References
- American Society of Civil Engineers (2010). Minimum design loads for buildings and other structures, ASCE 7-2010. Reston, VA: Author.
- Anagnos, T. (2001). Development of an electrical substation equipment performance database for evaluation of equipment fragilities (Technical Report PEER-2001/06). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- Bellorini, S., Salvetti, M., Bettinali, F., & Zafferani, G. (1998). Seismic qualification of transformer high voltage bushings. IEEE Transactions on Power Delivery, 13(4), 1208–1213. doi:https://doi.org/10.1109/61.714486
- Bender, A., & Farid, A. (2018). Seismic vulnerability of power transformer bushings complex structural dynamics and seismic amplification. Engineering Structures, 162, 1–10. doi:https://doi.org/10.1016/j.engstruct.2018.01.052
- Edwards, C. L. (2012). Haiti Mw 7.0 Earthquake of January 12, 2010: Lifeline Performance (TCLEE Monograph Series, No. 35). Reston, VA: American Society of Civil Engineers.
- Ellingwood, B. R., & Wen, Y. K. (2005). Risk-benefit-based design decisions for low-probability/high consequence earthquake events in mid-America. Progress in Structural Engineering & Materials, 7(2), 56–70.
- Filiatrault, A., & Matt, H. (2006). Seismic response of high voltage electrical transformer–bushing systems. Journal of Structural Engineering, 132(2), 287–295. doi:https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(287)
- Gilani, A. S., Chavez, J. W., Fenves, G. L., & Whittaker, A. S. (1998). Seismic evaluation of 196 kV porcelain transformer bushings (Technical Report PEER-1998/02). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- Gilani, A. S., Whittaker, A. S., Fenves, G. L., & Fujisaki, E. (1999a). Seismic evaluation and retrofit of 230 kV porcelain transformer bushings (Technical Report PEER-1999/14). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- Gilani, A. S., Whittaker, A. S., Fenves, G. L., & Fujisaki, E. (1999b). Seismic Evaluation of 550 kV Porcelain Transformer Bushings (Technical Report PEER-1999/05). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- He, C., Xie, Q., & Zhou, Y. (2019). Influence of flange on seismic performance of 1,100 kV ultra-high voltage transformer bushing. Earthquake Spectra, 35(1), 447–469. doi:https://doi.org/10.1193/122517EQS266M
- Institute of Electrical and Electronics Engineers. (2018). Recommended Practice for Seismic Design of Substations, IEEE 693 Standard. New York, NY: Author.
- International Electrotechnical Commission. (2016). Bushings-Seismic Qualification, IEC Technical Specification 61463. Geneva, Switzerland: Author.
- Kitayama, S., Constantinou, M. C., & Lee, D. (2016). Procedures and results of assessment of seismic performance of seismically isolated electrical transformers with due consideration for vertical isolation and vertical ground motion effects (Technical Report MCEER-16-0010). Buffalo, NY: Multidisciplinary and Multi-hazard Earthquake Engineering Research Center.
- Lagaros, N. D., Fotis, A. D., & Krikos, S. A. (2006). Assessment of seismic design procedures based on the total cost. Earthquake Engineering & Structural Dynamics, 35(11), 1381–1401.
- Liu, Y., Wotherspoon, L., Nair, N.K., & Blake, D. (2020). Quantifying the seismic risk for electric power distribution systems. Structure and Infrastructure Engineering. Advance Online Publication, doi:https://doi.org/10.1080/15732479.2020.1734030
- Ma, G. L., Xie, Q., & Whittaker, A. S. (2018). Physical and numerical simulations of the seismic response of a 1,100 kV power transformer bushing. Earthquake Spectra, 34(3), 1515–1541. doi:https://doi.org/10.1193/090417EQS172M
- Ministry of Housing and Urban-Rural Development of China (2010). Code for seismic design of buildings, GB50011-2010. Beijing: China Building Industry Press.
- Mitropoulou, C. C., Lagaros, N. D., & Papadrakakis, M. (2011). Life-cycle cost assessment of optimally designed reinforced concrete buildings under seismic actions. Reliability Engineering & System Safety, 96(10), 1311–1331.
- Mousazadeh, M., Pourreza, F., Basim, M. C., & Chenaghlou, M. R. (2020). An efficient approach for LCC-based optimum design of lead-rubber base isolation system via FFD and analysis of variance (ANOVA). Bulletin of Earthquake Engineering, 18(4), 1805–1827. doi:https://doi.org/10.1007/s10518-019-00754-6
- Murota, N., Feng, Q., & Liu, G. Y. (2006). Earthquake simulator testing of base-isolated power transformers. IEEE Transactions on Power Delivery, 21(3), 1291–1298. doi:https://doi.org/10.1109/TPWRD.2006.874586
- Northwest Electric Power Design Institute of China. (2013). Code for seismic design of electrical installations, GB50260-2013. Xi’an: Author.
- Oikonomou, K., Constantinou, M. C., Reinhorn, A. M., & Kempner, L. Jr. (2016). Seismic isolation of high voltage electrical power transformer (Technical Report MCEER-16-0006) Buffalo, NY: Multidisciplinary and Multi-hazard Earthquake Engineering Research Center.
- Pacific Earthquake Engineering Research Center. (2001). Data from: PEER ground motion database [Database]. Retrieved from https://ngawest2.berkeley.edu/.
- Saadeghvaziri, M. A., Feizi, B., Kempner, L., & Alston, D. (2010). On seismic response of substation equipment and application of base isolation to transformers. IEEE Transactions on Power Delivery, 25(1), 177–186.
- Schiff, A. J. (1995). Northridge earthquake, lifeline performance and post-earthquake response (TCLEE Monograph Series, No. 8). Reston, VA: American Society of Civil Engineers.
- Siraj, T., Tesfamariam, S., & Duenas-Osorio, L. (2015). Seismic risk assessment of high voltage transformers using Bayesian belief networks. Structure and Infrastructure Engineering, 11(7), 929–943. doi:https://doi.org/10.1080/15732479.2014.921826
- Takhirov, S. M., Fenves, G. L., Fujisaki, E., & Clyde, D. (2004). Input motion for earthquake simulator qualification of electrical substation equipment (Technical Report PEER-2004/07). Berkeley, CA: Pacific Earthquake Engineering Research Center.
- Tokyo Electric Power Co. (2012). Damage and restoration measures for electrical in the 2011 offshore Pacific Coast Tohoku Earthquake. Tokyo: Author.
- Wang, C., Feng, K.R., Zhang, H., & Li, Q.W. (2019). Seismic performance assessment of electric power systems subjected to spatially correlated earthquake excitations. Structure and Infrastructure Engineering, 15(3), 351–361. doi:https://doi.org/10.1080/15732479.2018.1547766
- Warn, G. P., & Ryan, K. L. (2012). A review of seismic isolation for buildings: historical development and research needs. Buildings, 2(3), 300–325. doi:https://doi.org/10.3390/buildings2030300
- Wen, Y. K., & Kang, Y. J. (2001). Minimum building life-cycle cost design criteria. I: Methodology. Journal of Structural Engineering, 127(3), 330–337. doi:https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(330)
- Xie, Q., He, C., Yang, Z. Y., & Xue, S. T. (2019b). Influence of flexible conductors on the seismic responses of interconnected electrical equipment. Engineering Structures, 191, 148–161. doi:https://doi.org/10.1016/j.engstruct.2019.04.050
- Xie, Q., Wen, J. Y., & Pang, Z. (2020). Base isolation and its cost-effective analysis on large transformer-bushing system. High Voltage Engineering, 46(3), 890–897.
- Xie, Q., Yang, Z. Y., He, C., & Xue, S. T. (2019a). Seismic performance improvement of a slender composite ultra-high voltage bypass switch using assembled base isolation. Engineering Structures, 194, 320–333. doi:https://doi.org/10.1016/j.engstruct.2019.05.055
- Yu, Y. Q., Li, G. F., Li, P., Zhu, Q. J., Yuan, D. L., Wang, C. Y., … Liu, J. M. (2008). Investigation and analysis of electric equipment damage in Sichuan power grid caused by Wenchuan earthquake. Power System Technology, 32(11), 1–6.
- Zareei, S. A., Hosseini, M., & Ghafory-Ashtiany, M. (2016). Seismic failure probability of a 400 kV power transformer using analytical fragility curves. Engineering Failure Analysis, 70, 273–289. doi:https://doi.org/10.1016/j.engfailanal.2016.09.007