Publication Cover
International Journal of Architectural Heritage
Conservation, Analysis, and Restoration
Volume 13, 2019 - Issue 6
284
Views
6
CrossRef citations to date
0
Altmetric
Articles

Influence of Moisture on the Mechanical Properties of Load-Bearing Adobe Masonry Walls

, &
Pages 841-854 | Received 19 Jan 2018, Accepted 25 May 2018, Published online: 10 Sep 2018

References

  • ABNT. 1984. Tijolo maciço de solo-cimento. Determinação da resistência à compressão e da absorção d’água[Soil-cement blocks. Determination of compressive strength and water absorption]. NBR 8492. Rio de Janeiro, Brasil: Associação Brasileira de Normas Técnicas (ABNT).
  • Almeida, J. F. 2014. Aveiro: Casa desabou na Beira Mar provocando um ferido e quatro desalojados [A house collapsed in Beira Mar causing one injured and four evacuees]. Notícias de Aveiro. http://www.noticiasdeaveiro.pt/pt/31389/aveiro-casa-desabou-na-beira-mar-provocando-um-ferido-e-quatro-desalojados.
  • ARSO. 1996. Compressed earth blocks. Technical specifications for ordinary compressed earth blocks. African Regional Standard ARS 674. Nairobi, Kenya: African Regional Organization for Standardization (ARSO).
  • ASTM. 1974. E447–74. Standard test methods for compressive strength of masonry prisms. Philadelphia, United States: American Society for Testing and Materials.
  • CEN. 1999. EN 1052–1:1999 Methods of test for masonry – Part 1: Determination of compressive strength. Brussels, Belgium: European Committee for Standardization (CEN).
  • CEN. 2002. EN 1052–3:2002 methods of test for masonry – Part 3: Determination of initial shear strength. Brussels, Belgium: European Committee for Standardization (CEN).
  • CEN. 2005. EN 1996–1-1:2005 Eurocode 6: Design of masonry structures – Part 1–1: General rules for reinforced and unreinforced masonry structures. Brussels, Belgium: European Committee for Standardization (CEN).
  • CEN. 2007. EN 1015–11:2007 methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar. Brussels, Belgium: European Committee for Standardization (CEN).
  • CEN. 2011. EN 772–1:2011 methods of test for masonry units – Part 1: Determination of compressive strength. Brussels, Belgium: European Committee for Standardization (CEN).
  • CID. 2009. New Mexico earthen buildings materials code. NMAC 14.7.4: 2009 – New Mexico administrative code. Santa Fe, New Mexico, USA: Construction Industries Division (CID).
  • Clifton, J. R., and F. L. Davis. 1979. Mechanical properties of adobe – N.B.S. Technical note 966. Washington D.C., USA: U.S. Department of Commerce, National Bureau of Standards, U.S. Government Printing Office.
  • Coroado, J., H. Paiva, A. Velosa, and V. Ferreira. 2010. Characterization of renders, joint mortars, and adobes from traditional constructions in Aveiro (Portugal). International Journal of Architectural Heritage 4(2):102–14. doi:10.1080/15583050903121877.
  • Crouch, L., J. Brogdon, R. Henderson, and D. Lanham. 1998. Effect of capping technique on observed compressive strength of facing brick. The Masonry Society Journal 16(1):9–13.
  • Delgado, M. C. J., and I. C. Guerrero. 2007. The selection of soils for unstabilised earth building: A normative review. Construction and Building Materials 21:237–51. doi:10.1016/j.conbuildmat.2005.08.006.
  • Fontana, P., L. Miccoli, and U. Grünberg. 2018. Experimental investigations on the initial shear strength of masonry with earth mortars. International Journal of Masonry Research and Innovation 3(1):34–49. doi:10.1504/IJMRI.2018.089051.
  • HABITERRA. 1995. Recomendaciones para la elaboración de normas técnicas de edificaciones de adobe, tapial, ladrillos y bloques de suelo-cemento[Recommendations for the elaboration of technical standards for constructions of adobe, rammed earth, bricks and soil-cement blocks]. La Paz, Bolivia: CYTED.
  • Heath, A., D. Maskell, P. Walker, M. Lawrence, and C. Fourie. 2012. Modern earth masonry: Structural properties and structural design. The Structural Engineer 90(4):38–44.
  • Houben, H., and H. Guillaud. 1994. Earth construction: A comprehensive guide. London: ITDG Publishing.
  • IETCC. 1971. Obras de Fábrica. Prescripciones del Instituto Eduardo Torroja [Masonry works. Prescriptions of the Eduardo Torroja Institute]. P.I.E.T. 70. Madrid, Spain: Instituto Eduardo Torroja de la Construcción y del Cemento (IETCC).
  • Illampas, R., I. Ioannou, and D. C. Charmpis. 2014. Adobe bricks under compression: Experimental investigation and derivation of stress–Strain equation. Construction and Building Materials 53:83–90. doi:10.1016/j.conbuildmat.2013.11.103.
  • Lumantarna, R., D. T. Biggs, and J. M. Ingham. 2014. Uniaxial compressive strength and stiffness of field extracted and laboratory constructed masonry prisms. ASCE Journal of Materials in Civil Engineering 26(4):567–75. doi:10.1061/(ASCE)MT.1943-5533.0000731.
  • Martín-Caro, J. A. 2001. Análisis estructural de puentes arco de fábrica: Criterios de comprobación [Structural analysis of masonry arch bridges: Verification criteria]. Ph.D. thesis, Technical University of Madrid, Madrid.
  • Martínez, J. L. 2003. Determinación teórica y experimental de diagramas de interacción de esfuerzos en estructuras de fábrica y aplicación al análisis de construcciones históricas [Theoretical and experimental determination of force interaction diagrams in masonry structures and application to the assessement of ancient constructions]. Ph.D. thesis, Technical University of Madrid, Madrid.
  • Martins, L. 2011. Desenvolvimento de ferramenta de cálculo para uma avaliação expedita de estruturas de alvenaria antiga de pedra [Development of a calculation tool for an expedite assessment of old stone masonry structures]. M.S. Thesis, Polytechnic Institute of Viseu, Viseu.
  • Martins, T., J. Fernández-Gómez, and H. Varum. 2016. Caracterização do estado atual do parque edificado em adobe da cidade de Aveiro [Characterization of the current state of adobe buildings in Aveiro]. Paper presented at the XII International Conference on Structural Repair and Rehabilitation – CINPAR 2016, Porto, Portugal, October 27.
  • McNary, W. S., and D. P. Abrams. 1985. Mechanics of masonry in compression. Journal of Structural Engineering 111(4):857–70. doi:10.1061/(ASCE)0733-9445(1985)111:4(857).
  • Miccoli, L., A. Garofano, P. Fontana, and U. Müller. 2015. Experimental testing and finite element modelling of earth block masonry. Engineering Structures 104:80–94. doi:10.1016/j.engstruct.2015.09.020.
  • Miccoli, L., U. Müller, and P. Fontana. 2014. Mechanical behaviour of earthen materials: A comparison between earth block masonry, rammed earth and cob. Construction and Building Materials 61:327–39. doi:10.1016/j.conbuildmat.2014.03.009.
  • Mohamad, G., P. B. Lourenço, and H. R. Roman. 2007. Mechanics of hollow concrete block masonry prisms under compression: Review and prospects. Cement and Concrete Composites 29(3):181–92. doi:10.1016/j.cemconcomp.2006.11.003.
  • MOPT. 1992. Bases para el diseño y construcción con tapial [Bases for the design and construction with rammed earth]. MOPT 1992. Madrid, Spain: Centro de Publicaciones, Secretaria General Técnica, Ministerio de Obras Públicas y Transportes (MOPT).
  • Müller, P., L. Miccoli, P. Fontana, and C. Ziegert. 2017. Development of partial safety factors for earth block masonry. Materials and Structures 50(1):31. doi:10.1617/s11527-016-0902-9.
  • Oliveira, E., and F. Galhano. 2000. Arquitectura tradicional Portuguesa [Traditional Portuguese architecture]. Lisbon: Publicações D. Quixote.
  • Rodrigues, P. 2007. Construções em terra crua [Raw earth constructions]. Tecnologias, potencialidades e patologias. Revista Musa 2:149–55.
  • Ruano, A., C. A. Tavares, and H. Varum 2010a. A fase de transição do sistema construtivo contemporâneo do Movimento Moderno, 6◦ATP/9◦SIACOT, Seminário Ibero-Americano de Construção e Arquitectura com Terra, Coimbra, Portugal.
  • Ruano, A., C. A. Tavares, and H. Varum. 2010b. Evolução do sistema construtivo de adobe na Fábrica de Porcelanas da Vista Alegre (1937–1945). Revista Conservar Património, 49–69. Portugal: ARP–Associação Profissional de Conservadores Restauradores de Portugal.
  • SA. 2002. The Australian earth building handbook. HB 195. Sydney, Australia: Standards Australia (SA).
  • Samali, B., D. M. Dowling, and J. Li. 2008. Static and dynamic testing of adobe-mud brick structures. Australian Journal of Structural Engineering 8(2):159–65. doi:10.1080/13287982.2008.11464995.
  • Santiago, L. 2007. A Casa Gandaresa do Distrito de Aveiro. Contributo para a sua reabilitação como património cultural [The Gandaresa House of Aveiro District. Contribution to its rehabilitation as a cultural heritage]. M.S. thesis, University of Évora, Évora.
  • Sarrico, P. 2014. Caracterização mecânica de paredes e construções de alvenaria de adobe [Mechanical characterization of adobe masonry walls and constructions]. M.S. Thesis, University of Aveiro, Aveiro.
  • SENCICO. 2006. Reglamento nacional de construcciones. Norma técnica de edificación NTE E 0.80 Adobe. Lima, Peru: Servicio nacional de capacitación para la Industria de la Construcción (SENCICO).
  • Silveira, D., H. Varum, and A. Costa. 2013. Influence of the testing procedures in the mechanical characterization of adobe bricks. Construction and Building Materials 40:719–28. doi:10.1016/j.conbuildmat.2012.11.058.
  • Silveira, D., H. Varum, A. Costa, and J. Carvalho. 2015. Mechanical properties and behavior of traditional adobe wall panels of the Aveiro district. Journal of Materials in Civil Engineering 27(9):04014253. doi:10.1061/(ASCE)MT.1943-5533.0001194.
  • Silveira, D., H. Varum, A. Costa, T. Martins, H. Pereira, and J. Almeida. 2012. Mechanical properties of adobe bricks in ancient constructions. Construction and Building Materials 28:36–44. doi:10.1016/j.conbuildmat.2011.08.046.
  • Singh, S. B., and P. Munjal. 2017. Bond strength and compressive stress-strain characteristics of brick masonry. Journal of Building Engineering 9:10–16. doi:10.1016/j.jobe.2016.11.006.
  • SNZ. 1998a. Engineering design of earth buildings. NZS 4297. Wellington, New Zealand: Standards New Zealand (SNZ).
  • SNZ. 1998b. Materials and workmanship for earth buildings. NZS 4298. Wellington, New Zealand: Standards New Zealand (SNZ).
  • SNZ. 1999. Earth buildings not requiring specific design. NZS 4299. Wellington, New Zealand: Standards New Zealand (SNZ).
  • Varum, H., A. Figueiredo, D. Silveira, T. Martins, and A. Costa. 2011. Outputs from the research developed at the University of Aveiro regarding the mechanical characterization of existing adobe constructions in Portugal. Informes De La Construcción 63(523):127–42. doi:10.3989/ic.10.016.
  • Vermeltfoort, A. T. 1994. Compression properties of masonry and its components. In Proceedings of the 10th International Brick and Block Masonry Conference (IB2MAC), 1433–42. Calgary, Canada.
  • Wu, F., G. Li, H. Li, and J. Jia. 2013. Strength and stress–Strain characteristics of traditional adobe block and masonry. Materials and Structures 46:1449–57. doi:10.1617/s11527-012-9987-y.
  • Young-Shik, P., and S. Jin-Kook. 2008. Comparative study on compressive strength of concrete with new sand-cap and neoprene pad. Journal of the Korea Concrete Institute 2(1):15–19.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.