Critical Heat Flux Phenomenon for a Narrow Heating Surface in a Horizontal Pool of Saturated Water, International Journal of Heat and Mass Transfer, Vol. 62, pp. 142–152, 2013.
   Web of Science ®Google Scholar
• H.J. Chung and H.C. No. A Nucleate Boiling Limitation Model for the Prediction of Pool Boiling CHF, International Journal of Heat and Mass Transfer, Vol. 50, pp. 2944–2951, 2007.
   Web of Science ®Google Scholar
• C. Gerardi, J. Buongiorno, L.-W. Hu, and T. McKrell. Infrared Thermometry Study of Nanofluid Pool Boiling Phenomena, Nanoscale Research Letters, Vol. 6, pp. 232, 2011.
   PubMed Web of Science ®Google Scholar
• D. Cooke and S.G. Kandlikar. Pool Boiling Heat Transfer and Bubble Dynamics over Plain and Enhanced Microchannels, Journal of Heat Transfer, Vol. 133, p. 052902: 1–9, 2011.
   Web of Science ®Google Scholar
• D. Cooke and S.G. Kandlikar. Effect of Open Microchannel Geometry on Pool Boiling Enhancement, International Journal of Heat and Mass Transfer, Vol. 55, pp. 1004–1013, 2012.
   Web of Science ®Google Scholar
• J.S. Mehta and S.G. Kandlikar. Pool Boiling Heat Transfer Enhancement Over Cylindrical Tubes with Water at Atmospheric Pressure, Part I: Experimental Results for Circumferential Rectangular Open Microchannels, International Journal of Heat and Mass Transfer, Vol. 64, pp. 1205–1215, 2013.
   Web of Science ®Google Scholar
• J.S. Mehta and S.G. Kandlikar. Pool Boiling Heat Transfer Enhancement over Cylindrical Tubes with Water at Atmospheric Pressure, Part II: Experimental Results and Bubble Dynamics for Circumferential V-Groove and Axial Rectangular Open Microchannels, International Journal of Heat and Mass Transfer, Vol. 64, pp. 1216–1225, 2013.
   Web of Science ®Google Scholar
• S.G. Kandlikar. Controlling Bubble Motion over Heated Surface through Evaporation Momentum Force to Enhance Pool Boiling Heat Transfer, Applied Physics Letters, Vol. 102, pp. 051611, 2013.
   Web of Science ®Google Scholar
• E.G. Colgan, B. Furman, M. Gaynes, W. Graham, N. Labianca, J.H. Magerlein, R.J. Polastre, M.B. Rothwell, R.J. Bezama, R. Choudhary, K. Marston, H. Toy, J. Wakil, J. Zitz, and R. Schmidt. A Practical Implementation of Silicon Microchannel Coolers for High Power Chips, Proceedings of the 21st Annual IEEE Semiconductor Thermal Measurement and Management Symposium, San Jose, CA, March 15–17, 2005.
   Google Scholar
• Y.P. Peles, A. Kosar, C. Mishra, C.-J. Kuo, and B. Schneider. Forced Convective Heat Transfer across a Pin Fin Micro Heat Sink, International Journal of Heat and Mass Transfer, Vol. 48, No. 17, pp. 3615–3627, 2005.
   Web of Science ®Google Scholar
• M.E. Steinke and S.G. Kandlikar. An Experimental Investigation of Flow Boiling Characteristics of Water in Parallel Microchannels, Journal of Heat Transfer, Vol. 126, pp. 518–526, 2004.
   Web of Science ®Google Scholar
• S. Szczukiewicz, N. Borhani, and J.R. Thome. Two-Phase Heat Transfer and High-Speed Visualization of Refrigerant Flows in 100 × 100 μm2 Silicon Multi-Microchannels, International Journal of Refrigeration, Vol. 36, pp. 402–413, 2013.
   Web of Science ®Google Scholar
• S. Szczukiewicz, N. Borhani, and J.R. Thome. Fine-Resolution Two-Phase Flow Heat Transfer Coefficient Measurements of Refrigerants in Multi-Microchannel Evaporators, International Journal of Heat and Mass Transfer, Vol. 67, pp. 913–929, 2013.
   Web of Science ®Google Scholar
• S.S. Bertsch, E.A. Groll, and S.V. Garimella. A Composite Heat Transfer Correlation for Saturated Flow Boiling in Small Channels, International Journal of Heat and Mass Transfer, Vol. 52, pp. 2110–2118, 2009.
   Web of Science ®Google Scholar
• E. Costa-Patry and J.R. Thome. Flow Pattern–Based Flow Boiling Heat Transfer Model for Microchannels, International Journal of Refrigeration, Vol. 36, pp. 414–420, 2013.
   Web of Science ®Google Scholar
• J.R. Thome, V. Dupont, and A.M. Jacobi. Heat Transfer Model for Evaporation in Microchannels. Part I: Presentation of the Model, International Journal of Heat and Mass Transfer, Vol. 47, pp. 3375–3385, 2004.
   Web of Science ®Google Scholar
• A. Cioncolini and J.R. Thome. Algebraic Turbulence Modeling in Adiabatic and Evaporating Annular Two-Phase Flow, International Journal of Heat and Fluid Flow, Vol. 32, pp. 805–817, 2011.
   Web of Science ®Google Scholar
• S.G. Kandlikar, D.A. Willistein, and J. Borrelli. Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels, Proceedings of the Third International Conference on Microchannels and Minichannels, Toronto, ON, Canada, June 13–15, 2005.
   Google Scholar
• S.G. Kandlikar, W.K. Kuan, D.A. Willistein, J. Borrelli. Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites, Journal of Heat Transfer, Vol. 27, No. 1, pp. 4–13, 2006.
   Google Scholar
• A. Kosar, C.-J. Kuo, and Y. Peles. Boiling Heat Transfer in Rectangular Microchannels with Reentrant Cavities, International Journal of Heat and Mass Transfer, Vol. 48, pp. 4867–4886, 2005.
   Web of Science ®Google Scholar
• A. Kosar, C.-J. Kuo, and Y. Peles. Suppression of Boiling of Flow Oscillations in Parallel Microchannels by Inlet Restrictors, Journal of Heat Transfer, Vol. 128, pp. 251–260, 2006.
   Web of Science ®Google Scholar
• Y. Peles. Contemporary Perspectives on Flow Boiling Instabilities in Microchannels and Minichannels, Begell House, Redding, CT, 2012.
   Google Scholar
• F. Yang, X. Dai, and C. Li. High Frequency Microbubble-Switched Oscillations Modulated by Microfluidic Transistors, Applied Physics Letters, Vol. 101, No. 7, pp. 073509, 2012.
   Web of Science ®Google Scholar
• F. Yang, X. Dai, C.-J. Kuo, Y. Peles, L. Khan, and C. Li. Enhanced Flow Boiling in Microchannels by Self-Sustained High Frequency Two-Phase Oscillations, International Journal of Heat and Mass Transfer, Vol. 58, Nos. 1–2, pp. 402–412, 2013.
   Web of Science ®Google Scholar
• F. Yang, X. Dai, Y. Peles, P. Cheng, and C. Li. Can Multiple Flow Boiling Regimes Be Reduced into a Single one in Microchannels? Applied Physics Letters, Vol. 103, pp. 043122–043125, 2013.
   Web of Science ®Google Scholar
• F. Yang, X. Dai, Y. Peles, P. Cheng, J. Khan, and C. Li. Flow Boiling Phenomena in a Single Annular Flow Regime in Microchannels (I): Characterization of Flow Boiling Heat Transfer, International Journal of Heat and Mass Transfer, Vol. 68, pp. 703–715, 2014.
   Web of Science ®Google Scholar
• F. Yang, X. Dai, Y. Peles, P. Cheng, J. Khan, and C. Li. Flow Boiling Phenomena in a Single Annular Flow Regime in Microchannels (II): Reduced Pressure Drop and Enhanced Critical Heat Flux, International Journal of Heat and Mass Transfer, Vol. 68, pp. 716–724, 2014.
   Web of Science ®Google Scholar
• A.K.M.M. Morshed, F. Yang, M. Yakut Ali, J. Khan, and C. Li. Enhanced Flow Boiling in a Microchannel with Integration of Nanowires, Applied Thermal Engineering, Vol. 32, pp. 68–75, 2012.
   Web of Science ®Google Scholar
• D. Li, G.S. Wu, W. Wang, Y.D. Wang, D. Liu, D.C. Zhang, Y.F. Chen, G.P. Peterson, and R. Yang. Enhancing Flow Boiling Heat Transfer in Microchannels for Thermal Management with Monolithically-Integrated Silicon Nanowires, Nano Letters, Vol. 12, No. 7, pp. 3385–3390, 2012.
   Google Scholar
• M.E., Steinke and S.G. Kandlikar. Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels, ASME Fourth International Conference on Nanochannels, Microchannels and Minichannels, Limerick, Ireland, June 19–21, 2006.
   Google Scholar
• A. Mukherjee and S.G. Kandlikar. Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels, Proceedings of the 3rd International Conference on Microchannels and Minichannels, Toronto, ON, Canada, June 13–15, 2005, 2005.
   Google Scholar
• C.T. Lu and C. Pan. A Highly Stable Microchannel Heat Sink for Convective Boiling, Journal of Micromechanics and Microengineering, Vol. 19, p. 055013, 2009.
   Web of Science ®Google Scholar
• K. Balasubramanian, P.S. Lee, L.W. Jin, S.K. Chou, C.J. Teo, and S. Gao. Experimental Investigations of Flow Boiling Heat Transfer and Pressure Drop in Straight and Expanding Microchannels—A Comparative Study, International Journal of Thermal Sciences, Vol. 50, pp. 2413–2421, 2011.
   Web of Science ®Google Scholar
• S.G. Kandlikar, T. Widger, A. Kalani, and V. Mejia. Enhanced Flow Boiling over Open Microchannels with Uniform and Tapered Gap Manifolds, Journal of Heat Transfer, Vol. 135, pp. 061401, 2013.
   Web of Science ®Google Scholar
• G. Anjos, N. Mangiavacchi, N. Borhani, and J.R. Thome. 3D ALE Finite Element Method for Two-Phase Flows with Phase Change, Heat Transfer Engineering, 35(5): 537–547, 2013.
   Web of Science ®Google Scholar
• M. Magnini, B. Pulvirenti, and J.R. Thome. Numerical Investigation of the Influence of Leading and Sequential Bubbles on Slug Flow Boiling within a Microchannel, International Journal of Thermal Sciences, Vol. 71, pp. 36–52, 2013.
   Web of Science ®Google Scholar
• S. Mukherjee and I. Mudawar. Pumpless Loop for Narrow Channel and Micro-Channel Boiling, Journal of Electronic Packaging, Vol. 125, pp. 431–441, 2003.
   Web of Science ®Google Scholar
• X. Geng, H. Yuan, H.N. Oguz, and A. Prosperetti. Bubble-Based Micropump for Electrically Conducting Liquids, Journal of Micromechanics and Microenginering, Vol. 11, pp. 270–276, 2001.
   Web of Science ®Google Scholar
• H. Linke, B. Aleman, L. Melling, M. Taormina, M. Francis, C. Dow-Hygelund, V. Narayanan, R.P. Taylor, and A. Stout. Self-Propelled Leidenfrost Droplets, Physical Review Letters, Vol. 96, p. 154502, 2006.
   PubMed Web of Science ®Google Scholar
• G. Lagubeau, M. Le Merrer, C. Clanet, and D. Quéré. Leidenfrost on a Ratchet, Nature Physics, Vol. 7, pp. 395–398, 2011.
   Web of Science ®Google Scholar
• N. Thiagarajan, F. Kapsenberg, V. Narayanan, S.H. Bhavnani, and C.D. Ellis. Development of a Heat Sink with Periodic Asymmetric Structures Using Gray-Scale Lithography and Deep Reactive Ion Etching, IEEE Electron Device Letters, Vol. 33, No. 7, pp. 1054–1056, 2012.
   Web of Science ®Google Scholar
• F., Kapsenberg, L. Strid, N. Thiagarajan, V. Narayanan, and S. H. Bhavnani. On the Lateral Fluid Motion during Pool Boiling via Preferentially Located Cavities, Applied Physics Letters, Vol. 104, No. 15, p. 154105, 2014.
   Google Scholar
• H. Kim, Y. Park, and J. Buongiorno. Measurement of Wetted Area Fraction in Subcooled Pool Boiling of Water Using Infrared Thermography, Nuclear Engineering and Design, Vol. 264, pp. 103–110, 2013.
   Web of Science ®Google Scholar
• J. Jung, S.J. Kim, and J. Kim. Observations of the Critical Heat Flux Process during Pool Boiling of FC-72, Journal of Heat Transfer, Vol. 136, p. 041501, 2014.
   Web of Science ®Google Scholar
• A.E. Bergles. Enhancement of Pool Boiling, International Journal of Refrigeration, Vol. 20, No. 8, pp. 545–551, 1997.
   Web of Science ®Google Scholar