Selective Doping of Conjugated Block Copolymer for Organic Thermoelectric Applications

References

• R. H. Friend, et al., “Electroluminescence in conjugated polymers,” Nature, vol. 397, pp. 121, 1999. DOI: 10.1038/16393.
   Web of Science ®Google Scholar
• M. Pope and C. E. Swenberg, Electronic Processes in Organic Crystals and Polymers. New York: Oxford University Press, 1999.
   Google Scholar
• N. Dubey and M. Leclerc, “Conducting polymers: efficient thermoelectric materials,” J. Polym. Sci, vol. 49, pp. 467, 2011. DOI: 10.1002/polb.22206.
   Web of Science ®Google Scholar
• O. Bubnova, et al., “Metamaterials: neither solid nor liquid,” Nat. Mater, vol. 10, pp. 429, 2011. DOI: 10.1038/nmat3084.
   PubMed Web of Science ®Google Scholar
• F. Huewe, et al., “Semiconducting nanowire-based optoelectronic fibers,” Adv. Mater, vol. 29, pp. 1605682, 2017. DOI: 10.1002/adma.201700681.
   Web of Science ®Google Scholar
• Y. Zou, D. Huang, Q. Meng, C. A. Di, and D. Zhu, “Correlation between Seebeck coefficient and transport energy level in poly(3-hexylthiophene),” Organic. Electronics, vol. 56, pp. 125, 2018. DOI: 10.1016/j.orgel.2018.02.008.
   Web of Science ®Google Scholar
• D. T. Duong, C. Wang, E. Antono, M. F. Toney, and A. Salleo, “The chemical and structural origin of efficient p-type doping in P3HT,” Organic. Electronics, vol. 14, pp. 1330, 2013. DOI: 10.1016/j.orgel.2013.02.028.
   Web of Science ®Google Scholar
• C. Wang, D. T. Duong, K. Vandewal, J. Rivnay, and A. Salleo, “Optical measurement of doping efficiency in poly(3-hexylthiophene) solutions and thin films,” Phys. Rev. B, vol. 91, pp. 085205, 2015. DOI: 10.1103/PhysRevB.91.085205.
   Web of Science ®Google Scholar
• S. Y. Ku, et al., “A modular strategy for fully conjugated donor–acceptor block copolymers,” J. Am. Chem. Soc, vol. 134, no. 38, pp.16040, 2012. DOI: 10.1021/ja307431k.
   PubMed Web of Science ®Google Scholar
• A. Sussman, “Electrical properties of copper phthalocyanine thin films as influenced by the ambient,” J. Appl. Phys, vol. 38, pp. 2748, 1967. DOI: 10.1063/1.1709999.
   Web of Science ®Google Scholar
• A. Twarowski, “Oxygen doping of zinc phthalocyanine thin films,” J. Chem. Phys, vol. 77, pp. 5840, 1982. DOI: 10.1063/1.443744.
   Web of Science ®Google Scholar
• Y. Xuan, et al., “Thermoelectric properties of conducting polymers: the case of poly(3-hexylthiophene),” Phys. Rev. B, vol. 82, pp. 115454, 2010. DOI: 10.1103/PhysRevB.82.115454.
   Web of Science ®Google Scholar
• C. T. Hong, et al., “Synthesis and protein incorporation of azido-modified unnatural amino acids,” RSC Adv, vol. 5, pp. 11385, 2015. DOI: 10.1039/C4RA14244F.
   Web of Science ®Google Scholar
• W. Gao and A. Kahn, “Electronic structure and current injection in zinc phthalocyanine doped with tetrafluorotetracyanoquinodimethane: interface versus bulk effects,” Org. Electron, vol. 3, pp. 53, 2002. DOI: 10.1016/S1566-1199(02)00033-2.
   Web of Science ®Google Scholar
• J. Wu, et al., “An ultraviolet responsive hybrid solar cell based on titania/poly(3-hexylthiophene),” Sci. Rep, vol. 3, pp. 1283, 2013. DOI: 10.1038/srep01283.
   PubMed Web of Science ®Google Scholar
• M. Pfeiffer, et al., “Controlled p-doping of pigment layers by cosublimation: basic mechanisms and implications for their use in organic photovoltaic cells,” Sol. Energ. Mat. Sol. Cells, vol. 63, pp. 83, 2000. DOI: 10.1016/S0927-0248(00)00022-2.
   Web of Science ®Google Scholar
• J. Sun, et al., “Simultaneous increase in seebeck coefficient and conductivity in a doped poly(alkylthiophene) blend with defined density of states,” Macromolecules, vol. 43, pp. 2897, 2010. DOI: 10.1021/ma902467k.
   Web of Science ®Google Scholar
• I. Salzmann, G. Heimel, M. Oehzelt, S. Winkler, and N. Koch, “Molecular electrical doping of organic semiconductors: fundamental mechanisms and emerging dopant design rules,” Acc. Chem. Res, vol. 49, pp. 370, 2016. DOI: 10.1021/acs.accounts.5b00438.
   PubMed Web of Science ®Google Scholar
• M. Hiramoto, Y. Kishigami, and M. Yokoyama, “Doping effect on the two-layer organic solar cell,” Chem. Lett, vol. 1, pp. 119, 1990. DOI: 10.1246/cl.1990.119.
   Google Scholar
• P. Wei, J. H. Oh, G. Dong, and Z. Bao, “Use of a 1H-Benzoimidazole derivative as an n-type dopant and to enable air-stable solution-processed n-channel organic thin-film transistors,” J. Am. Chem. Soc, vol. 132, pp. 8852, 2010. DOI: 10.1021/ja103173m.
   PubMed Web of Science ®Google Scholar
• S. Kumar, et al., “Sequential electronic and structural transitions in VO2 observed using X-ray absorption spectromicroscopy,” Adv. Mater, vol. 26, pp. 7505–7509, 2014. DOI: 10.1002/adma.201402404.
   PubMed Web of Science ®Google Scholar
• K. Shi, et al., “Toward high performance n -Type thermoelectric materials by rational modification of BDPPV backbones,” J. Am. Chem. Soc, vol. 137, pp. 6979, 2015. DOI: 10.1021/jacs.5b00945.
   PubMed Web of Science ®Google Scholar
• X.-Q. Zhu, M.-T. Zhang, A. Yu, C.-H. Wang, and J.-P. Cheng, “Hydride, hydrogen atom, proton, and electron transfer driving forces of various five-membered heterocyclic organic hydrides and their reaction intermediates in acetonitrile,” J. Am. Chem. Soc, vol. 130, pp. 2501, 2008. DOI: 10.1021/ja075523m.
   PubMed Web of Science ®Google Scholar
• H. Méndez, et al., “Charge-transfer crystallites as molecular electrical dopants,” Nat. Commun, vol. 6, pp. 8560, 2015. DOI: 10.1038/ncomms9560.
   PubMed Web of Science ®Google Scholar
• D. Trefz, et al., “Electrochemical investigations of the N-Type semiconducting polymer P(NDI2OD-T2) and its monomer: new insights in the reduction behavior,” J. Phys. Chem. C, vol. 119, pp. 22760, 2015. DOI: 10.1021/acs.jpcc.5b05756.
   Web of Science ®Google Scholar
• K. Szendrei, D. Jarzab, Z. Chen, A. Facchetti, and M. A. Loi, “Ambipolar all-polymer bulk heterojunction field-effect transistors,” J. Mater. Chem, vol. 20, pp. 1317, 2010. DOI: 10.1039/B919596C.
   Web of Science ®Google Scholar
• M. Caironi, et al., “Very low degree of energetic disorder as the origin of high mobility in an n-channel polymer semiconductor,” Adv. Funct. Mater, vol. 21, pp. 3371, 2011. DOI: 10.1002/adfm.201100592.
   Web of Science ®Google Scholar
• P. Pingel and D. Neher, “Comprehensive picture of p -type doping of P3HT with the molecular acceptor F 4 TCNQ,” Physical Review B, vol. 87, pp. 115209, 2013. DOI: 10.1103/PhysRevB.87.115209.
   Web of Science ®Google Scholar
• I. E. Jacobs and A. J. Moulé, “Semiconducting nanowire-based optoelectronic fibers,” Adv. Mater, vol. 29, pp. 1703063, 2017. DOI: 10.1002/adma.201700681.
   Web of Science ®Google Scholar
• D. T. Scholes, et al., “Issues for conjugated polymers doped with F 4 TCNQ by solution sequential processing: hall effect, structural, and optical measurements,” J. Phys. Chem. Lett, vol. 6, pp. 4786, 2015. DOI: 10.1021/acs.jpclett.5b02332.
   PubMed Web of Science ®Google Scholar
• A. Hamidi-Sakr, et al., “A versatile method to fabricate highly in-plane aligned conducting polymer films with anisotropic charge transport and thermoelectric properties: the key role of alkyl side chain layers on the doping mechanism,” Adv. Funct. Mater, vol. 27, pp. 1700173, 2017. DOI: 10.1002/adfm.v27.25.
   Web of Science ®Google Scholar
• E. H. Lim, K. A. Peterson, G. M. Su, and M. L. Chaniyc, “Thermoelectric properties of Poly(3-hexylthiophene) (P3HT) doped with 2,3,5,6-Tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F 4 TCNQ) by vapor-phase infiltration,” Chem. Mater, vol. 30, pp. 998, 2018. DOI: 10.1021/acs.chemmater.7b04849.
   Web of Science ®Google Scholar
• T. O. Poehler and H. E. Katz, “Prospects for polymer-based thermoelectrics: state of the art and theoretical analysis,” Energy Environ. Sci, vol. 5, pp. 8110, 2012. DOI: 10.1039/c2ee22124a.
   Web of Science ®Google Scholar
• D. K. Ko and C. B. Murray, “Multistrand RNA secondary structure prediction and nanostructure design including pseudoknots,” Acs. Nano, vol. 5, pp. 4810, 2011. DOI: 10.1021/nn202666w.
   PubMed Web of Science ®Google Scholar
• H. Fritzsche, “A general expression for the thermoelectric power,” Solid State Commun, vol. 9, pp. 1813, 1971. DOI: 10.1016/0038-1098(71)90096-2.
   Web of Science ®Google Scholar
• H. Sirringhaus, “Device physics of solution-processed organic field-effect transistors,” Adv. Mater, vol. 17, pp. 2411, 2005. DOI: 10.1002/(ISSN)1521-4095.
   Web of Science ®Google Scholar
• K. P. Pernstich, B., . Rössner, and B. Balogg, “Field-effect-modulated Seebeck coefficient in organic semiconductors,” Nat. Mater, vol. 7, pp. 321, 2008. DOI: 10.1038/nmat2120.
   PubMed Web of Science ®Google Scholar
• G.-H. Kim, L. Shao, K. Zhang, and K. P. Pipe, “Engineered doping of organic semiconductors for enhanced thermoelectric efficiency,” Nat. Mater, vol. 12, pp. 719, 2013. DOI: 10.1038/nmat3635.
   PubMed Web of Science ®Google Scholar
• Y. Dua, S. Z. Shenb, K. Caia, and P. S. Casey, “Research progress on polymer–inorganic thermoelectric nanocomposite materials,” Prog. Polym. Sci, vol. 37, pp. 820, 2012. DOI: 10.1016/j.progpolymsci.2011.11.003.
   Web of Science ®Google Scholar
• K.-C. Chang, et al., “The thermoelectric performance of Poly(3,4-ethylenedi oxythiophene)/Poly(4-styrenesulfonate) thin films,” J. Electron. Mater, vol. 38, pp. 1182, 2009. DOI: 10.1007/s11664-009-0821-4.
   Web of Science ®Google Scholar
• C. Liu, et al., “Thermoelectric performance of Poly(3,4-Ethylenedioxy-thiophene)/Poly(Styrenesulfonate) pellets and films,” J. Electron. Mater, vol. 40, pp. 648, 2011. DOI: 10.1007/s11664-010-1494-8.
   Web of Science ®Google Scholar
• K. C. See, et al., “Self-aligned memristor cross-point arrays fabricated with one nanoimprint lithography step,” Nano. Lett, vol. 10, pp. 4664, 2010. DOI: 10.1021/nl1017157.
   PubMed Web of Science ®Google Scholar
• J. A. Lim, et al., “Effect of pressure on electrospray characteristics,” Appl. Phys. Lett, vol. 95, pp. 233509, 2009. DOI: 10.1063/1.3258494.
   Web of Science ®Google Scholar