Modelling processes related to corrosion of reinforcement in concrete: coupled 3D finite element model

References

• Andrade, C., Dı́ez, J. M., & Alonso, C. (1997). Mathematical modeling of a concrete surface “Skin Effect” on diffusion in chloride contaminated media. Advanced Cement Based Materials, 6, 39–44.10.1016/S1065-7355(97)00002-3
   Google Scholar
• Apostolopoulos, C. A., & Papadakis, V. G. (2008). Consequences of steel corrosion on the ductility properties of reinforcement bar. Construction and Building Materials, 22, 2316–2324.10.1016/j.conbuildmat.2007.10.006
   Web of Science ®Google Scholar
• Balabanić, G., Bićanić, N., & Đureković, A. (1996a). The influence of w/c ratio, concrete cover thickness and degree of water saturation on the corrosion rate of reinforcing steel in concrete. Cement and Concrete Research, 26, 761–769.10.1016/S0008-8846(96)85013-7
   Web of Science ®Google Scholar
• Balabanić, G., Bićanić, N., & Đureković, A. (1996b). Mathematical modeling of electrochemical steel corrosion in concrete. Journal of Engineering Mechanics, 122, 1113–1122.10.1061/(ASCE)0733-9399(1996)122:12(1113)
   Web of Science ®Google Scholar
• Bažant, Z. P. (1979). Physical model for steel corrosion in concrete sea structures – Theory. Journal of the Structural Division, 105, 1137–1153.
   Web of Science ®Google Scholar
• Bažant, Z. P., & Oh, B. H. (1983). Crack band theory for fracture of concrete. Materials and Structures, 93, 155–177.
   Google Scholar
• Bear, J., & Bachmat, Y. (1990). Introduction to modeling of transport phenomena in porous media (Vol. 4). Dordrecht: Springer.10.1007/978-94-009-1926-6
   Google Scholar
• Belytschko, T., Liu, W. K., & Moran, B. (2001). Nonlinear finite elements for continua and structures. Chistester: Wiley.
   Google Scholar
• Cairns, J. (1998). State of the art report on bond of corroded reinforcement (Tech Rep No. CEB-TG-2/5). Lausanne: CEB.
   Google Scholar
• Cairns, J., Plizzari, G. A., Du, Y., Law, D. W. & Franzoni, C. (2005). Mechanical properties of corrosion-damaged reinforcement. ACI Materials Journal, 102, 256–264.
   Web of Science ®Google Scholar
• Chana, P. S. (1990). A test method to establish realistic bond stresses. Magazine of Concrete Research, 42, 83–90.10.1680/macr.1990.42.151.83
   Web of Science ®Google Scholar
• Fischer, C. (2012). Auswirkungen der Bewehrungskorrosion auf den Verbund zwischen Stahl und Beton [The influence of the corrosion of steel reinforcement on the bond between steel and concrete]. Stuttgart: Universität Stuttgart.
   Google Scholar
• Glass, G. K., & Buenfeld, N. R. (1995). Chloride threshold levels for corrosion induced deterioration of steel in concrete. Chloride penetration into concrete: Proceedings of the RILEM international workshop, Saint-Remy-Les-Chevreuse, France. (pp. 429–440).
   Google Scholar
• Glass, G. K., & Buenfeld, N. R. (2000). The influence of chloride binding on the chloride induced corrosion risk in reinforced concrete. Corrosion Science, 42, 329–344.10.1016/S0010-938X(99)00083-9
   Web of Science ®Google Scholar
• Glasstone, S. (1964). An introduction to electrochemical behaviour of steel in concrete. ACI Journal, 61, 177–188.
   Google Scholar
• Ishida, T., Iqbal, P. O., & Anh, H. T. L. (2009). Modeling of chloride diffusivity coupled with non-linear binding capacity in sound and cracked concrete. Cement and Concrete Research, 39, 913–923.10.1016/j.cemconres.2009.07.014
   Web of Science ®Google Scholar
• Jacob, A. (2008). Composite bridge decks cut life cycle costs. Reinforced Plastics, 52, 30–32.
   Google Scholar
• Leech, C., Lockington, D., & Dux, P. (2003). Unsaturated diffusivity functions for concrete derived from NMR images. Materials and Structures, 36, 413–418.10.1007/BF02481067
   Web of Science ®Google Scholar
• Marsavina, L., Audenaert, K., De Schutter, G., Faur, N., & Marsavina, D. (2009). Experimental and numerical determination of the chloride penetration in cracked concrete. Construction and Building Materials, 23, 264–274.10.1016/j.conbuildmat.2007.12.015
   Web of Science ®Google Scholar
• Martin-Perez, B. (1999). Service life modelling of RC highway structures exposed to chlorides ( PhD thesis). University of Toronto, Canada.
   Google Scholar
• Ožbolt, J., Balabanić, G., & Kušter, M. (2011). 3D Numerical modelling of steel corrosion in concrete structures. Corrosion Science, 53, 4166–4177.10.1016/j.corsci.2011.08.026
   Web of Science ®Google Scholar
• Ožbolt, J., Balabanić, G., Periškić, G., & Kušter, M. (2010). Modelling the effect of damage on transport processes in concrete. Construction and Building Materials, 24, 1638–1648.10.1016/j.conbuildmat.2010.02.028
   Web of Science ®Google Scholar
• Ožbolt, J., Li, Y., & Kožar, I. (2001). Microplane model for concrete with relaxed kinematic constraint. International Journal of Solids and Structures, 38, 2683–2711.10.1016/S0020-7683(00)00177-3
   Web of Science ®Google Scholar
• Ožbolt, J., Oršanić, F., Balabanić, G., & Kušter, M. (2012). Modeling damage in concrete caused by corrosion of reinforcement: coupled 3D FE model. International Journal of Fracture, 178, 233–244.10.1007/s10704-012-9774-3
   Web of Science ®Google Scholar
• Ožbolt, J., Oršanić, F., Kušter, M., & Balabanić, G. (2012). Modelling bond resistance of corroded reinforcement. Proceedings of the International Conference Bond in Concrete, 2012, 437–444.
   Google Scholar
• Ožbolt, J., Oršanić, F., & Balabanić, G. (2014). Modeling pull-out resistance of corroded reinforcement in concrete: Coupled three-dimensional finite element model. Cement and Concrete Composites, 46, 41–55.10.1016/j.cemconcomp.2013.10.014
   Web of Science ®Google Scholar
• Page, C. L., Short, N. R., & El Tarras, A. (1981). Diffusion of chloride ions in hardened cement pastes. Cement and Concrete Research, 11, 395–406.10.1016/0008-8846(81)90111-3
   Web of Science ®Google Scholar
• Page, C. L., & Treadaway, K. W. J. (1982). Aspects of the electrochemistry of steel in concrete. Nature Publishing Group, 297, 109–115.
   Web of Science ®Google Scholar
• Saetta, A. V., Scotta, R. V., & Vitaliani, R. V. (1993). Analysis of chloride diffusion into partially saturated concrete. ACI Materials Journal, 90, 441–451.
   Web of Science ®Google Scholar
• Sandberg, P., Peterson, K., Sarensen, H., & Arup, H. (1995). Critical chloride concentrations for the onset of active reinforcement corrosion. Chloride penetration into concrete: Proceedings of the RILEM international workshop, Saint-Remy-Les-Chevreuse, France. (pp. 435–439).
   Google Scholar
• Tang, L., & Nilsson, L.-O. (1996). Service life prediction for concrete structures under seawater by a numerical approach. In C. Sjostrom (Ed.), Durability of building materials and components 7 (Vol. 1, pp. 97–106). London: E & FN Spon.
   Google Scholar
• Thomas, M. D., & Bamforth, P. B. (1999). Modelling chloride diffusion in concrete: effect of fly ash and slag. Cement and Concrete Research, 29, 487–495.10.1016/S0008-8846(98)00192-6
   Web of Science ®Google Scholar
• Tuutti, K. (1993). The effect of individual parameter on chloride induced corrosion. Chloride Penetration into Concrete Structures, 18–25.
   Google Scholar
• Wong, H. S., Zhao, Y. X., Karimi, A. R., Buenfeld, N. R., & Jin, W. L. (2010). On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion. Corrosion Science, 52, 2469–2480.10.1016/j.corsci.2010.03.025
   Web of Science ®Google Scholar
• Zhang, T., & Gjørv, O. E. (1996). Diffusion behavior of chloride ions in concrete. Cement and Concrete Research, 26, 907–917.10.1016/0008-8846(96)00069-5
   Web of Science ®Google Scholar