Bond of naturally corroded, plain reinforcing bars in concrete

References

• Abrams, D. (1913). Test of Bond Between Concrete and Steel. University of Illinois at Urbana-Champaign: Bulletin No. 71, Engineering Experiment Station, University of Illinois, Urbana.
   Google Scholar
• ACI Committee 408. (2003). ACI 408R-03 Bond and Development of Straight Reinforcing Bars in Tension. American Concrete Institute, 1–49.
   Google Scholar
• Austin, S., Lyons, R., & Ing, M. (2004). Electrochemical behavior of steel-reinforced concrete during accelerated corrosion testing. CORROSION, 60(2), 203–212. doi:10.5006/1.3287722
   Web of Science ®Google Scholar
• Baldwin, M. I., & Clark, L. A. (1995). The assessment of reinforcing bars with inadequate anchorage. Magazine of Concrete Research, 47(171), 95–102. doi:10.1680/macr.1995.47.171.95
   Web of Science ®Google Scholar
• Bell, B. (2004). European Railway Bridge Demography - Deliverable D 1.2 (Tech. Rep.).
   Google Scholar
• Bertolini, L., Elsener, B., Pedeferri, P., & Polder, R. (2004). Corrosion of steel in concrete. prevention, diagnosis, repair. Weinheiim, Germany: John Wiley & Sons.
   Google Scholar
• Blomfors, M., Zandi, K., Lundgren, K., & Coronelli, D. (2018). Engineering bond model for corroded reinforcement. Engineering Structures, 156, 394–410. doi:10.1016/j.engstruct.2017.11.030
   Web of Science ®Google Scholar
• Cairns, J., Du, Y., & Law, D. (2006). Residual bond strength of corroded plain round bars. Magazine of Concrete Research, 58(4), 221–231. doi:10.1680/macr.2006.58.4.221
   Web of Science ®Google Scholar
• Cairns, J., Du, Y., & Law, D. (2008). Structural performance of corrosion-damaged concrete beams. Magazine of Concrete Research, 60(5), 359–370. doi:10.1680/macr.2007.00102
   Web of Science ®Google Scholar
• Cairns, J., & Feldman, L. (2018). Strength of laps and anchorages of plain surface bars. Structural Concrete, 19(6), 1782–1791. ), doi:10.1002/suco.201700242
   Web of Science ®Google Scholar
• Cairns, J., Plizzari, G. A., Du, Y., Law, D. W., & Franzoni, C. (2005). Mechanical Properties of Corrosion-Damaged Reinforcement. ACI Materials Journal, 102-M29(102), 256–264.
   Google Scholar
• CEB-FIP (2013). fib Model Code for Concrete Structures 2010. Lausanne: International Federation for Structural Concrete.
   Google Scholar
• CEB-FIP Bulletin n.10. (2000). Bond of reinforcement in concrete: State of the art. FIB Bulletin, 10(December), 434.
   Google Scholar
• Coronelli, D., François, R., Dang, H., & Zhu, W. (2019). Strength of corroded RC beams with Bond deterioration. Journal of Structural Engineering, 145(10), 04019097–04019018. doi:10.1061/(ASCE)ST.1943-541X.0002358
   Web of Science ®Google Scholar
• Creaform. (n.d.). Retrieved from https://www.creaform3d.com.
   Google Scholar
• Dai, L., Bian, H., Wang, L., Potier-Ferry, M., & Zhang, J. (2020). Prestress Loss diagnostics in pretensioned concrete structures with corrosive cracking. Journal of Structural Engineering, 146(3), 04020013. doi:10.1061/(ASCE)ST.1943-541X.0002554
   Web of Science ®Google Scholar
• Dang, V. H., & François, R. (2013). Influence of long-term corrosion in chloride environment on mechanical behaviour of RC beam. Engineering Structures, 48, 558–568. doi:10.1016/j.engstruct.2012.09.021
   Web of Science ®Google Scholar
• Fang, C., Lundgren, K., Chen, L., & Zhu, C. (2004). Corrosion influence on bond in reinforced concrete. Cement and Concrete Research, 34(11), 2159–2167. doi:10.1016/j.cemconres.2004.04.006
   Web of Science ®Google Scholar
• Feldman, L. R., & Bartlett, F. M. (2005). Bond strength variability in pullout specimens with plain reinforcement. ACI Structural Journal, 102(6), 860–867.
   Web of Science ®Google Scholar
• Fernandez, I., & Berrocal, C. (2019). Mechanical properties of 30 year-old naturally corroded steel reinforcing bars. International Journal of Concrete Structures and Materials, 13(1), 9. doi:10.1186/s40069-018-0308-x
   Web of Science ®Google Scholar
• Fernandez, I., Herrador, M. F., Marí, A. R., & Bairán, J. M. (2016). Structural effects of steel reinforcement corrosion on statically indeterminate reinforced concrete members. Materials and Structures, 49(12), 4959–4973. doi:10.1617/s11527-016-0836-2
   Web of Science ®Google Scholar
• Fernandez, I., Herrador, M. F., Marí, A. R., & Bairán, J. M. (2018). Ultimate capacity of corroded statically indeterminate reinforced concrete members. International Journal of Concrete Structures and Materials, 12(1), 75. doi:10.1186/s40069-018-0297-9
   Web of Science ®Google Scholar
• Fernandez, I., Lundgren, K., & Zandi, K. (2018). Evaluation of corrosion level of naturally corroded bars using different cleaning methods, computed tomography, and 3D optical scanning. Materials and Structures, 51(3), 1–13. doi:10.1617/s11527-018-1206-z
   Web of Science ®Google Scholar
• François, R., Khan, I., & Dang, V. H. (2013). Impact of corrosion on mechanical properties of steel embedded in 27-year-old corroded reinforced concrete beams. Materials and Structures, 46(6), 899–910. doi:10.1617/s11527-012-9941-z
   Web of Science ®Google Scholar
• Gustavson, R. (2004). Experimental studies of the bond response of three-wire strands and some influencing parameters. Materials and Structures, 37(266), 96–106. doi:10.1617/13909
   Web of Science ®Google Scholar
• Hobbs, D. (2001). Concrete deterioration: causes, diagnosis, and minimising risk. International Materials Reviews, 46(3), 117–144. doi:10.1179/095066001101528420
   Web of Science ®Google Scholar
• Khan, I., François, R., & Castel, A. (2014). Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams. Cement and Concrete Research, 56, 84–96. doi:10.1016/j.cemconres.2013.11.006
   Web of Science ®Google Scholar
• Kioumarsi, M., Hendriks, M., Kohler, J., & Geiker, M. (2016). The effect of interference of corrosion pits on the failure probability of a reinforced concrete beam. Engineering Structures, 114, 113–121. doi:10.1016/j.engstruct.2016.01.058
   Web of Science ®Google Scholar
• Kioumarsi, M., Markeset, G., & Hooshmandi, S. (2017). Effect of pit distance on failure probability of a corroded RC beam. Procedia Engineering, 171, 526–533. doi:10.1016/j.proeng.2017.01.365
   Google Scholar
• Lundgren, K. (2007). Effect of corrosion on the bond between steel and concrete: an overview. Magazine of Concrete Research, 59(6), 447–461. doi:10.1680/macr.2007.59.6.447
   Web of Science ®Google Scholar
• Lundgren, K., Robuschi, S., & Zandi, K. (2019). Methodology for testing rebar – concrete bond in specimens from decommissioned structures. International Journal of Concrete Structures and Materials, 13(1), 38. doi:10.1186/s40069-019-0350-3
   Web of Science ®Google Scholar
• Malumbela, G., Alexander, M., & Moyo, P. (2009). Steel corrosion on RC structures under sustained service loads - A critical review. Engineering Structures, 31(11), 2518–2525. nov). doi:10.1016/j.engstruct.2009.07.016
   Web of Science ®Google Scholar
• Melo, J., Rossetto, T., & Varum, H. (2015). Experimental study of bond–slip in RC structural elements with plain bars. Materials and Structures, 48(8), 2367–2381. doi:10.1617/s11527-014-0320-9
   Web of Science ®Google Scholar
• Papakonstantinou, K. G., & Shinozuka, M. (2013). Probabilistic model for steel corrosion in reinforced concrete structures of large dimensions considering crack effects. Engineering Structures, 57, 306–326. doi:10.1016/j.engstruct.2013.06.038
   Web of Science ®Google Scholar
• Robuschi, S., Lundgren, K., Fernandez, I., & Flansbjer, M. (2020). Anchorage of naturally corroded plain reinforcement bars in flexural members. Materials and Structures, 53(2), 38. doi:10.1617/s11527-020-01471-2
   Web of Science ®Google Scholar
• Saifullah, M., & Clark, L. (1994). Effect of corrosion rate on the bond strength of corroded reinforcement. Proceedings of International Conference: Corrosion and Corrosion Protection of Steel in Concrete, I, 591–600.
   Google Scholar
• Tahershamsi, M., Fernandez, I., Lundgren, K., & Zandi, K. (2017). Investigating correlations between crack width, corrosion level and anchorage capacity. Structure and Infrastructure Engineering, 13(10), 1294–1307. doi:10.1080/15732479.2016.1263673
   Web of Science ®Google Scholar
• Tahershamsi, M., Zandi, K., Lundgren, K., & Plos, M. (2014). Anchorage of naturally corroded bars in reinforced concrete structures. Magazine of Concrete Research, 66(14), 729–744. doi:10.1680/macr.13.00276
   Web of Science ®Google Scholar
• Verderame, G. M., De Carlo, G., Ricci, P., & Fabbrocino, G. (2009). Cyclic bond behaviour of plain bars. Part II: Analytical investigation. Construction and Building Materials, 23(12), 3512–3522. doi:10.1016/j.conbuildmat.2009.07.001
   Web of Science ®Google Scholar
• Verderame, G. M., Ricci, P., De Carlo, G., & Manfredi, G. (2009). Cyclic bond behaviour of plain bars. Part I: Experimental investigation. Construction and Building Materials, 23(12), 3499–3511. doi:10.1016/j.conbuildmat.2009.07.002
   Web of Science ®Google Scholar
• Verderame, R., Ricci P., Esposito, S., & Sansiviero F. C. (2011). Le Caratteristiche Meccaniche degli Acciai Impiegati nelle Strutture in c.a. realizzate dal 1950 al 1980. XXVI Convegno Nazionale AICAP.
   Google Scholar
• Virmani, Y. P. (2002). Corrosion Costs and Preventive Strategies in the United States (Tech. Rep.). U.S. Department of transportation, Federal Highway Administration (FHWA).
   Google Scholar
• Wang, L., Dai, L., Bian, H., Ma, Y., & Zhang, J. (2019). Concrete cracking prediction under combined prestress and strand corrosion. Structure and Infrastructure Engineering, 15(3), 285–295. doi:10.1080/15732479.2018.1550519
   Web of Science ®Google Scholar
• Wang, X., Stewart, M. G., & Nguyen, M. (2012). Impact of climate change on corrosion and damage to concrete infrastructure in Australia. Climatic Change, 110(3-4), 941–957. doi:10.1007/s10584-011-0124-7
   Web of Science ®Google Scholar
• Williamson, S., & Clark, L. (2002). Effect of corrosion and Load on Reinforcement Bond Strength. Structural Engineering International, 12(2), 117–119. doi:10.2749/101686602777965559
   Google Scholar
• Yingshu, Y., Yongsheng, J., & Surendra, P. (2007). Comparison of two accelerated corrosion techniques for concrete structures. ACI Structural Journal, 104(3), 344–347.
   Web of Science ®Google Scholar
• Zhu, W., François, R., Cleland, D., & Coronelli, D. (2015). Failure mode transitions of corroded deep beams exposed to marine environment for long period. Engineering Structures, 96, 66–77. doi:10.1016/j.engstruct.2015.04.004
   Web of Science ®Google Scholar