References
- Abbasi, M., & Moustafa, M. (2019). Time-dependent seismic fragilities of older and newly designed multi-frame reinforced concrete box-girder bridges in California. Earthquake Spectra, 35(1), 233–266. doi:https://doi.org/10.1193/102317EQS220M
- Albrecht, P., & Naeemi, A. H. (1984). Performance of weathering steel in bridges. Washington, DC: National Cooperative Highway Research Program.
- Alipour, A., Shafei, B., & Shinozuka, M. (2011). Performance evaluation of deteriorating highway bridges located in high seismic areas. Journal of Bridge Engineering, 16(5), 597–611. doi:https://doi.org/10.1061/(ASCE)BE.1943-5592.0000197
- Balafas, I., & Burgoyne, C. J. (2010). Environmental effects on cover cracking due to corrosion. Cement and Concrete Research, 40(9), 1429–1440. doi:https://doi.org/10.1016/j.cemconres.2010.05.003
- Bamforth, P. B., & Chapman-Andrews, J. (1994). Long term performance of RC elements under UK coastal exposure conditions. In R. N. Swamy (Ed.). International conference on corrosion and corrosion protection of steel in concrete (pp. 139–156). Sheffield Academic Press.
- Bastidas-Arteaga, E., & Stewart, M. G. (2015). Damage risks and economic assessment of climate adaptation strategies for design of new concrete structures subject to chloride-induced corrosion. Structural Safety, 52, 40–53. doi:https://doi.org/10.1016/j.strusafe.2014.10.005
- Bertolini, L., Elsener, B., Pedeferri, P., & Polder, R. (2004). Corrosion of steel in concrete: Prevention, diagnosis, repair. Weinheim, Germany: Wiley.
- Biondini, F., Camnasio, E., & Palermo, A. (2014). Lifetime seismic performance of concrete bridges exposed to corrosion. Structure and Infrastructure Engineering, 10(7), 880–900. doi:https://doi.org/10.1080/15732479.2012.761248
- Broomfield, J. P. (2006). Corrosion of steel in concrete: understanding, investigation and repair. Oxon: CRC Press.
- Cao, C., Cheung, M. M. S., & Chan, B. Y. B. (2013). Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate. Corrosion Science, 69(24), 97–109. doi:https://doi.org/10.1016/j.corsci.2012.11.028
- Choe, D. E., Gardoni, P., Rosowsky, D., & Haukaas, T. (2008). Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion. Reliability Engineering & System Safety, 93(3), 383–393. doi:https://doi.org/10.1016/j.ress.2006.12.015
- Choe, D. E., Gardoni, P., Rosowsky, D., & Haukaas, T. (2009). Seismic fragility estimates for reinforced concrete bridges subject to corrosion. Structural Safety, 31(4), 275–283. doi:https://doi.org/10.1016/j.strusafe.2008.10.001
- Coronelli, D., & Gambarova, P. (2004). Structural assessment of corroded reinforced concrete beams: Modeling guidelines. Journal of Structural Engineering, 130(8), 1214–1224. doi:https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
- Czarnecki, A. A., & Nowak, A. S. (2008). Time-variant reliability profiles for steel girder bridges. Structural Safety, 30(1), 49–64. doi:https://doi.org/10.1016/j.strusafe.2006.05.002
- Deng, P., Zhang, C., Pei, S., & Jin, Z. (2018). Modeling the impact of corrosion on seismic performance of multi-span simply-supported bridges. Construction and Building Materials, 185, 193–205. doi:https://doi.org/10.1016/j.conbuildmat.2018.07.015
- Du, Y. G., Clark, L. A., & Chan, A. H. C. (2005a). Residual capacity of corroded reinforcing bars. Magazine of Concrete Research, 57(3), 135–147. doi:https://doi.org/10.1680/macr.2005.57.3.135
- Du, Y. G., Clark, L.A., & Chan, A. H. C. (2005b). Effect of corrosion on ductility of reinforcing bars. Magazine of Concrete Research, 57(7), 407–419. doi:https://doi.org/10.1680/macr.2005.57.7.407
- DuraCrete. (2000). General guidelines for durability design and redesign (Report number BE95-1347/R17). Prepared for DuraCrete: Probabilistic Performance-Based Durability Design of Concrete Structures, The European Union – Brite EuRam III.
- Edwards, R. V. (2006). Processing random data: Statistics for engineers and scientists. Singapore: World Scientific Publishing Company.
- El-Hassan, J., Bressolette, P., Chateauneuf, A., & El-Tawil, K. (2010). Reliability-based assessment of the effect of climatic conditions on the corrosion of RC structures subject to chloride ingress. Engineering Structures, 32(10), 3279–3287.
- Enright, M. P., & Frangopol, D. M. (1998). Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion. Engineering Structures, 20(11), 960–971. doi:https://doi.org/10.1016/S0141-0296(97)00190-9
- Fang, C., Lundgren, K., Chen, L., & Zhu, C. (2004). Corrosion influence on bond in reinforced concrete. Cement and Concrete Research, 34(11), 2159–2167. doi:https://doi.org/10.1016/j.cemconres.2004.04.006
- Geng, J., Easterbrook, D., Liu, Q., & Li, L. (2016). Effect of carbonation on release of bound chlorides in chloride- contaminated concrete. Magazine of Concrete Research, 68(7), 353–363. doi:https://doi.org/10.1680/jmacr.15.00234
- Ghosh, J., & Padgett, J. E. (2010). Aging considerations in the development of time-dependent seismic fragility curves. Journal of Structural Engineering, 136(12), 1497–1511. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0000260
- Ghosh, J., & Padgett, J. E. (2012). Impact of multiple component deterioration and exposure conditions on seismic vulnerability of concrete bridges. Earthquakes and Structures, 3(5), 649–673. doi:https://doi.org/10.12989/eas.2012.3.5.649
- Ghosh, J., & Sood, P. (2016). Consideration of time-evolving capacity distributions and improved degradation models for seismic fragility assessment of aging highway bridges. Reliability Engineering & System Safety, 154, 197–218. doi:https://doi.org/10.1016/j.ress.2016.06.001
- Guo, Y., Trejo, D., & Yim, S. (2015). New model for estimating the time-variant seismic performance of corroding RC bridge columns. Journal of Structural Engineering, 141(6), 04014158. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0001145
- Kashani, M. M., Crewe, A. J., & Alexander, N. A. (2013). Nonlinear stress–strain behaviour of corrosion-damaged reinforcing bars including inelastic buckling. Engineering Structures, 48, 417–429. doi:https://doi.org/10.1016/j.engstruct.2012.09.034
- Kayyali, O. A., & Haque, M. N. (1988). Effect of carbonation on the chloride concentration in pore solution of mortars with and without flyash. Cement and Concrete Research, 18(4), 636–648. doi:https://doi.org/10.1016/0008-8846(88)90056-7
- Kayyali, O. A., & Qasrawi, M. S. (1992). Chloride binding capacity in cement-fly-ash pastes. Journal of Materials in Civil Engineering, 4(1), 16–26. doi:https://doi.org/10.1061/(ASCE)0899-1561(1992)4:1(16)
- Komp, M. (1987). Atmospheric corrosion ratings of weathering steels―Calculation and significance. Materials Performance, 26(7), 42–44.
- Kwon, O. S., & Elnashai, A. (2006). The effect of material and ground motion uncertainty on the seismic vulnerability curves of RC structure. Engineering Structures, 28(2), 289–303. doi:https://doi.org/10.1016/j.engstruct.2005.07.010
- Li, K. (2017). Durability design of concrete structures: Phenomena, modeling, and practice. Singapore: Wiley.
- Liu, T., & Weyers, R. W. (1998). Modeling the dynamic corrosion process in chloride contaminated concrete structures. Cement and Concrete Research, 28(3), 365–379. doi:https://doi.org/10.1016/S0008-8846(98)00259-2
- Luping, T., & Nilsson, L. O. (1993). Chloride binding capacity and binding isotherms of OPC pastes and mortars. Cement and Concrete Research, 23(2), 247–253. doi:https://doi.org/10.1016/0008-8846(93)90089-R
- Mai, C., Konakli, K., & Sudret, B. (2017). Seismic fragility curves for structures using non-parametric representations. Frontiers of Structural and Civil Engineering, 11(2), 169–186. doi:https://doi.org/10.1007/s11709-017-0385-y
- Mander, J. B., Kim, D. K., Chen, S. S., & Premus, G. J. (1996). Response of steel bridge bearings to the reversed cyclic loading (Technical report NCEER 96-0014). Buffalo, NY.
- Mander, J. B., Priestley, M. J. N., & Park, R. (1988). Theoretical stress-strain model for confined concrete. Journal of Structural Engineering, 114(8), 1804–1826. doi:https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- Martin-Perez, B., Pantazopoulou, S. J., & Thomas, M. D. A. (2001). Numerical solution of mass transport equations in concrete structures. Computers and Structures, 79(13), 1251–1264.
- McKay, M. D. (1992). Latin hypercube sampling as a tool in uncertainty analysis of computer models. In Proceedings of the 24th conference on Winter simulation (pp. 557–564). doi:https://doi.org/10.1145/167293.167637
- McKenna, F., Fenves, G. L., & Scott, M. H. (2005). Open system for earthquake engineering simulation. Pacific Earthquake Engineering Research Center, Berkeley, University of California.
- Meda, A., Mostosi, S., Rinaldi, Z., & Riva, P. (2014). Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Engineering Structures, 76, 112–123. doi:https://doi.org/10.1016/j.engstruct.2014.06.043
- Melchers, R. E. (1999). Structural reliability analysis and prediction. New York, NY: Wiley.
- Mortagi, M., & Ghosh, J. (2020). Climate change considerations for seismic vulnerability assessment of aging highway bridges. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 6(1), 1–16.
- Nielsen, E. P., & Geiker, M. R. (2003). Chloride diffusion in partially saturated cementitious material. Cement and Concrete Research, 33(1), 133–138. doi:https://doi.org/10.1016/S0008-8846(02)00939-0
- Nielson, B. G. (2005). Analytical fragility curves for highway bridges in moderate seismic zones (Doctoral dissertation). Georgia Institute of Technology, Atlanta, GA.
- Nielson, B. G., & DesRoches, R. (2007). Seismic fragility methodology for highway bridges using a component level approach. Earthquake Engineering & Structural Dynamics, 36(6), 823–839.
- Padgett, J. E., & DesRoches, R. (2007a). Sensitivity of seismic response and fragility to parameter uncertainty. Journal of Structural Engineering, 133(12), 1710–1718. doi:https://doi.org/10.1061/(ASCE)0733-9445(2007)133:12(1710)
- Padgett, J. E., & DesRoches, R. (2007b). Bridge functionality relationships for improved seismic risk assessment of transportation networks. Earthquake Spectra, 23(1), 115–130. doi:https://doi.org/10.1193/1.2431209
- Padgett, J. E., & Desroches, R. (2008). Methodology for the development of analytical fragility curves for retrofitted bridges. Earthquake Engineering & Structural Dynamics, 37(8), 1157–1174.
- Polder, R. B., & De Rooij, M. R. (2005). Durability of marine concrete structures – Field investigations and modelling. Heron, 50(3), 133–154.
- Puatatsananon, W., & Saouma, V. E. (2005). Nonlinear coupling of carbonation and chloride diffusion in concrete. Journal of Materials in Civil Engineering, 17(3), 264–275. doi:https://doi.org/10.1061/(ASCE)0899-1561(2005)17:3(264)
- Ramanathan, K., DesRoches, R., & Padgett, J. E. (2012). A comparison of pre- and post-seismic design considerations in moderate seismic zones through the fragility assessment of multispan bridge classes. Engineering Structures, 45, 559–573. doi:https://doi.org/10.1016/j.engstruct.2012.07.004
- Rao, A. S., Lepech, M. D., Kiremidjian, A. S., & Sun, X. Y. (2017). Simplified structural deterioration model for reinforced concrete bridge piers under cyclic loading. Structure and Infrastructure Engineering, 13(1), 55–66. doi:https://doi.org/10.1080/15732479.2016.1198402
- Rix, G. J., & Fernandez, J. A. (2004). Earthquake ground motion simulation. Retrieved from www.ce.gatech.edu/_research/mae_ground_motion/
- Rokneddin, K., Ghosh, J., Dueñas-Osorio, L., & Padgett, J. E. (2013). Bridge retrofit prioritisation for ageing transportation networks subject to seismic hazards. Structure and Infrastructure Engineering, 9(10), 1050–1066. doi:https://doi.org/10.1080/15732479.2011.654230
- Saetta, A. V., Scotta, R. V., & Vitaliani, R. V. (1993). Analysis of chloride diffusion into partially saturated concrete. ACI Materials Journal, 90(5), 441–451.
- Saillio, M., Baroghel-Bouny, V., & Barberon, F. (2014). Chloride binding in sound and carbonated cementitious materials with various types of binder. Construction and Building Materials, 68, 82–91. doi:https://doi.org/10.1016/j.conbuildmat.2014.05.049
- Schmitt, G. (2009). Global needs for knowledge dissemination, research, and development in materials deterioration and corrosion control. New York: World Corrosion Organization.
- Sergi, G., Yu, S. W., & Page, C. L. (1992). Diffusion of chloride and hydroxyl ions in cementitious materials exposed to a saline. Magazine of Concrete Research, 25(3), 581–592.
- Shekhar, S., Ghosh, J., & Padgett, J. E. (2018). Seismic life-cycle cost analysis of ageing highway bridges under chloride exposure conditions: Modelling and recommendations. Structure and Infrastructure Engineering, 14(7), 941–966. doi:https://doi.org/10.1080/15732479.2018.1437639
- Silano, L. G. ed., & Brinckerhoff, P. (1993). Bridge inspection and rehabilitation. New York: Wiley.
- Simon, J., Bracci, J. M., & Gardoni, P. (2010). Seismic response and fragility of deteriorated reinforced concrete bridges. Journal of Structural Engineering, 136(10), 1273–1281. doi:https://doi.org/10.1061/(ASCE)ST.1943-541X.0000220
- Stewart, M. G. (2004). Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure. Structural Safety, 26(4), 453–470. doi:https://doi.org/10.1016/j.strusafe.2004.03.002
- Stewart, M. G., & Al-Harthy, A. (2008). Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis. Reliability Engineering & System Safety, 93(3), 373–382.
- Stewart, M. G., Wang, X., & Nguyen, M. N. (2011). Climate change impact and risks of concrete infrastructure deterioration. Engineering Structures, 33(4), 1326–1337. doi:https://doi.org/10.1016/j.engstruct.2011.01.010
- Suryavanshi, A. K., & Swamy, R. N. (1996). Stability of Friedel’s salt in carbonated concrete structural elements. Cement and Concrete Research, 26(5), 729–741. doi:https://doi.org/10.1016/S0008-8846(96)85010-1
- Titi, A., & Biondini, F. (2012). Validation of diffusion models for life-cycle assessment of concrete structures. In A. Strauss, D. M. Frangopol, & K. Bergmeister (Eds.), Life-cycle and sustainability of civil infrastructure systems. Third International Symposium on Life-Cycle Civil Engineering (IALCCE 2012), Vienna, Austria, October 3–6. London: CRC Press/Balkema.
- Titi, A., & Biondini, F. (2016). On the accuracy of diffusion models for life-cycle assessment of concrete structures. Structure and Infrastructure Engineering, 12(9), 1202–1215. doi:https://doi.org/10.1080/15732479.2015.1099110
- Tuutti, k. (1982). Analysis of pore solution squeezed out of cement paste and mortar. Nordic Concrete Research, 1, 25.1–25–16.
- U.S. Climate Data. (2019). U.S. Climate Data – Temperature, precipitation, sunshine and snowfall. Retrieved from https://www.currentresults.com/Weather/US/weather-averages-index.php
- Val, D. V., & Stewart, M. G. (2003). Life-cycle cost analysis of reinforced concrete structures in marine environments. Structural Safety, 25(4), 343–362. doi:https://doi.org/10.1016/S0167-4730(03)00014-6
- Vu, K. A. T., & Stewart, M. G. (2000). Structural reliability of concrete bridges including improved chloride-induced corrosion models. Structural Safety, 22(4), 313–333. doi:https://doi.org/10.1016/S0167-4730(00)00018-7
- Wang, X., & Liu, X. (2004). Modeling bond strength of corroded reinforcement without stirrups. Cement and Concrete Research, 34(8), 1331–1339. doi:https://doi.org/10.1016/j.cemconres.2003.12.028
- Wang, X., Stewart, M. G., & Nguyen, M. (2012). Impact of climate change on corrosion and damage to concrete infrastructure in Australia. Climatic Change, 110(3–4), 941–957. doi:https://doi.org/10.1007/s10584-011-0124-7
- Wang, Y., Nanukuttan, S., Bai, Y., & Basheer, P. A. M. (2017). Influence of combined carbonation and chloride ingress regimes on rate of ingress and redistribution of chlorides in concretes. Construction and Building Materials, 140, 173–183. doi:https://doi.org/10.1016/j.conbuildmat.2017.02.121
- Wen, Y. K., & Wu, C. L. (2001). Uniform hazard ground motions for mid-America cities. Earthquake Spectra, 17(2), 359–384. doi:https://doi.org/10.1193/1.1586179
- Xu, J. G., Wu, G., Feng, D. C., Cotsovos, D. M., & Lu, Y. (2020). Seismic fragility analysis of shear-critical concrete columns considering corrosion induced deterioration effects. Soil Dynamics and Earthquake Engineering, 134, 106165.
- Yoon, I.-S., Çopuroğlu, O., & Park, K.-B. (2007). Effect of global climatic change on carbonation progress of concrete. Atmospheric Environment, 41(34), 7274–7285. doi:https://doi.org/10.1016/j.atmosenv.2007.05.028
- Zhou, Y., Gencturk, B., Willam, K., & Attar, A. (2015). Carbonation-induced and chloride-induced corrosion in reinforced concrete structures. Journal of Materials in Civil Engineering, 27(9), 04014245. doi:https://doi.org/10.1061/(ASCE)MT.1943-5533.0001209
- Zhu, X., Zi, G., Cao, Z., & Cheng, X. (2016). Combined effect of carbonation and chloride ingress in concrete. Construction and Building Materials, 110, 369–380. doi:https://doi.org/10.1016/j.conbuildmat.2016.02.034
- Zhu, X., Zi, G., Lee, W., Kim, S., & Kong, J. (2016). Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete. Construction and Building Materials, 124, 667–680. doi:https://doi.org/10.1016/j.conbuildmat.2016.07.120
- Zibara, H. (2001). Binding of external chlorides by cement pastes (Doctoral dissertation). National Library of Canada.