References
- Aguilar, R., M. F. Noel, and L. F. Ramos. 2019. Integration of reverse engineering and non-linear numerical analysis for the seismic assessment of historical adobe buildings. Automation in Construction 98:1–15. doi:https://doi.org/10.1016/j.autcon.2018.11.010.
- Azzara, R. M., G. De Roeck, M. Girardi, C. Padovani, D. Pellegrini, and E. Reynders. 2018. The influence of environmental parameters on the dynamic behaviour of the San Frediano bell tower in Lucca. Engineering Structures 156:175–87. doi:https://doi.org/10.1016/j.engstruct.2017.10.045.
- Bolton, D. 1980. The computation of equivalent potential temperature. Monthly Weather Review 108 (7):1046–53.
- Cabboi, A., C. Gentile, and A. Saisi. 2017. From continuous vibration monitoring to FEM-based damage assessment: application on a stone-masonry tower. Construction and Building Materials 156:252–65. doi:https://doi.org/10.1016/j.conbuildmat.2017.08.160.
- Cigada, A., L. Corradi Dell’Acqua, M. V. Castiglione, B. Scaccabarozzi, M. Vanali, and E. Zappa. 2017. Structural health monitoring of an historical building: The main spire of the Duomo Di Milano. International Journal of Architectural Heritage 11 (4):501–18. doi:https://doi.org/10.1080/15583058.2016.1263691.
- De Stefano, A., E. Matta, and P. Clemente. 2016. Structural health monitoring of historical heritage in Italy: some relevant experiences. Journal of Civil Structural Health Monitoring 6 (1):83–106. doi:https://doi.org/10.1007/s13349-016-0154-y.
- Elyamani, A., O. Caselles, P. Roca, and J. Clapes. 2017. Dynamic investigation of a large historical cathedral. Structural Control and Health Monitoring 24 (3):e1885. doi:https://doi.org/10.1002/stc.v24.3.
- Fan, W., and P. Qiao. 2011. Vibration-based damage identification methods: a review and comparative study. Structural Health Monitoring 10 (1):83–111. doi:https://doi.org/10.1177/1475921710365419.
- Foti, D., M. Diaferio, N. Giannoccaro, and M. Mongelli. 2012. Ambient vibration testing, dynamic identification and model updating of a historic tower. NDT & E International 47:88–95. doi:https://doi.org/10.1016/j.ndteint.2011.11.009.
- Gattulli, V., M. Lepidi, and F. Potenza. 2016. Dynamic testing and health monitoring of historic and modern civil structures in Italy. Structural Monitoring Maintenance 3 (1):71–90.
- Gentile, C., A. Saisi, and A. Cabboi. 2015. Structural identification of a masonry tower based on operational modal analysis. International Journal of Architectural Heritage 9 (2):98–110. doi:https://doi.org/10.1080/15583058.2014.951792.
- Gentile, C., M. Guidobaldi, and A. Saisi. 2016. One-year dynamic monitoring of a historic tower: damage detection under changing environment. Meccanica 51 (11):2873–89. doi:https://doi.org/10.1007/s11012-016-0482-3.
- Ivancic, S. R., C. Briceno, R. Marques, R. Aguilar, R. Perucchio, and J. Vargas. 2014. Seismic assessment of the St. Peter Apostle Church of Andahuaylillas in Cusco, Peru. SAHC2014–9th International Conference on Structural Analysis of Historical Constructions, 1–12. Mexico City.
- KINEMETRICS. 2017a. Obsidian 8x multichannel seismic recorder. https://kinemetrics.com/.
- KINEMETRICS. 2017b. EpiSensor ES-U2 uniaxial episensor accelerometer. https://kinemetrics.com/.
- Kita, A., N. Cavalagli, and F. Ubertini. 2019. Temperature effects on static and dynamic behavior of Consoli Palace in Gubbio, Italy. Mechanical Systems and Signal Processing 120:180–202. doi:https://doi.org/10.1016/j.ymssp.2018.10.021.
- Lorenzoni, F., F. Casarin, M. Caldon, K. Islami, and C. Modena. 2016. Uncertainty quantification in structural health monitoring: Applications on cultural heritage buildings. Mechanical Systems and Signal Processing 66:268–81. doi:https://doi.org/10.1016/j.ymssp.2015.04.032.
- Lorenzoni, F., M. Caldon, F. Da Porto, C. Modena, and T. Aoki. 2018. Post-earthquake controls and damage detection through structural health monitoring: applications in l’Aquila. Journal of Civil Structural Health Monitoring 8 (2):217–36. doi:https://doi.org/10.1007/s13349-018-0270-y.
- Lourenço, P. B. 2006. Recommendations for restoration of ancient buildings and the survival of a masonry chimney. Construction and Building Materials 20 (4):239–51. doi:https://doi.org/10.1016/j.conbuildmat.2005.08.026.
- Maeck, J., B. Peeters, and G. De Roeck. 2001. Damage identification on the Z24 bridge using vibration monitoring. Smart Materials and Structures 10 (3):512. doi:https://doi.org/10.1088/0964-1726/10/3/313.
- Magalhães, F., A. Cunha, and E. Caetano. 2012. Vibration based structural health monitoring of an arch bridge: from automated OMA to damage detection. Mechanical Systems and Signal Processing 28:212–28. doi:https://doi.org/10.1016/j.ymssp.2011.06.011.
- Marques, R., S. Ivancic, C. Briceño, R. Aguilar, R. Perucchio, and J. Vargas. 2014. Study on the seismic behaviour of St. Peter the Apostle Church of Andahuaylillas in Cusco, Peru. 9IMC-9th International Masonry Conference, 1–13. Guimarães, Portugal.
- Masciotta, M. G., J. C. Roque, L. F. Ramos, and P. B. Lourenço. 2016. A multidisciplinary approach to assess the health state of heritage structures: The case study of the Church of Monastery of Jerónimos in Lisbon. Construction and Building Materials 116:169–87. doi:https://doi.org/10.1016/j.conbuildmat.2016.04.146.
- Masciotta, M. G., L. F. Ramos, and P. B. Lourenço. 2017. The importance of structural monitoring as a diagnosis and control tool in the restoration process of heritage structures: a case study in Portugal. Journal of Cultural Heritage 27:36–47. doi:https://doi.org/10.1016/j.culher.2017.04.003.
- Masciotta, M.-G., L. F. Ramos, P. B. Lourenco, and M. Vasta. 2017. Damage identification and seismic vulnerability assessment of a historic masonry chimney. Annals of Geophysics 60 (4):S0442. doi:https://doi.org/10.4401/ag-7126.
- National Instrument. 2016a. DAQ NI 9234. http://www.ni.com/pdf/manuals/374238a_02.pdf.
- National Instrument. 2016b. DAQ NI 9432. http://www.ni.com/datasheet/pdf/en/ds-316.
- Noh, J., and S. Russo. 2017. Long-term dynamic monitoring of the historical masonry façade: the case of palazzo Ducale in Venice, Italy. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences 4 (2):187–93. doi:https://doi.org/10.5194/isprs-annals-IV-2-W2-187-2017.
- ONSET. 2017a. HOBO RX3000 remote monitoring station data logger. http://www.onsetcomp.com.
- ONSET. 2017b. S-THB-M008 temperature/relative humidity smart sensor. http://www.onsetcomp.com.
- ONSET. 2017c. HOBO UX100-011 data logger. http://www.onsetcomp.com.
- Peeters, B., and G. De Roeck. 1999. Reference-based stochastic subspace identification for output-only modal analysis. Mechanical Systems and Signal Processing 13 (6):855–78. doi:https://doi.org/10.1006/mssp.1999.1249.
- Peeters, B., and G. De Roeck. 2001. One-year monitoring of the Z 24-bridge: environmental effects versus damage events. Earthquake Engineering & Structural Dynamics 30 (2):149–71. doi:https://doi.org/10.1002/1096-9845(200102)30:2<149::AID-EQE1>3.0.CO;2-Z.
- Piezotronics, P. C. B. 2016. Accelerometer 393B12. http://www.pcb.com/Products.aspx?m=393B12.
- Rainieri, C., F. Magalhaes, D. Gargaro, G. Fabbrocino, and A. Cunha. 2018. Predicting the variability of natural frequencies and its causes by second-order blind identification. Structural Health Monitoring 2018:1–22.
- Ramos, L., L. Marques, P. B. Lourenço, G. De Roeck, A. Campos-Costa, and J. Roque. 2010. Monitoring historical masonry structures with operational modal analysis: two case studies. Mechanical Systems and Signal Processing 24:1291–305. doi:https://doi.org/10.1016/j.ymssp.2010.01.011.
- Ramos, L. F., R. Aguilar, P. B. Lourenço, and S. Moreira. 2013. Dynamic structural health monitoring of Saint Torcato church. Mechanical Systems and Signal Processing 35 (1–2):1–15. doi:https://doi.org/10.1016/j.ymssp.2012.09.007.
- Regni, M., D. Arezzo, S. Carbonari, F. Gara, and D. Zonta. 2018. Effect of environmental conditions on the modal response of a 10-story reinforced concrete tower. Shock and Vibration 2018:1–16. doi:https://doi.org/10.1155/2018/9476146.
- Reynders, E., and G. D. Roeck 2009. Continuous Vibration Monitoring and Progressive Damage Testing on the Z24 Bridge. In Encyclopedia of Structural Health Monitoring (eds C. Boller, F. Chang and Y. Fujino). doi: https://doi.org/10.1002/9780470061626.shm165
- Ruta del Barroco Andino. 2018. Accessed December 2018. http://rutadelbarrocoandino.com/.
- Saisi, A., and C. Gentile. 2015. Post-earthquake diagnostic investigation of a historic masonry tower. Journal of Cultural Heritage 16 (4):602–09. doi:https://doi.org/10.1016/j.culher.2014.09.002.
- Saisi, A., C. Gentile, and A. Ruccolo. 2018. Continuous monitoring of a challenging heritage tower in Monza, Italy. Journal of Civil Structural Health Monitoring 8 (1):77–90. doi:https://doi.org/10.1007/s13349-017-0260-5.
- Saisi, A., C. Gentile, and M. Guidobaldi. 2015. Post-earthquake continuous dynamic monitoring of the Gabbia Tower in Mantua, Italy. Construction and Building Materials 81:101–12. doi:https://doi.org/10.1016/j.conbuildmat.2015.02.010.
- Shan, W., X. Wang, and Y. Jiao. 2018. Modeling of temperature effect on modal frequency of concrete beam based on field monitoring data. Shock and Vibration 2018:1–13. doi:https://doi.org/10.1155/2018/8072843.
- Sohn, H. 2007. Effects of environmental and operational variability on structural health monitoring. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences 365 (1851):539–60. doi:https://doi.org/10.1098/rsta.2006.1935.
- Ubertini, F., C. Gentile, and A. L. Materazzi. 2013. Automated modal identification in operational conditions and its application to bridges. Engineering Structures 46:264–78. doi:https://doi.org/10.1016/j.engstruct.2012.07.031.
- Ubertini, F., G. Comanducci, and N. Cavalagli. 2016. Vibration-based structural health monitoring of a historic bell-tower using output-only measurements and multivariate statistical analysis. Structural Health Monitoring 15 (4):438–57. doi:https://doi.org/10.1177/1475921716643948.
- Ubertini, F., G. Comanducci, N. Cavalagli, A. L. Pisello, A. L. Materazzi, and F. Cotana. 2017. Environmental effects on natural frequencies of the San Pietro bell tower in Perugia, Italy, and their removal for structural performance assessment. Mechanical Systems and Signal Processing 82:307–22. doi:https://doi.org/10.1016/j.ymssp.2016.05.025.
- Ubertini, F., N. Cavalagli, A. Kita, and G. Comanducci. 2018. Assessment of a monumental masonry bell-tower after 2016 Central Italy seismic sequence by long-term SHM. Bulletin of Earthquake Engineering 16 (2):775–801. doi:https://doi.org/10.1007/s10518-017-0222-7.
- Zhou G.D. and T. H. Yi. 2014. A Summary Review of Correlations between Temperatures and Vibration Properties of Long-Span Bridges. Mathematical Problems in Engineering, vol. 2014. Article id 638209. 19 pages. https://doi.org/10.1155/2014/638209.
- Zonno, G., R. Aguilar, B. Castañeda, R. Boroschek, and P. B. Lourenço. 2018b. Preliminary validation of an automatic modal identification methodology for structural health monitoring of historical buildings. International Journal of Structural and Civil Engineering Research 7 (2):144–50.
- Zonno, G., R. Aguilar, R. Boroschek, and P. B. Lourenço. 2018a. Automated long-term dynamic monitoring using hierarchical clustering and adaptive modal tracking: validation and applications. Journal of Civil Structural Health Monitoring 8 (5):791–808. doi:https://doi.org/10.1007/s13349-018-0306-3.
- Zonno, G., R. Aguilar, R. Boroschek, and P. B. Lourenço. 2019a. Experimental analysis of the thermohygrometric effects on the dynamic behavior of adobe systems. Construction and Building Materials 208:158–74. doi:https://doi.org/10.1016/j.conbuildmat.2019.02.140.
- Zonno, G., R. Aguilar, R. Boroschek, and P. B. Lourenço. 2019b. Analysis of the long and short-term effects of temperature and humidity on the structural properties of adobe buildings using continuous monitoring. Engineering Structures 1:1–4.