Fragility analysis for ballistic design

References

• Akiyama, M., Frangopol, D.M., & Matsuzaki, H. (2011). Life-cycle reliability of RC bridge piers under seismic and airborne chloride hazards. Earthquake Engineering and Structural Dynamics, 40, 1671–1687. doi:10.1002/eqe.1108
   Web of Science ®Google Scholar
• American Ordnance LLC. (2009). Mortars and mortar components. Retrieved from http://www.aollc.biz/mortars.htm
   Google Scholar
• Ang, A.H.-S., & Tang, W.H. (2007). Probability concepts in engineering: Emphasis on applications to civil and environmental engineering (2nd ed.). Hoboken: Wiley.
   Google Scholar
• Arnold, W., & Rottenkolber, E. (2008). Fragment mass distribution of metal cased explosive charges. International Journal of Impact Engineering, 35, 1393–1398. doi:10.1016/j.ijimpeng.2008.07.049
   Web of Science ®Google Scholar
• Beth, R.A. (1946). Final report of concrete penetration ( Report No. 6459). Washington, DC: Office of Scientific Research and Development.
   Google Scholar
• Chopra, A.K. (2007). Dynamics of structures: Theory and applications to earthquake engineering (3rd ed.). New York, NY: Pearson Education.
   Google Scholar
• Cornell, C.A., & Krawinkler, H. (2000). Progress and challenges in seismic performance assessment. PEER Center News. 3, 1–3. Retrieved from http://www3.nd.edu/~linbeck/Peer_NewsLetter_3-00.pdf
   Google Scholar
• Department of Defense. (2008a). Structures to resist the effects of accidental explosions ( Report No. UFC 3-340-02). Washington, DC: Author.
   Google Scholar
• Department of Defense. (2008b). Design to resist direct fire weapons effects ( Report No. UFC 4-023-07). Washington, DC: Author.
   Google Scholar
• Department of Defense. (2008c). DoD security engineering facilities planning manual ( Report No. UFC 4-020-01). Washington, DC: Author.
   Google Scholar
• Department of Defense. (2012). DoD minimum antiterrorism standards for buildings ( Report No. UFC 4-010-01). Washington, DC: Author.
   Google Scholar
• Department of Defense Explosives Safety Board. (2009). Approved methods and algorithms for DOD risk-based explosives siting ( Report No. Technical Paper 14) Washington, DC: Author.
   Google Scholar
• Elek, P., & Jaramaz, S. (2009). Fragment mass distribution of natural fragmenting warheads. Belgrade: Faculty of Mechanical Engineering Transactions.
   Google Scholar
• Enright., M.P., & Frangopol, D.M. (1998). Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion. Engineering Structures, 20, 960–971. doi:10.1016/S0141-0296(97)00190-9
   Web of Science ®Google Scholar
• Gurney, R.W. (1943). The initial velocities of fragments from bombs, shells and grenades ( Report No. 405). Aberdeen Proving Ground: Ballistic Research Laboratories.
   Google Scholar
• Karamlou, A., & Bocchini, P. (2015). Computation of bridge seismic fragility by large-scale simulation for probabilistic resilience analysis. Earthquake Engineering and Structural Dynamics, 44, 1959–1978. doi:10.1002/eqe.256
   Web of Science ®Google Scholar
• Kennedy, R.P. (1975). A review of procedures for the analysis and design of concrete structures to resist missile impact effects. Nuclear Engineering and Design, 37, 183–203. doi:10.1016/0029-5493(76)90015-7
   Web of Science ®Google Scholar
• Li, Q.M., Reid, S.R., & Ahmad-Zaidi, A.M. (2006). Critical impact energies for scabbing and perforation of concrete target. Nuclear Engineering and Design, 236, 1140–1148. doi:10.1016/j.nucengdes.2005.10.017
   Web of Science ®Google Scholar
• Li, Q.M., Reid, S.R., Wen, H.M., & Telford, A.R. (2005). Local impact effects of hard missiles on concrete targets. International Journal of Impact Engineering, 32, 224–284. doi:10.1016/j.ijimpeng.2005.04.005
   Web of Science ®Google Scholar
• Luco, N., & Cornell, C.A. (2000). Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions. Earthquake Spectra, 23, 357–392. doi:10.1193/1.2723158
   Web of Science ®Google Scholar
• Magee, L., Oats, A., & Courtney, M. (2012). Comparing measured bullet weight with manufacturer specifications. Report No. 0704-0188. DFRL U.S. Air Force Academy.
   Google Scholar
• Naito, C., Olmati, P., Trasborg, P., Davidson, J., & Newberry, C. (2014). Assessment of insulated concrete walls to close-in blast demands. Journal of Performance of Constructed Facilities, 29(6), 1–10. doi:10.1061/(ASCE)CF.1943-5509.0000643,04014149
   Web of Science ®Google Scholar
• National Defense Research Committee. (1946). Effects of impact and explosion. Summary Technical Report of Division 2. Washington, DC: Office of Scientific Research and Development.
   Google Scholar
• Neff, M. (1998). A visual model for blast waves and fracture ( Thesis Report). Toronto: University of Toronto.
   Google Scholar
• Olmati, P., Trasborg, P., Naito, C., & Bontempi, F. (2015). Blast resistance of reinforced precast concrete walls under uncertaintys. International Journal of Critical Infrastructure, 11. Retrieved from http://www.researchgate.net/publication/280088983_Blast_resistant_design_of_precast_reinforced_concrete_walls_for_strategic_infrastructures_under_uncertainty
   Web of Science ®Google Scholar
• Precast Prestressed Concrete Institute (2010). PCI design handbook (7th ed.). Chicago, IL: PCI.
   Google Scholar
• Petrini, F., & Ciampoli, M. (2010). Performance-based wind design of tall buildings. Structure and Infrastructure Engineering, 8, 954–966. doi:10.1080/15732479.2011.574815
   Web of Science ®Google Scholar
• Shi, Y., & Stewart, M.G. (2015). Spatial reliability analysis of explosive blast load damage to reinforced concrete columns. Structural Safety, 53, 13–25. doi:10.1016/j.strusafe.2014.07.003
   Web of Science ®Google Scholar
• Shimizu, Y., Hirosawa, M., & Zhou, J. (2000). Statistical analysis of concrete strength in existing reinforced concrete buildings in Japan. 12WCEE2000: 12th World Conference on Earthquake Engineering, Aukland, New Zealand.
   Google Scholar
• Twisdale, L.A., Sues, R.H., & Lavelle, F.M. (1993). Reliability-based analysis and design methods for reinforced concrete protective structures ( Final Report). Tyndall Air Force Base: Engineering Research Division.
   Google Scholar
• Underwriters Laboratories. (2005). UL standard for safety for bullet-resisting equipment ( Report No. UL 752). Northbrook, IL: Author.
   Google Scholar
• Vamvatsikos, D., & Dolsek, M. (2011). Equivalent constant rates for performance-based seismic assessment of ageing structures. Structural Safety, 33, 8–18. doi:10.1016/j.strusafe.2010.04.005
   Web of Science ®Google Scholar
• Yankelevsky, D.Z. (1997). Local response of concrete slabs to low velocity missile impact. International Journal of Impact Engineering, 19, 331–343. doi:10.1016/S0734-743X(96)00041-3
   Web of Science ®Google Scholar
• Zaker, T.A. (1975). Fragment and debris hazards. Report No. DDESB TP 12. Department of Defense Explosives Safety Board.
   Google Scholar