References
- Bairán, J., & Marí, A. R. B. (2007). Multiaxial-coupled analysis of RC cross-sections subjected to combined forces. Engineering Structures, 29, 1722–1738.
- Buckle, I., & Jackson, A. (1981). A filamented beam element for the non-linear analysis of reinforced concrete shells with edge beams. New Zealand: Department of Civil Engineering, University of Auckland.
- CEN (2004). Eurocode 2. Design of concrete structures. Part. 1-1: General rules and rules for buildings, EN 1992-1-1. Brussels.
- Ceresa, P., Petrini, L., & Pinho, R. (2010). Flexure-shear fiber beam-column elements for modeling frame structures under seismic loading – State of the Art. Journal of Earthquake Engineering, 11, 46–88.
- Cervenka, V. (1985). Constitutive model for cracked reinforced concrete. ACI Journal, 82, 877–882.
- Chan, E. (1982). Nonlinear geometric, material and time dependent analysis of reinforced concrete shells with edge beams. Berkeley: Structural Engineering and Structural Mechanics, Department of Civil Engineering, University of California.
- Esteves, J. (2011). Structural concrete: New models for the analysis of shear critical elements. (M.Sc. thesis). Civil Engineering. Faculdade de Engenharia da Universidade do Porto, Portugal (in Portuguese).
- Ferreira, D. (2013). A model for the non-linear, time-dependent and strengthening analysis of shear critical frame concrete structures (PhD thesis). Barcelona: Department of Construction Engineering, ETSECCP, Universitat Politècnica de Catalunya.
- Ferreira, D., Bairán, J., & Marí, A. R. B. (2013). Numerical simulation of shear-strengthened RC beams. Engineering Structures, 46, 359–374.
- FIB (2010). Model Code 2010. International Federation for Structural Concrete.
- Kang, Y., & Scordelis, A. (1980). Nonlinear analysis of prestressed concrete frames. Journal of Structural Division, 106, 445–462.
- Kupfer, H., Hilsdorf, H. K., & Rusch, H. (1969). Behavior of concrete under biaxial stresses. ACI Journal, 66, 656–666.
- Marí, A. R. B. (1984). Nonlinear geometric, material and time dependent analysis of three dimensional reinforced and prestressed concrete frames. Berkeley: Structural Engineering and Structural Mechanics, Department of Civil Engineering, University of California.
- Marí, A. R. B. (2000). Numerical simulation of the segmental construction of three dimensional concrete frames. Engineering Structures, 22, 585–596.
- Mohr, S., Bairán, J., & Marí, A. R. B. (2010). A frame element model for the analysis of reinforced concrete structures under shear and bending. Engineering Structures, 32, 3936–3954.
- Navarro, J. G. (2009). Modelling RC linear elements including shear stress effects (PhD thesis). Department of Construction Engineering, Universidad Politécnica de Valencia, Valencia, Spain (in Spanish).
- Pimentel, P., Figueiras, J., & Bruhwiler, E. (2007). Numerical modelling of prestressed beams for structural examination of existing bridges. Proceedings. CMNE/CILAMCE, Porto, APMTAC.
- Saritas, A., & Filippou, F. C. (2009). Inelastic axial–flexural–shear coupling in a mixed formulation beam finite element. International Journal of Non-Linear Mechanics, 44, 913–922.
- Ulm, F., Clement, J., & Guggenberger, J. (1994). Recent advances in 3-D non-linear FE-analysis of R/C and P/C beam structures. Proceedings of ASCE Structures Congress XII. Atlanta (GA), New York, ASCE.
- Vecchio, F. J., & Collins, M. P. (1986). The modified compression-field theory for reinforced concrete elements subjected to shear. ACI Journal, 83, 1357–1417.
- Witte, F. C. (2005). DIANA user's manual – Release 9. Delft: TNO DIANA.
- Zienkiewicz, O. C., & Taylor, R. L. (2004). The finite element method. The basis (vol. 1). Barcelona: CIMNE.
- Zwicky, D., & Vogel, T. (2000). Failure tests on dismantled prestressed concrete bridge girders. Zurich: Institute of Structural Engineering IBK, Swiss Federal Institute of Technology ETH (in German).