Time-variant probabilistic random degradation model on flexural capacity of road tunnel linings

References

• Abbas, S., & Nehdi, M. L. (2018). Mechanical behavior of RC and SFRC precast tunnel lining segments under chloride ions exposure. Journal of Materials in Civil Engineering, 30(4), 04018047. doi:10.1061/(ASCE)MT.1943-5533.0002217
   Web of Science ®Google Scholar
• Abbas, S., Soliman, A. M., & Nehdi, M. L. (2014). Mechanical performance of reinforced concrete and steel fiber-reinforced concrete precast tunnel lining segments: A case study. ACI Materials Journal, 111(5), 501–510. doi:10.14359/51687101
   Web of Science ®Google Scholar
• Ai, Q., Yuan, Y., Mahadevan, S., & Jiang, X. M. (2016). Probabilistic degradation modelling of circular tunnels assembled from segmental linings. Structural Concrete, 17(2), 257–273. doi:10.1002/suco.201400122
   Web of Science ®Google Scholar
• Almusallam, A. A. (2001). Effect of degree of corrosion on the properties of reinforcing steel bars. Construction & Building Materials, 15(8), 361–368. doi:10.1016/S0950-0618(01)00009-5
   Web of Science ®Google Scholar
• Alsulaimani, G. J., Kaleemullah, M., Basunbul, I. A. & Rasheeduzzafar (1990). Influence of corrosion and cracking on bond behavior and strength of reinforced-concrete members. ACI Structural Journal, 87(2), 220–231.
   Web of Science ®Google Scholar
• Andrade, C., Alonso, C., & Molina, F. J. (1993). Cover cracking as a function of bar corrosion.1. Experimental test. Materials & Structures, 26(8), 453–464. doi:10.1007/BF02472805
   Google Scholar
• Baji, H., Li, C. Q., Scicluna, S., & Dauth, J. (2017). Risk-cost optimised maintenance strategy for tunnel structures. Tunnelling & Underground Space Technology, 69(10), 72–84. doi:10.1016/j.tust.2017.06.008
   Google Scholar
• Burgess, N., Fagents, J., & Paterson, J. (2002). Northern line tunnel reconstruction at old street. Proceedings of the Institution of Civil Engineers – Transport, 153(1), 1–11. ≤Go to ISI≥://WOS:000174832600001 doi:10.1680/tran.2002.153.1.1
   Web of Science ®Google Scholar
• Campione, G., & Cannella, F. (2018). Engineering failure analysis of corroded RC beams in flexure and shear. Engineering Failure Analysis, 86, 100–114. doi:10.1016/j.engfailanal.2017.12.015
   Web of Science ®Google Scholar
• Cannavo, F. (2012). Sensitivity analysis for volcanic source modeling quality assessment and model selection. Computers & Geosciences, 44, 52–59. 10.1016/j.cageo.2012.03.008.
   Web of Science ®Google Scholar
• Chapman, D. R. (2002). Selection and design of corrosion protection liner for precast concrete segment tunnel liner. Paper presented at the North American Tunneling Conference 2002, May 18–22, 2002, 171–179, Seattle, WA.
   Google Scholar
• Chen, J., Liang, C., & Chen, L. (2011). Parameter sensitivity analysis of SWAT model-A case study of small watersheds with different land cover types in Hailuogou valley. South-to-North Water Transfers & Water Science & Technology, 9(2), 41–45.
   Google Scholar
• China Association for Engineering Construction Standardization. (2007). CECS 220 Standard for durability assessment of concrete structures. Beijing: China Architecture & Building Press.
   Google Scholar
• Coronelli, D. (2002). Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete. ACI Structural Journal, 99(3), 267–276.
   Web of Science ®Google Scholar
• Coronelli, D., & Gambarova, P. (2004). Structural assessment of corroded reinforced concrete beams: Modeling guidelines. Journal of Structural Engineering, 130(8), 1214–1224. https://doi.org/10.1061/(asce)0733-9445(2004)130:8(1214) doi:10.1061/(ASCE)0733-9445(2004)130:8(1214)
   Web of Science ®Google Scholar
• Coronelli, D., Hanjari, K. Z., & Lundgren, K. (2013). Severely corroded RC with cover cracking. Journal of Structural Engineering, 139(2), 221–232. https://doi.org/10.1061/.(asce)st.1943-541x.0000633 doi:10.1061/(ASCE)ST.1943-541X.0000633
   Web of Science ®Google Scholar
• Gao, W., & Kessissoglou, N. J. (2007). Dynamic response analysis of stochastic truss structures under non-stationary random excitation using the random factor method. Computer Methods in Applied Mechanics & Engineering, 196(25–28), 2765–2773. doi:10.1016/j.cma.2007.02.005
   Web of Science ®Google Scholar
• Gao, W., Song, C. M., & Tin-Loi, F. (2010). Probabilistic interval analysis for structures with uncertainty. Structural Safety, 32(3), 191–199. doi:10.1016/j.strusafe.2010.01.002
   Web of Science ®Google Scholar
• Grall, A., Berenguer, C., & Dieulle, L. (2002). A condition-based maintenance policy for stochastically deteriorating systems. Reliability Engineering & System Safety, 76(2), 167–180. doi:10.1016/S0951-8320(01)00148-X
   Web of Science ®Google Scholar
• He, C., Feng, K., Sun, Q., & Wang, S. M. (2017). Consideration issues about structural durability of shield tunnel. Tunnel Construction, 31(11), 1351–1365.
   Google Scholar
• Lei, M. F., Peng, L. M., & Shi, C. H. (2014). An experimental study on durability of shield segments under load and chloride environment coupling effect. Tunnelling & Underground Space Technology, 42(5), 15–24. doi:10.1016/j.tust.2014.01.004
   Google Scholar
• Liang, Y., Su, W., Fang, L., & Yang, J. (2014). Field test and analysis on stress of lining of large-diameter river-crossing shield tunnel. Tunnel Construction, 34(7), 637–641.
   Google Scholar
• Liu, D. J., Huang, H. W., Yue, Q. R., Xue, Y. D., & Wang, M. Z. (2016). Behaviour of tunnel lining strengthened by textile-reinforced concrete. Structure & Infrastructure Engineering, 12(8), 964–976. doi:10.1080/15732479.2015.1076009
   Web of Science ®Google Scholar
• Liu, X., Hu, X. Y., Guan, L. X., & Sun, W. (2017). The ultimate bearing capacity of rectangular tunnel lining assembled by composite segments: An experimental investigation. Steel & Composite Structures, 24(4), 481–497. 10.12989/scs.2017.24.4.481.
   Web of Science ®Google Scholar
• Liu, X., Ye, Y. H., Liu, Z., & Huang, D. Z. (2018). Mechanical behavior of quasi-rectangular segmental tunnel linings: First results from full-scale ring tests. Tunnelling & Underground Space Technology, 71, 440–453. doi:10.1016/j.tust.2017.09.019
   Web of Science ®Google Scholar
• Liu, X., Zhang, C., Zhang, C. G., & Yuan, Y. (2017). Ultimate load-carrying capacity of the longitudinal joints in segmental tunnel linings. Structural Concrete, 18(5), 693–709. doi:10.1002/suco.201600070
   Web of Science ®Google Scholar
• Luo, Y., Chen, J., Gao, S., Deng, X., & Diao, P. (2017). Stability analysis of super-large-section tunnel in loess ground considering water infiltration caused by irrigation. Environmental Earth Sciences, 76(22), 1–17. doi:10.1007/s12665-017-7106-7
   PubMed Web of Science ®Google Scholar
• Lv, Y., Zhang, J., Peng, H., & Zhang, K. (2011). Analysis of the flexual bearing capacity of corroded reinforced concrete beams with double reinforced rectangular section. Journal of Experimental Mechanics, 26(4), 471–477.
   Google Scholar
• Molina, F. J., Alonso, C., & Andrade, C. (1993). Cover cracking as a function of rebar corrosion.2. Numerical-model. Materials & Structures, 26(9), 532–548. doi:10.1007/BF02472864
   Google Scholar
• Nagataki, S., Ohga, H., & Kim, E. K. (1986). Effect of curing conditions on the carbonation of concrete with fly-ash and the corrosion of reinforcement long-term tests. Journal of the American Concrete Institute, 83(2), 332–333.
   Google Scholar
• Niu, D. T. (2003). Concrete structure durability and life prediction. New Zealand: Science Press.
   Google Scholar
• Pan, Z. A. F., Fu, C. C., & Jiang, Y. (2011). Uncertainty analysis of creep and shrinkage effects in long-span continuous rigid frame of Sutong Bridge. Journal of Bridge Engineering, 16(2), 248–258. doi:10.1061/(ASCE)BE.1943-5592.0000147
   Web of Science ®Google Scholar
• Papadakis, V. G. (2000). Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress. Cement & Concrete Research, 30(2), 291–299. https://doi.org/10.1016/s0008-8846(99)00249-5 doi:10.1016/S0008-8846(99)00249-5
   Web of Science ®Google Scholar
• Papadakis, V. G., Vayenas, C. G., & Fardis, M. N. (1991). Experimental investigation and mathematical-modeling of the concrete carbonation problem. Chemical Engineering Science, 46(5–6), 1333–1338. doi:10.1016/0009-2509(91)85060-B
   Web of Science ®Google Scholar
• Rodriguez, J., Ortega, L. M., & Casal, J. (1997). Load carrying capacity of concrete structures with corroded reinforcement. Construction & Building Materials, 11(4), 239–248. doi:10.1016/S0950-0618(97)00043-3
   Web of Science ®Google Scholar
• Saetta, A. V., & Vitaliani, R. V. (2004). Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures Part I: Theoretical formulation. Cement & Concrete Research, 34(4), 571–579. doi:10.1016/j.cemconres.2003.09.009
   Web of Science ®Google Scholar
• Saetta, A. V., & Vitaliani, R. V. (2005). Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures Part II. Cement & Concrete Research, 35(5), 958–967. doi:10.1016/j.cemconres.2004.06.023
   Web of Science ®Google Scholar
• Sze, A. P. C., & Chan, C. T. W. (2000). Application of fiber-reinforced shotcrete in repair of tunnel linings in Hong Kong. Special Publication, 193(1), 63–78. 10.14359/5813.
   Google Scholar
• Ting, S. C., & Nowak, A. S. (1991a). Effect of reinforcing steel area loss on flexural behavior of reinforced-concrete beams. ACI Structural Journal, 88(3), 309–314.
   Web of Science ®Google Scholar
• Ting, S. C., & Nowak, A. S. (1991b). Effect of reinforcing steel area loss on flexural behavior of reinforced concrete beams. Structural Journal, 88(3), 309–314.
   Google Scholar
• Val, D. V. (2007). Deterioration of strength of RC beams due to corrosion and its influence on beam reliability. Journal of Structural Engineering, 133(9), 1297–1306. doi:10.1061/(ASCE)0733-9445(2007)133:9(1297)
   Web of Science ®Google Scholar
• Wan, X. M. (2011). Deterioration mechanisms of reinforced concrete structures under combined mechanical and environmental action. Xi’an: Xi’an University of Architecture and Technology.
   Google Scholar
• Wu, B. H., Wu, D., Gao, W., & Song, C. M. (2016). Time-variant random interval response of concrete-filled steel tubular composite curved structures. Composites Part B: Engineering, 94(6), 122–138. doi:10.1016/j.compositesb.2016.03.029
   Google Scholar
• Wu, D., Gao, W., Tangaramvong, S., & Tin-Loi, F. (2014). Robust stability analysis of structures with uncertain parameters using mathematical programming approach. International Journal for Numerical Methods in Engineering, 100(10), 720–745. doi:10.1002/nme.4758
   Web of Science ®Google Scholar
• Wu, H. R., Jin, W. L., Lv, Q. F., & Wang, H. L. (2012). Reliability-based zonation of environmental area according to its effect on durability of concrete structures. Journal of Zhejiang University, 46(3), 416–423.
   Google Scholar
• Wu, Q. (2010). Research on flexural RC components exposed to marine environments: Durability and life prediction. Nanjing: Nanjing University of Aeronautics and Astronautics.
   Google Scholar
• Xu, S. (2003). The models of deterioration and durability evaluation of reinforced concrete structure. Xi’an: Xi'an University of Architecture and Technology.
   Google Scholar
• Zhang, Y., Cao, Y., & Chen, X. (2009). Study on durability technology and life prediction of tunnel structure suffering chloride salt attack. Hunan Communication Science & Technology, 35(3), 151–155.
   Google Scholar
• Zhou, J., He, C., Xiao, M., & Song, H. (2012). Field test and numerical simulation of mechanics of segment lining of Shiziyang underwater shield tunnel. Journal of the China Railway Society, 34(7), 115–121.
   Google Scholar