Experimental Investigation of CFRP Strengthened Unreinforced Masonry Walls with Openings

References

• Abrams, D. P., O. AlShawa, P. B. Lourenço, and L. Sorrentino. 2017. Out-of-plane seismic response of unreinforced masonry walls: Conceptual discussion, research needs, and modeling issues. International Journal of Architectural Heritage 11 (1):22–30. doi:10.1080/15583058.2016.1238977.
   Web of Science ®Google Scholar
• ACI 440.7R. 2010. Guide for the design and construction of externally bonded FRP system for strengthening unreinforced masonry structures. Reported by ACI Committee 440. April 2010. doi:10.14359/51663675.
   Google Scholar
• Alcaino, P., and H. Santa-Maria. 2008. Experimental response of externally retrofitted masonry walls subjected to shear loading. Journal of Composites for Construction 12 (5):489–98. doi:10.1061/(asce)1090-0268(2008)12:5(489).
   Web of Science ®Google Scholar
• Ashraf, M., A. N. Khan, A. Naseer, Q. Ali, and B. Alam. 2012. Seismic behaviour of unreinforced and confined brick masonry walls before and after ferrocement overlay retrofitting. International Journal of Architectural Heritage 6 (6):665–88. doi:10.1080/15583058.2018.1497234.
   Web of Science ®Google Scholar
• ASTM C 67/C67M – 18. (2015). Standard test methods for sampling and testing brick and structural clay tile. doi:10.1520/c0067-11.
   Google Scholar
• ASTM C469. 2014. Standard test method for static modulus of elasticity and poison’s ratio of concrete in compression. doi:10.1520/c0469-94e01.
   Google Scholar
• Bahaa, T., A. Abd El-Khalik, and M. Ghoneim 2013. Behavior of unreinforced masonry walls strengthened using GFRP laminates. In Fifth International Conference on Nano-Technology in Construction.
   Google Scholar
• Bellini, A., A. Incerti, M. Bovo, and C. Mazzotti. 2018. Effectiveness of FRCM reinforcement applied to masonry walls subject to axial force and out-of-plane loads evaluated by experimental and numerical studies. International Journal of Architectural Heritage 12 (3):376–94. doi:10.1080/15583058.2017.1323246.
   Web of Science ®Google Scholar
• Bischof, P., R. Suter, E. Chatzi, and P. Lestuzzi. 2014. On the use of CFRP sheets for the seismic retrofitting of masonry walls and the influence of mechanical anchorage. Polymers 6 (7):1972–98. doi:10.3390/polym6071972.
   Web of Science ®Google Scholar
• Borri, A., G. Castori, and M. Corradi. 2011. Shear behavior of masonry panels strengthened by high strength steel cords. Construction and Building Materials 25 (2):494–503. doi:10.1016/j.conbuildmat.2010.05.014.
   Web of Science ®Google Scholar
• Corradi, M., A. Borri, G. Castori, and R. Sisti. 2014. Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids. Composites Part B: Engineering 64:33–42. doi:10.1016/j.compositesb.2014.03.022.
   Web of Science ®Google Scholar
• Doran, B., H. Orhun Koksal, S. Aktan, S. Ulukaya, D. Oktay, and N. Yuzer. 2017. In-plane shear behavior of traditional masonry walls. International Journal of Architectural Heritage 11 (2):278–91. doi:10.1080/15583058.2016.1207114.
   Web of Science ®Google Scholar
• Doran, B., N. Yuzer, S. Aktan, D. Oktay, and S. Ulukaya. 2019. Numerical modeling of traditional masonry walls strengthened with grout injection. International Journal of Architectural Heritage 1–16. doi:10.1080/15583058.2019.1618970.
   Web of Science ®Google Scholar
• ElGawady, M. 2004. Seismic in-plane behavior of URM walls upgraded with composites. PhD diss., Environnement Naturel, Architectural et Construit.
   Google Scholar
• ElGawady, M., P. Lestuzzi, and M. Badoux. 2004a. A review of conventional seismic retrofitting techniques for URM. In 13th International Brick and Block Masonry Conference, Amsterdam, July 4- 7, 2004.
   Google Scholar
• ElGawady, M., P. Lestuzzi, and M. Badoux 2004b, July. A review of retrofitting of unreinforced masonry walls using composites. In 4th International Conference on Advanced Composite Materials in Bridges and Structures. Calgary, Alberta.
   Google Scholar
• Elsamny, M. K., M. K. Abd-Elhamed, and A. A. Elmokrany. 2017. Experimental study of brick walls with opening strengthened during construction by using steel bars embedded into bed joint mortar above lintel and sill. International Journal of Engineering Research & Technology (IJERT) 6 (1).
   Google Scholar
• Elsamny, M. K., M. K. Abd-Elhamed, H. A. Ezz-Eldeen, and M. H. Mahmoud. 2017. Unreinforced brick walls with openings rehabilitated using U and L-shaped steel plates. International Journal of Engineering Trends and Technology (IJETT) 46 (2). doi: 10.14445/22315381/ijett-v46p215.
   Google Scholar
• Elsamny, M. K., H. A. Ezz-Eldeen, and A. A. Elmokrany. 2017. Strengthening of brick walls with openings during construction by steel wire mesh around openings on both sides of wall. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 14 (3):131–39. doi:10.9790/1684-140305131139.
   Google Scholar
• Elsamny, M. K., H. A. Ezz-Eldeen, and M. H. Mahmoud. 2017. Structural behavior of brick walls with openings rehabilitated with steel plates box-section and steel angles. International Journal of Scientific & Engineering Research (IJSER) 8 (4). doi: 10.14445/22315381/ijett-v46p215.
   Google Scholar
• EN 1015-11. 2003. Methods of test for mortar for masonry–Part 11: Determination of flexural and compressive strength of hardened mortar. Brussels: European Committee for Standardization. doi:10.3403/01905442u.
   Google Scholar
• EN 1015-3. 1999. Methods of test for mortar for masonry–Part 3: Determination of consistence of fresh mortar (by flow table). Brussels: European Committee for Standardization. doi:10.3403/01541440u.
   Google Scholar
• EN 771-1. 2005. Specification for masonry units – Part 1: Clay masonry units. doi:10.3403/02898967u.
   Google Scholar
• EN 772-1. 2011. Methods of test for masonry units – Part 1: Determination of compressive strength, p. 17. doi:10.3403/01784906u.
   Google Scholar
• EN-1015-2. 2002. Methods of test for mortar for masonry: Bulk sampling of mortars and preparation of test mortars. London: British Standards Institution. doi:10.3403/01541476u.
   Google Scholar
• Garbin, E., N. Galati, A. Nanni, C. Modena, and M. R. Valluzzi 2007, June. Provisional design guidelines for the strengthening of masonry structures subject to in-plane loading. In Proceedings of Tenth North American Masonry Conference, St. Louis, MO.
   Google Scholar
• Hamdy, G., T. El-Salakawy, and A. El-Gendy. 2018. Strengthening loaded masonry walls to enable making openings–experimental and numerical investigation. International Journal of Scientific & Engineering Research 9 (11).
   Google Scholar
• Holberg, A. M., and H. R. Hamilton III. 2002. Strengthening URM with GFRP composites and ductile connections. Earthquake Spectra 18 (1):63–84. doi:10.1193/1.1461376.
   Web of Science ®Google Scholar
• Italian National Research Council (CNR). 2004. Guide for the design and construction of an externally bonded FRP system for strengthening existing structures. DT200. CNR, Rome.
   Google Scholar
• Kalali, A., and M. Z. Kabir. 2012a. Experimental response of double-wythe masonry panels strengthened with glass fiber reinforced polymers subjected to diagonal compression tests. Engineering Structures 39:24–37. doi:10.1016/j.engstruct.2012.01.018.
   Web of Science ®Google Scholar
• Kalali, A., and M. Z. Kabir. 2012b. Cyclic behavior of perforated masonry walls strengthened with glass fiber reinforced polymers. Scientia Iranica 19 (2):151–65. doi:10.1016/j.scient.2012.02.011.
   Web of Science ®Google Scholar
• Lourenço, P. B., L. Avila, G. Vasconcelos, J. P. P. Alves, N. Mendes, and A. C. Costa. 2013. Experimental investigation on the seismic performance of masonry buildings using shaking table testing. Bulletin of Earthquake Engineering 11 (4):1157–90. doi:10.1007/s10518-012-9410-7.
   Web of Science ®Google Scholar
• Lourenço, P. J. B. B. 1997. Computational strategies for masonry structures. PHD diss.
   Google Scholar
• Luccioni, B., and V. C. Rougier. 2011. In-plane retrofitting of masonry panels with fibre reinforced composite materials. Construction and Building Materials 25 (4):1772–88. doi:10.1016/j.conbuildmat.2010.11.088.
   Web of Science ®Google Scholar
• Mahmood, H., and J. M. Ingham. 2011. Diagonal compression testing of FRP-retrofitted unreinforced clay brick masonry wallettes. Journal of Composites for Construction 15 (5):810–20. doi:10.1061/(ASCE)CC.1943-5614.0000209.
   Web of Science ®Google Scholar
• Marcari, G., G. Manfredi, A. Prota, and M. Pecce. 2007. In-plane shear performance of masonry panels strengthened with FRP. Composites Part B: Engineering 38 (7–8):887–901. doi:10.1016/j.compositesb.2006.11.004.
   Web of Science ®Google Scholar
• Martinelli, E., F. Perri, C. Sguazzo, and C. Faella. 2016. Cyclic shear-compression tests on masonry walls strengthened with alternative configurations of CFRP strips. Bulletin of Earthquake Engineering 14 (6):1695–720. doi:10.1007/s10518-016-9895-6.
   Web of Science ®Google Scholar
• Morbin, A. 2001. Strengthening of masonry elements with FRP composites. Report CIES, 02-23.
   Google Scholar
• Nanni, A., and J. G. Tumialan. 2003. Fiber-reinforced composites for the strengthening of masonry structures. Structural Engineering International 13 (4):271–78. doi:10.2749/101686603777964360.
   Google Scholar
• Nardone, F., A. Prota, and G. Manfredi 2008. Design criteria for FRP seismic strengthening of masonry walls. In The 14th World Conference on Earthquake Engineering, Beijing, China, October.
   Google Scholar
• Pantò, B., F. Cannizzaro, I. Caliò, and P. B. Lourenço. 2017. Numerical and experimental validation of a 3D macro-model for the in-plane and out-of-plane behavior of unreinforced masonry walls. International Journal of Architectural Heritage 11 (7):946–64. doi:10.1080/15583058.2017.1325539.
   Web of Science ®Google Scholar
• Proença, J. M., A. S. Gago, and A. Vilas Boas. 2019. Structural window frame for in-plane seismic strengthening of masonry wall buildings. International Journal of Architectural Heritage 13 (1):98–113. doi:10.1080/15583058.2018.1497234.
   Web of Science ®Google Scholar
• Prota, A., G. Manfredi, and F. Nardone. 2008. Assessment of design formulas for in-plane FRP strengthening of masonry walls. Journal of Composites for Construction 12 (6):643–49. doi:10.1061/(ASCE)1090-0268(2008)12:6(643).
   Web of Science ®Google Scholar
• Rahman, A., and T. Ueda. 2016. In-plane shear performance of masonry walls after strengthening by two different FRPs. Journal of Composites for Construction 20 (5):04016019. doi:10.1061/(ASCE)CC.1943-5614.0000661.
   Web of Science ®Google Scholar
• Santa Maria, H., P. Alcaino, and C. Luders 2006. Experimental response of masonry walls externally reinforced with carbon fiber fabrics. In Proceedings of the 8th US national conference on earthquake engineering, (pp. 18–22).
   Google Scholar
• Shariq, M., H. Abbas, H. Irtaza, and M. Qamaruddin. 2008. Influence of openings on seismic performance of masonry building walls. Building and Environment 43 (7):1232–40. doi:10.1016/j.buildenv.2007.03.005.
   Web of Science ®Google Scholar
• Stratford, T., G. Pascale, O. Manfroni, and B. Bonfiglioli. 2004. Shear strengthening masonry panels with sheet glass-fiber reinforced polymer. Journal of Composites for Construction 8 (5):434–43. doi:10.1061/(ASCE)1090-0268(2004)8:5(434).
   Web of Science ®Google Scholar
• Triantafillou, T. C. 1998. Composites: A new possibility for the shear strengthening of concrete, masonry and wood. Composites Science and Technology 58 (8):1285–95. doi:10.1016/S0266-3538(98)00017-7.
   Web of Science ®Google Scholar
• Valluzzi, M. R., D. Tinazzi, and C. Modena. 2002. Shear behavior of masonry panels strengthened by FRP laminates. Construction and Building Materials 16 (7):409–16. doi:10.1016/S0950-0618(02)00043-0.
   Web of Science ®Google Scholar
• Zhou, D., Z. Lei, and J. Wang. 2013. In-plane behavior of seismically damaged masonry walls repaired with external BFRP. Composite Structures 102:9–19. doi:10.1016/j.compstruct.2013.01.031.
   Web of Science ®Google Scholar