Bridge performance indicators based on traffic load monitoring

References

• Ang, A. H. & Tang, W. H. (1975). Probability concepts in engineering, planning and design. New York, Toronto: Wiley.
   Google Scholar
• ARCHES D08. (2009). Report D08: Recommendations on bridge traffic load monitoring. Brussels: European Commission.
   Google Scholar
• ARCHES D10. (2009). Recommendations on dynamic amplification allowance. Brussels: European Commission.
   Google Scholar
• ARCHES D16. (2009). Recommendations on the use of soft, diagnostic and proof load testing. Brussels: European Commission.
   Google Scholar
• Bien, J., Elfgren, L., & Olofsson, J. (Eds.). (2007). Sustainable bridges – Assessment for future traffic demands and longer lives. Wrocław: Dolnoslaskie Wydawnictwo Edukacyjne.
   Google Scholar
• Caprani, C. C.. (2005). Probabilistic analysis of highway bridge traffic loading ( PhD thesis. University College Dublin, Dublin, Ireland.
   Google Scholar
• Caprani, C., Grave, S., O’Brien, E. J., & O’Connor, A. J. (2002). Critical loading events for the assessment of medium span bridges. International Conference on Computational Structures Technology, 147, 1–11.
   Google Scholar
• Casas, J. R. (2016). European standardization of quality specifications for roadway bridges: an overview. In Proceedings of the 8th international conference on Bridge Maintenance, Safety and Management, Foz do Iguaçu (Brazil), Taylor and Francis.
   Google Scholar
• Castillo, E. (1988). Extreme value theory in engineering. Cambridge, MA: Academic Press.
   Google Scholar
• COST. (2014). Memorandum of understanding – COST 1402. Brussels: European Cooperation in the Field of Scientific and Technical Research.
   Google Scholar
• COST 345. (2001). COST 345 – Procedures required for assessing higway structures. Brussels: European Cooperation in the Field of Scientific and Technical Research.
   Google Scholar
• DIN-1072. (1988). Straßen und Wegbrücken, Lastannahmen Erläuterungen. Berlin, Wien, Zurich: Beuth.
   Google Scholar
• Enright, B. (2010). Simulation of traffic loading on highway bridges ( PhD thesis). University College Dublin, Dublin, Ireland.
   Google Scholar
• Eurocode. (2002). Eurocode 0 – Basis of structural design. Brussels: European Committee for Standardization CEN.
   Google Scholar
• Eurocode. (2003). Eurocode 1: Actions on structures – Part 2: Traffic loads on bridges. Brussels: European Committee for Standardization CEN.
   Google Scholar
• Eurocode. (2004). Eurocode 2: Design of concrete structures – Part 1–1: General rules and rules for buildings. Brussels: European Committee for Standardization CEN.
   Google Scholar
• Eurocode. (2005). Eurocode 2: Design of concrete structures –- Part 2: Concrete bridges – Design and detailing rules. Brussels: European Committee for Standardization CEN.
   Google Scholar
• Furundžić, B. (1969). Privremeni tehnički propisi za opterećenje mostova na putovima PTP-5 (1949), Zbirka tehničkih propisa u građevinarstvu. Beograd: Građevinska knjiga.
   Google Scholar
• Getachew, A. & Obrien, E. J. (2007). Simplified site-specific traffic load models for bridge assessment. Structure and Infrastructure Engineering, 3(4), 303–311.10.1080/15732470500424245
   Web of Science ®Google Scholar
• Gulvanessian, H., Calgaro, J. A., & Holický, M. (2012). Designers’ guide to EN 1990 Eurocode: Basis of structural design. London: Thomas Telford.
   Google Scholar
• Holický, M. (2013). Introduction to probability and statistics for engineers. Verlag Berlin Heidelberg: Springer Science & Business Media.
   Google Scholar
• Ieng, S.-S. (2015). Bridge influence line estimation for bridge weigh-in-motion system. Journal of Computing in Civil Engineering, 29(1), 06014006.
   Web of Science ®Google Scholar
• Jacob, B. (2002). Weigh-in-Motion of axles and vehicles for Europe (WAVE), General Report. Paris.
   Google Scholar
• Jacob, B., OBrien, E. J., & Jehaes, S. (2002). Final Report of the COST 323 action. Paris.
   Google Scholar
• JCSS (2002). Probabilistic model code (12th ed.). Lyngby: Author.
   Google Scholar
• Kalin, J., Žnidarič, A., & Kreslin, M. (2015). Using weigh-in-motion data to determine bridge dynamic amplification factor. In EVACES’15, 6th International Confererence on Experimental Vibration Analysis for Civil Engineering Structures. Duebendorf, Switzerland.
   Google Scholar
• Karoumi, R., O’Brien, E. J., & Quiligan, M. (2006). Calculating an influence line from direct measurements. Bridge Engineering, 159(1–2), 31–34.
   Google Scholar
• Kirkegaard, P. H., Nielsen, S. R., & Enevoldsen, I. (1997). Heavy vehicles on minor highway bridges: calculation of dynamic impact factors from selected crossing scenarios. Structural Reliability Theory, R9722(172), 1–44.
   Google Scholar
• Koteš, P. & Vičan, J. (2012). Reliability levels for existing bridges evaluation according to eurocodes. Procedia Engineering, 40, 211–216.10.1016/j.proeng.2012.07.082
   Google Scholar
• Matos, J. C., Casas, J. R., & Fernandes, S. (2016). Quality specifications for roadway bridges (Bridge Spec). In Proceedings of the 8th international conference on Bridge Maintenance, Safety and Management. Taylor and Francis.
   Google Scholar
• Montgomery, D. C. & Runger, G. C. (2014). Applied statistics and probability for engineers (6th ed.). Hoboken, NJ: Wiley.
   Google Scholar
• Moses, F. (1979). Weigh-in-motion system using instrumented bridges. ASCE Transportation Engineering Journal, 105, 233–249.
   Web of Science ®Google Scholar
• Moses, F. & Verma, P. (1987). Load capacity evaluation of existing bridges ( Report No. 301). Washington, DC: National Cooperative Highway Research Program (NCHRP).
   Google Scholar
• O’Brien, E. J. (2011). Aplicações de pesagem em movimento na engenharia de pontes [Applications of weigh-in-motion in bridge engineering] In Proceedings of the 1st International Seminar of Weight in Motion, Florianopolis, Santa Catarina, Brazil.
   Google Scholar
• O’Brien, E. J., González, A., Dowling, J., & Žnidarič, A. (2013). Direct measurement of dynamics in road bridges using a bridge weigh-in-motion system. The Baltic Journal of Road and Bridge Engineering, 8(4), 263–270.10.3846/bjrbe.2013.34
   Web of Science ®Google Scholar
• O’Connor, A. & Enevoldsen, I. (2009). Probability-based assessment of highway bridges according to the new Danish guideline. Structure and Infrastructure Engineering, 5(2), 157–168.10.1080/15732470601022955
   Web of Science ®Google Scholar
• O’Brien, E., Schmidt, F., Hajializadeh, D., & Zhou, X.-Y. (2015). A review of probabilistic methods of assessment of load effects in bridges. Structural Safety, 53, 44–56.10.1016/j.strusafe.2015.01.002
   Web of Science ®Google Scholar
• Ralbovsky, M., McRobbie, S., Šajna, A., Leban, M. B., Sekulič, D., Žnidarič, A. (2014). Final report of advanced bridge monitoring techniques – TRIMM Report D32. Vienna: AIT.
   Google Scholar
• Šavor, Z. & Novak, M. Š. (2015). Procedures for reliability assessment of existing bridges. Journal of the Croatian Association of Civil Engineers, 67(6), 557–572.
   Google Scholar
• Schneider, J. & Vrouwenvelder, T. (2017). Introduction to safety and reliability of structures, structural engineering documents. Zurich: IABSE.
   Google Scholar
• Sivakumar, B., Ghosn, M., & Moses, F. (2011). Protocols for collecting and using traffic data in bridge design ( NCHRP Report No.683). Washington, DC: Transport Research Board.
   Google Scholar
• Skokandić, D. (2016). STSM Report – Application of B-WIM measurements in assessment of existing road bridges. Zagreb.
   Google Scholar
• Skokandić, D., Mandić Ivanković, A., & Džeba, I. (2016). Multi – level road bridge assessment. In Proceedings of 19th IABSE Congress, Stockholm, IABSE.
   Google Scholar
• Sofistik. (2014). Sofistik software for structural analysis. Germany: SOFISTIK AG.
   Google Scholar
• Strauss, A., Bergmeister, K., & Mandić-Ivanković, A. (2016). Applied and research based performance indicator database for highway bridges across Europe. In IALCCE – Fifth International Symposium on Life-Cycle Civil Engineering. Delft, The Netherlands.
   Google Scholar
• Strauss, A., & Mandić-Ivanković, A. (2016). Performance indicators for road bridges – Categorization overview. In Paper presented at the WG meeting of COST Action TU1406 Quality Specifications for Roadway Bridges, Standardization at a European Level. Belgrade, Serbia.
   Google Scholar
• Strauss, A., Mandić-Ivanković, A., Matos, J. C., & Casas, J. R. (2016). Performance Indicators for roadway bridges, technical report of the working group 1: Performance indicators.
   Google Scholar
• Strauss, A., Mandić-Ivanković, A., & Soussa, H. (2016). Performance indicators for road bridges. In Factsheet presented at the 3rd workshop of the COST Action TU 1402. Barcelona, Spain.
   Google Scholar
• Sykora, M. (2008). Assessment of existing bridges using Bayesian updating. In Proceedings of the 3rd International Conference ‘Reliability, safety and diagnostics of transport structures and means 2008’, University of Pardubice, Czech Republic.
   Google Scholar
• Wiśniewski, D. F., Casas, J. R., & Ghosn, M. (2012). Codes for safety assessment of existing bridges – Current state and further development. IABSE Structural Engineering International, 22(4), 552–561.10.2749/101686612X13363929517857
   Web of Science ®Google Scholar
• Woodward, R. J. (2001). Guidelines for assessing load carrying capacity – Final report of BRIME project. Brussels.
   Google Scholar
• Žnidarič, A. (2017). Influence of number and quality of weigh-in-motion data on evaluation of load effects on bridges ( Doctoral dissertation). University of Ljubljana, Ljubljana.
   Google Scholar
• Žnidarič, A., & Kreslin, M. (2012). Structures performance assessment, HeROAD Report 2.1. Ljubljana: ERANET Road II. Retrieved from www.eranetroad.org
   Google Scholar
• Žnidarič, A., Kreslin, M., Lavrič, I., & Kalin, J. (2012). Simplified approach to modelling traffic loads on bridges. Procedia – Social and Behavioural Sciences, 48, 2887–2896.
   Google Scholar
• Žnidarič, A., Herga, L., Pirman, B., Willenpart, T., Hevka, P., Močnik, C., et al. (2015). Management of bridges in Slovenia, national report. Seoul: PIARC – World Road Congress.
   Google Scholar
• Žnidarič, A., Kreslin, M., Leahy, C., O’Brien, E. J., Schmidt, F., & Pedersen, C. (2015). Guidelines on collecting WIM data and forecasting of traffic load effects on bridges. Re-GEN D3.1 Report.
   Google Scholar
• Žnidarič, A., Kreslin, M., & Kalin, J. (2016). Weigh-in-motion and traffic load monitoring. Fact Sheet WG, 2–9 COST Action TU 1402.
   Google Scholar