References
- AASHTO T 84 and ASTM C 128. 2015. Specific gravity and absorption of fine aggregate.
- ACI Committee 305. 1999. Hot weather concreting ACI manual of concrete practice Part 2: Construction practices and inspection, pavements American Concrete Institute, Farmington Hills, USA. https://www.ccaa.com.au/imis_prod/documents/Library%20Documents/CCAA%20Datasheets/CCAA-HOT-WEATHER-CONCRETING.pdf.
- Ahmadi J, Azizi H, Koohi M. 2016. Effect of zeolite on the strength and permeability of conventional concrete with different content of cement. J Concr Res. 8(2):5–18. https://www.sid.ir/en/Journal/ViewPaper.aspx?ID=539361.
- Al-Baijat H-A, Sarireh M. 2019. Concrete properties using Tripoli. Electron J Geotech Eng. 24(2):441–452.
- Al-Jabri KS, Al-Saidy AH, Taha R, Al-Kemyani AJ. 2011. Effect of using wastewater on the properties of high strength concrete. Proc Eng 14::370–376. https://www.sciencedirect.com/science/article/pii/S1877705811011234.
- Asadollahfardi G, Katebi A, Taherian P, Panahandeh A. 2019. Environmental life cycle assessment of concrete with different mixed designs. Int J Constr Manag. DOI: 10.1080/15623599.2019.1579015.
- ASTM D7263-09. 2018. e2 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens.
- ASTM C187-16. 2016. Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste, 4 (01). https://www.astm.org/Standards/C187.
- ASTM C191-19. 2019. Standard test methods for time of setting of hydraulic cement by vicat needle.
- ASTM C109/C109M-20a. 2020. Standard test method for compressive strength of hydraulic cement mortars.
- ASTM C192/C192M. 2014. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. https://www.astm.org/DATABASE.CART/HISTORICAL/C192C192M-14.htm.
- ASTM C150/C150M-19a. 2019. Standard specification for portland cement. https://www.astm.org/Standards/C150.
- ASTM C188-17. 2017. Standard test method for density of hydraulic cement.
- AS 1379. 1997. Manufacture and supply of concrete Standards Australia. https://www.ccaa.com.au/imis_prod/documents/Library%20Documents/CCAA%20Datasheets/CCAA-HOT-WEATHER-CONCRETING.pdf.
- C109/C 109M-02. 2002. Standard test method for compressive strength of hydraulic cement mortars.
- Fattuhi NI. 1988. The setting of mortar mixes subjected to different temperatures. Cem Concr Res. 18(5):669–673.
- Khan B, Ullah M. 2004. Effect of a retarding admixture on the setting time of cement pastes in hot weather. Eng Sci. 15(1):63–79.
- Kjellson KO, Wilter JR, Gjørv EV. 1990. Pore structure of plain concrete glues hydrated at various temperatures. Bond Concr Res. 20(6):112–120.
- Mansor AM, Borg RP, Hamed AMM, Gadeem MM, Saeed MM. 2018. The effects of water-cement ratio and chemical admixtures on the workability of concrete. IOP Conf Ser Mater Sci Eng. 442 (2018):012017. doi:10.1088/1757-899X/442/1/012017.
- Ministry of Public Works and Housing (MPWH). 1996. Technical Specifications for General Building, Volume (1), Civil and Architectural Works.
- Najjar MK, Figueiredo K, Evangelista ACJ, Hammad AWA, Tam VWY, Haddad A. 2019. Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design. Int J Constr Manag. DOI: 10.1080/15623599.2019.1637098.
- Namdar A. 2012. Natural minerals mixture for enhancing concrete compressive strength. Frat Int Strutt. 6(22):26–30. DOI: 10.3221/IGF-ESIS.22.04.
- Neville AM. 1995. Properties of concrete. 5th ed. Pearson Education Limited Edinburgh Gate, Harlow, Essex CM20 2JE, England, p. 676. ISBN: 978-0-273-75580-7.
- Ramachandran VS. 1996. Concrete admixtures handbook properties, science, and technology. 2nd ed. William Andrew, 31st December 1996, Park Ridge, NJ: Noyes Publications. ISBN: 9780815516545.
- Sarireh M, Al-Baijat H-A. 2019. Cement-Tripoli replacement in concrete mix. Electron J Geotech Eng. 24(2):387–394.
- Tanos U, Ibrahim JA. 1991. Hot weather concreting with hydraulic additives. Cem Concr Res. 21(2/3):345–354. https://pdfslide.net/documents/effect-of-retarding-admixture-on-setting-time-of-cement-pastes-in-hot-weather.html.
- Tayel E-H, Husam A-H. 2012. Characterization and possible industrial applications of tripoli outcrops at Al-Karak Province. Jordan J Earth Environ Sci. 4(2):63–66.
- Turuallo G. 2007. Analysis of the optimum percentage of admixture of sikament 163, which can be added into concrete mixture to achieve the maximum of concrete compression strength. J Smartek. 5(3):173–180. https://media.neliti.com/media/publications/221755-analysis-of-the-optimum-percentage-of-ad.pdf.
- United States Department of Transportation – Federal Highway Administration (USDT-FHA). 1999. www.Fhwa.dot.gov/engineering/hng20/hng23/setretrd.htm.
- Wileborn WW. 1994. Abrasives in industrial minerals and rocks, 6th ed. edited by D.D. Carr. Littleton, CO: Society of Mining, Metallurgy, and exploration Inc. p. 497–507.