Numerical study on corrosion profile estimation of a corroded steel plate using eddy current

References

• Akutsu, A., Sasaki, E., Ebisawa, Y., & Tamura, H. (2017). Analysis of corrosion damage condition of steel members using low frequency eddy current testing. Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), 73(2), 387–398. doi: 10.2208/jscejseee.73.387
   Google Scholar
• Akutsu, A., Sasaki, E., & Tamura, H. (2018). Development of an advanced corrosion damage evaluation method for steel members focused on phase characteristics of low frequency eddy current. Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), 74(1), 145–156. doi: 10.2208/jscejseee.74.145
   Google Scholar
• Aoukili, A., & Khamlichi, A. (2016). Modeling an eddy-current probe for damage detection of surface cracks in metallic parts. Procedia Technology, 22, 527–534. doi: 10.1016/j.protcy.2016.01.112
   Google Scholar
• Appuhamy, J. R. S., Ohga, M., Kaita, T., & Dissanayake, R. (2011). Reduction of ultimate strength due to corrosion: A finite element computational method. International Journal of Engineering (IJE), 5(2), 194–207.
   Google Scholar
• Blitz, J. (1997). Electrical and magnetic methods of non-destructive testing (2nd ed.). London, UK: Chapman & Hall.
   Google Scholar
• Buck, J. A., Underhill, P. R., Morelli, J. E., & Krause, T. W. (2016). Simultaneous multiparameter measurement in pulsed eddy current steam generator data using artificial neural networks. IEEE Transactions on Instrumentation and Measurement, 65(3), 672–679. doi: 10.1109/TIM.2016.2514778
   Web of Science ®Google Scholar
• Cacciola, M., Calcagno, S., Morabito, F. C., & Versaci, M. (2007). Swarm optimization for imaging of corrosion by impedance measurements in eddy current test. IEEE Transactions on Magnetics, 43(4), 1853–1856. doi: 10.1109/TMAG.2007.892513
   Web of Science ®Google Scholar
• Chady, T., & Sikora, R. (2003). Optimization of eddy-current sensor for multifrequency systems. IEEE Transactions on Magnetics, 39(3), 1313–1316. doi: 10.1109/TMAG.2003.810412
   Web of Science ®Google Scholar
• Cheng, W. (2017). Thickness measurement of metal plates using swept-frequency eddy current testing and impedance normalization. IEEE Sensors Journal, 17(14), 4558–4569. doi: 10.1109/JSEN.2017.2710356
   Web of Science ®Google Scholar
• COMSOL Multiphysics^® (Version 5.2a) [Computer software]. Stockholm, Sweden: COMSOL Inc.
   Google Scholar
• Ether, N. D. E. (2017). The eddy current probe & accessories catalogue [Product Catalogue]. Retrieved from https://namikon2001.com/wp-content/uploads/2017/08/ETher_NDE_Probe_Catalogue_V7.1.pdf.
   Google Scholar
• Fan, M., Cao, B., Tian, G., Ye, B., & Li, W. (2016). Thickness measurement using liftoff point of intersection in pulsed eddy current responses for elimination of liftoff effect. Sensors and Actuators A: Physical, 251, 66–74. doi: 10.1016/j.sna.2016.10.003
   Web of Science ®Google Scholar
• Fan, M., Cao, B., Sunny, A. I., Li, W., Tian, G., & Ye, B. (2017). Pulsed eddy current thickness measurement using phase features immune to liftoff effect. NDT & E International, 86, 123–131. doi: 10.1016/j.ndteint.2016.12.003
   Web of Science ®Google Scholar
• García-Martín, J., Gómez-Gil, J., & Vázquez-Sánchez, E. (2011). Non-destructive techniques based on eddy current testing. Sensors, 11(3), 2525–2565. doi: 10.3390/s110302525
   PubMed Web of Science ®Google Scholar
• GE Inspection Technologies. (2007). Eddy current probes and accessories catalogue [Product Catalogue]. Retrieved from https://www.tcontrol.ro/Content/prospecte/ECprobes.pdf.
   Google Scholar
• Hamada, H., Yamaji, T., & Akira, Y. (2011). Corrosion protection for steel pipe piles and sheet piles. Steel Construction Today and Tomorrow, 33. Retrieved from http://www.jisf.or.jp/en/activity/sctt/documents/SCTT33.pdf
   Google Scholar
• Hashimoto, R., Imai, A., Imafuku, K., Ganaha, Y., Kawase, Y., & Furukawa, M. (2017). High-durability corrosion protection of marine steel structures using titanium covers (Report No. 115). Retrieved from Nippon Steel & Sumitomo Metal website: http://www.nssmc.com/tech/report/nssmc/pdf/115-12.pdf
   Google Scholar
• Hoshikawa, H., & Koyama, K. (1998). Uniform eddy current probe with little disrupting noise. In D. O. Thompson, & D. E. Chimenti (Eds.), Review of progress in quantitative nondestructive evaluation (Vol. 17A, pp. 1059–1066). New York, NY: Plenum Press.
   Google Scholar
• Kasai, N., Mori, S., Tamura, K., Sekine, K., Tsuchida, T., & Serizawa, Y. (2016). Predicting maximum depth of corrosion using extreme value analysis and Bayesian inference. International Journal of Pressure Vessels and Piping, 146, 129–134. doi: 10.1016/j.ijpvp.2016.08.002
   Web of Science ®Google Scholar
• Koch, G., Varney, J., Thompson, N., Moghissi, O., Gould, M., & Payer, J. (2016). International measures of prevention, application, and economics of corrosion technologies study. Houston, TX: NACE International IMPACT Report.
   Google Scholar
• Koyama, K., Hoshikawa, H., & Taniyama, N. (Eds.) (2000). October). Investigation of eddy current testing of weld zone by uniform eddy current probe. In Proceedings of 15th World Conference on NDT (WCNDT2000). Roma, Italy. Retrieved from https://www.ndt.net/article/wcndt00/papers/idn046/idn046.htm
   Google Scholar
• Lin, Y., Gigliotti, M., Lafarie-Frenot, M. C., Bai, J., Marchand, D., & Mellier, D. (2015). Experimental study to assess the effect of carbon nanotube addition on the through-thickness electrical conductivity of CFRP laminates for aircraft applications. Composites Part B: Engineering, 76, 31–37. doi: 10.1016/j.compositesb.2015.02.015
   Web of Science ®Google Scholar
• Lu, M., Yin, L., Peyton, A. J., & Yin, W. (2016). A novel compensation algorithm for thickness measurement immune to lift-off variations using eddy current method. IEEE Transactions on Instrumentation and Measurement, 65(12), 2773–2779.
   Web of Science ®Google Scholar
• Luong, B., & Santosa, F. (1998). Quantitative imaging of corrosion in plates by eddy current methods. SIAM Journal on Applied Mathematics, 58(5), 1509–1531. doi: 10.1137/S0036139996313356
   Web of Science ®Google Scholar
• Mao, X., & Lei, Y. (2016). Thickness measurement of metal pipe using swept-frequency eddy current testing. NDT & E International, 78, 10–19. doi: 10.1016/j.ndteint.2015.11.001
   Web of Science ®Google Scholar
• Melchers, R. E. (2005). The effect of corrosion on the structural reliability of steel offshore structures. Corrosion Science, 47(10), 2391–2410. doi: 10.1016/j.corsci.2005.04.004
   Web of Science ®Google Scholar
• Olympus, N. D. T. (2010). Eddy current inspection: Eddy current probes and accessories [Product Catalogue]. Retrieved from http://www.epsilon-ndt.com/upload/file/eddy-current-problari.pdf.
   Google Scholar
• Robers, M. A., & Scottini, R. (2002). Pulsed eddy current in corrosion detection. In Paper presented at the 8th European Conference on Nondestructive Testing, Barcelona, Spain.
   Google Scholar
• Rosado, L. S., Gonzalez, J. C., Santos, T. G., Ramos, P. M., & Piedade, M. (2013). Geometric optimization of a differential planar eddy currents probe for non-destructive testing. Sensors and Actuators A: Physical, 197, 96–105. doi: 10.1016/j.sna.2013.04.010
   Web of Science ®Google Scholar
• Roy, D., Kumar Kaushik, B., & Chakraborty, R. (2013). A novel E-shaped coil for eddy current testing. Sensor Review, 33(4), 363–370. doi: 10.1108/SR-07-2012-666
   Web of Science ®Google Scholar
• Tamura, H., Tominaga, S., Sasaki, E., & Minesawa, G. V. (2015). ECT-based thickness loss estimation for corroded steel plate. In Paper presented at the 20th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2015), Sendai, Japan (OS3-1).
   Google Scholar
• Wang, H., Li, W., & Feng, Z. (2015). Noncontact thickness measurement of metal films using eddy-current sensors immune to distance variation. IEEE Transactions on Instrumentation and Measurement, 64(9), 2557–2564.
   Web of Science ®Google Scholar
• Wang, J., Yusa, N., Fukutomi, H., & Hashizume, H. (2014). Low frequency eddy current inspection of wall-thinning of large pipes by bobbin coils. In C. Xu, L. Yang, & Q. Pan (Eds.), FENDT2014. Proceedings of 2014 IEEE Far East Forum on Nondestructive Evaluation/Testing (pp. 172–175). Piscataway, NJ: IEEE
   Google Scholar
• Wang, J., Yusa, N., Pan, H., Kemppainen, M., Virkkunen, I., & Hashizume, H. (2013). Discussion on modeling of thermal fatigue cracks in numerical simulation based on eddy current signals. NDT&E International, 55, 96–101. doi: 10.1016/j.ndteint.2013.01.012
   Web of Science ®Google Scholar
• Waters, C. (1999). RDT-INCOTEST®: For the detection of corrosion under insulation. Non-Destructive Testing Australia, 36(5), 124–129.
   Google Scholar
• Yating, Y., & Pingan, D. (2007). Optimization of an eddy current sensor using finite element method. In Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation (pp. 3795–3800). Harbin, China. Retrieved from https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4304179.
   Google Scholar
• Yin, W., & Peyton, A. J. (2007). Thickness measurement of non-magnetic plates using multi-frequency eddy current sensors. NDT & E International, 40(1), 43–48. doi: 10.1016/j.ndteint.2006.07.009
   Web of Science ®Google Scholar
• Yin, W., Peyton, A. J., & Dickinson, S. J. (2004). Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model. IEEE Transactions on Instrumentation and Measurement, 53(4), 1335–1338. doi: 10.1109/TIM.2004.830585
   Web of Science ®Google Scholar
• Zhou, H. T., Hou, K., Pan, H. L., Chen, J. J., & Wang, Q. M. (2015). Study on the optimization of eddy current testing coil and the defect detection sensitivity. Procedia Engineering, 130, 1649–1657. doi: 10.1016/j.proeng.2015.12.331
   Google Scholar