Application of distributed optical fiber sensors for the health monitoring of two real structures in Barcelona

References

• Barrias, A., Casas, J., & Villalba, S. (2016). A review of distributed optical fiber sensors for civil engineering applications. Sensors, 16(5), 748. doi:10.3390/s16050748
   PubMed Web of Science ®Google Scholar
• Belal, M., & Newson, T.P. (2011). A 5 cm spatial resolution temperature compensated distributed strain sensor evaluated using a temperature controlled strain rig. Optics Letters, 36(24), 4728–4730.10.1364/OL.36.004728
   PubMed Web of Science ®Google Scholar
• Billon, A., Henault, J.-M., Quiertant, M., Taillade, F., Khadour, A., Martin, R.-P., & Benzarti, K. (2014). Quantitative strain measurements with distributed fiber optic systems: Qualification of a sensing cable bonded to the surface of a concrete structure. 7th European Workshop on Structural Health Monitoring, EWSHM 2014 – 2nd European Conference of the Prognostics and Health Management (PHM) Society.
   Google Scholar
• Casas, J.R., & Cruz, P.J.S. (2003). Fiber optic sensors for bridge monitoring. Journal of Bridge Engineering, 8(6), 362–373. doi:10.1061/(ASCE)1084-0702(2003)8:6(362)
   Web of Science ®Google Scholar
• Casciati, S., Domaneschi, M., Inaudi, D. 2005a. “Damage assessment from SOFO dynamic measurements”, Proceedings of SPIE, (Vol. 5855 PART II, Article number 258, pp. 1048–1051.
   Google Scholar
• Casciati, S., Domaneschi, M., Inaudi, D. 2005b. “Local damage detection from dynamic SOFO experimental data”, Proceedings of SPIE, Volume 5765, PART 2, Article number 62, pp. 591–599.
   Google Scholar
• Domaneschi, M., Sigurdardottir, D., & Glišić, B. (2017). Damage detection on output-only monitoring of dynamic curvature in composite decks. Structural Monitoring and Maintenance, 4(1), 1–15 https://doi.org/https://doi.org/10.12989/smm.2017.4.1.00110.12989/smm.2017.4.1.001
   Web of Science ®Google Scholar
• Farrar, C.R., & Worden, K. (2007). An introduction to structural health monitoring. Philosophical Transactions. Series A, Mathematical, Physical, and Engineering Sciences, 365(1851), 303–315. doi:10.1098/rsta.2006.1928
   PubMed Web of Science ®Google Scholar
• Glisic, B., Hubbell, D., Sigurdardottir, D.H., & Yao, Y. (2013). Damage detection and characterization using long-gauge and distributed fiber optic sensors. Optical Engineering, 52, 87101. doi:10.1117/12.2009817
   Web of Science ®Google Scholar
• Glisic, B., & Inaudi, D. (2012). Development of method for in-service crack detection based on distributed fiber optic sensors. Structural Health Monitoring, 11(2), 161–171. doi:10.1177/1475921711414233
   Web of Science ®Google Scholar
• Grave, J.H.L., Håheim, M.L., & Echtermeyer, A.T. (2015). Measuring changing strain fi elds in composites with distributed fiber- optic sensing using the optical backscatter reflectometer. Composites Part B, 74, 138–146. doi:10.1016/j.compositesb.2015.01.003
   Web of Science ®Google Scholar
• Güemes, A., Fernández-López, A., & Soller, B. (2010). Optical fiber distributed sensing – physical principles and applications. Structural Health Monitoring, 9(3), 233–245. doi:10.1177/1475921710365263
   Web of Science ®Google Scholar
• Henault, J.-M., Moreau, G., Blairon, S., Salin, J., Courivaud, J.-R., Taillade, F., Merliot, E., Dubois, J. P., Bertrand, J., Buschaert, S., Mayer, S. (2010). Truly distributed optical fiber sensors for structural health monitoring: From the telecommunication optical fiber drawling tower to water leakage detection in dikes and concrete structure strain monitoring. Advances in Civil Engineering, 2010, 1–13. doi:10.1155/2010/930796
   Google Scholar
• Lopez-Higuera, J.M., Rodriguez Cobo, L., Quintela Incera, A., & Cobo, A. (2011). Fiber optic sensors in structural health monitoring. Journal of Lightwave Technology, 29(4), 587–608. doi:10.1109/JLT.2011.2106479
   Web of Science ®Google Scholar
• LUNA (2012). Optical backscatter reflectometer (Model OBR 4600). Author. Retrieved February 1, 2017, from http://lunainc.com/wp-content/uploads/%0A2012/11/NEW-OBR4600_Data-Sheet_Rev-04.pdf
   Google Scholar
• LUNA (2014). Distributed fiber optic sensing: Temperature Compensation of strain measurement contents. Author
   Google Scholar
• LUNA (2017). ODiSI fiber optic sensor installation guide. Author. Retrieved from https://lunainc.com/wp-content/uploads/2017/01/TN_Applying-Strain-Sensors_RevB_v1.pdf
   Google Scholar
• Mayhew, H.E., Frano, K.A., Svoboda, S.A., & Wustholz, K.L. (2014). Using Raman spectroscopy and surface-enhanced raman scattering to identify colorants in art: An experiment for an upper-division chemistry laboratory. Journal of Chemical Education, 92(1), 148–152.
   Web of Science ®Google Scholar
• Muehlethaler, C., Leona, M., & Lombardi, J.R. (2015). Review of surface enhanced Raman scattering applications in forensic science. Analytical Chemistry, 88(1), 152–169.
   PubMed Web of Science ®Google Scholar
• Palmieri, L., & Schenato, L. (2013). Distributed optical fiber sensing based on rayleigh scattering. The Open Optics Journal, 7(1), 104–127.10.2174/1874328501307010104
   Google Scholar
• Regier, R., & Hoult, N.A. (2014). Distributed strain behavior of a reinforced concrete bridge: Case study. Journal of Bridge Engineering, 19(12), 5014007. doi:10.1061/(ASCE)BE.1943-5592.0000637
   Web of Science ®Google Scholar
• Rodriguez, G., Casas, J.R., & Villalba, S. (2014). Assessing cracking characteristics of concrete structures by distributed optical fiber and non-linear finite element modelling to cite this version. In 7th European Workshop on Structural Health Monitoring. Nantes, France.
   Google Scholar
• Rodriguez, G., Casas, J.R., & Villalba, S. (2015a). SHM by DOFS in civil engineering: A review. Structural Monitoring and Maintenance, 2(4), 357–382 https://doi.org/10.12989/smm.2015.2.4.35710.12989/smm.2015.2.4.357
   Web of Science ®Google Scholar
• Rodríguez, G., Casas, J.R., & Villaba, S. (2015b). Cracking assessment in concrete structures by distributed optical fiber. Smart Materials and Structures, 24(3), 35005.10.1088/0964-1726/24/3/035005
   Web of Science ®Google Scholar
• Samiec, D. (2012). Distributed fibre-optic temperature and strain measurement with extremely high spatial resolution. Photonik International, 2012, 10–13.
   Google Scholar
• Shen, S., Wu, Z., Yang, C., Wan, C., Tang, Y., & Wu, G. (2010). An improved conjugated beam method for deformation monitoring with a distributed sensitive fiber optic sensor. Structural Health Monitoring, 9(4), 361–378.10.1177/1475921710361326
   Web of Science ®Google Scholar
• Todd, M.D., Johnson, G.A., & Vohra, S.T. (2001). Deployment of a fiber Bragg grating-based measurement system in a structural health monitoring application. Smart Materials and Structures, 10(3), 534.10.1088/0964-1726/10/3/316
   Google Scholar
• Uchida, S., Levenberg, E., & Klar, A. (2015). On-specimen strain measurement with fiber optic distributed sensing. Measurement, 60, 104–113.10.1016/j.measurement.2014.09.054
   Web of Science ®Google Scholar
• Villalba, S., & Casas, J.R. (2013). Application of optical fiber distributed sensing to health monitoring of concrete structures. Mechanical Systems and Signal Processing, 39(1), 441–451.10.1016/j.ymssp.2012.01.027
   Web of Science ®Google Scholar
• Villalba, V., Casas, J.R., & Villalba, S. (2012). Application of OBR fiber optic technology in structural health monitoring of Can Fatjó Viaduct (Cerdanyola de Vallés-Spain). In VI International Conference on Bridge Maintenance, Safety and Management. Stresa, Italy.
   Google Scholar
• Wan, K.T., Leung, C.K.Y., & Olson, N.G. (2008). Investigation of the strain transfer for surface-attached optical fiber strain sensors. Smart Materials and Structures, 17(3), 35037.10.1088/0964-1726/17/3/035037
   Google Scholar
• Ye, X.W., Su, Y.H., & Han, J.P. (2014). Structural health monitoring of civil infrastructure using optical fiber sensing technology: A comprehensive review. The Scientific World Journal, 2014, 652329. doi:10.1155/2014/652329
   Google Scholar