Investigation and treatment of bearing diseases for typical expressway and high-speed railway bridges in Eastern China: a field practice campaign

References

• Aria, M., & Akbari, R. (2013). Inspection, condition evaluation and replacement of elastomeric bearings in road bridges. Structure and Infrastructure Engineering, 9(9), 918–934. doi:10.1080/15732479.2011.638171
   Web of Science ®Google Scholar
• Bangash, M. (1999). Prototype bridge structures: Analysis and design. London: Thomas Telford.
   Google Scholar
• Chen, Z., Fang, H., Ke, X., & Zeng, Y. (2016). A new method to identify bridge bearing damage based on Radial Basis Function Neural Network. Earthquakes and Structures, 11(5), 841–859. doi:10.12989/eas.2016.11.5.841
   Web of Science ®Google Scholar
• Cheng, X. X., Ma, F. B., Chen, J. Q., Dong, B., & Wu, G. (2020). Bearing repair and monitoring for Poyanghu cable-stayed bridge. Advances in Civil Engineering, 2020, 1–15. doi:10.1155/2020/8819360
   Web of Science ®Google Scholar
• Cui, M., Wu, G., Chen, Z., Dang, J., Zhou, M., & Feng, D. (2021). Geometric attention regularization enhancing convolutional neural networks for bridge rubber bearing damage assessment. Journal of Performance of Constructed Facilities, 35(5), 04021061. doi:10.1061/(ASCE)CF.1943-5509.0001634
   Web of Science ®Google Scholar
• Cui, M., Wu, G., Dang, J., Chen, Z., & Zhou, M. (2022). Deep learning-based condition assessment for bridge elastomeric bearings. Journal of Civil Structural Health Monitoring, 12(2), 245–261. doi:10.1007/s13349-021-00540-6
   Web of Science ®Google Scholar
• DB32/T2172-2012 (2012). Technical standards for faults judgment of rubber bearings of highway bridges, Beijing: Standardization Administration of the People’s Republic of China (SAC). (in Chinese)
   Google Scholar
• EN 1337-1 (2000). Structural bearings - Part 1: General design rules, Brussels: European Committee for Standardisation (CEN).
   Google Scholar
• Fragnet, M., & Seantier, J. (2005). La structure de la Norme EN 1337. Les appareils d’appui structuraux: la mise en application des normes européennes. Paris: ENPC/SA Ponts Formation Edition. (in French)
   Google Scholar
• Freire, L. M. R., & de Brito, J. (2006). Relationship between bearings type and their most common anomalies. In P. J. S. Cruz, D. M. Frangopol, & L. C. Neves (Eds.), Proceedings of the 3th International Conference on Bridge Maintenance, Safety and Management, Life Cycle Performance and Cost (pp. 205–206). Porto, Portugal: Taylor & Francis Group.
   Google Scholar
• Freire, L. M. R., de Brito, J., & Correia, J. R. (2014). Management system for road bridge structural bearings. Structure and Infrastructure Engineering, 10(8), 1068–1086. doi:10.1080/15732479.2013.788524
   Web of Science ®Google Scholar
• Freire, L. M. R., de Brito, J., & Correia, J. R. (2015). Inspection survey of support bearings in road bridges. Journal of Performance of Constructed Facilities, 29(4), 04014098. doi:10.1061/(ASCE)CF.1943-5509.0000569
   Web of Science ®Google Scholar
• Hart, J., Asl, A., & Fletcher, J. (2017). Bridge bearing replacement using flat jacks. In 10th Austroads Bridge Conference, Melbourne, Australia.
   Google Scholar
• Heymsfield, E., Mcdonald, J., & Avent, R. R. (2001). Neoprene bearing pad slippage at Louisiana bridges. Journal of Bridge Engineering, 6(1), 30–36. doi:10.1061/(ASCE)1084-0702(2001)6:1(30)
   Google Scholar
• Hou, S., & Wu, G. (2019). A low-cost IoT-based wireless sensor system for bridge displacement monitoring. Smart Materials and Structures, 28(8), 085047. doi:10.1088/1361-665X/ab2a31
   Web of Science ®Google Scholar
• Huth, O., & Khbeis, H. (2007). Pot bearings behavior after 32 years of service: In situ and laboratory tests. Engineering Structures, 29(12), 3352–3363. doi:10.1016/j.engstruct.2007.08.024
   Web of Science ®Google Scholar
• JTG D60-2015 (2015). General specifications for design of highway bridges and culverts, Beijing: Standardization Administration of the People’s Republic of China (SAC). (in Chinese)
   Google Scholar
• JTG/T H21-2011 (2011). Standards for technical condition evaluation of highway bridges. Beijing: Standardization Administration of the People’s Republic of China (SAC). (in Chinese)
   Google Scholar
• Kang, X. W. (2018). Bridge bearings performance evaluation and remaining life prediction technology. Beijing: People’s Communications Press. (in Chinese)
   Google Scholar
• Lindquist-Hoeke, L. J., Moser, R. D., Singh, P. M., Kahn, L. F., & Kurtis, K. E. (2009). Degradation of steel girder bridge bearing systems by corrosion. In Corrosion 2009: NACE Conference & Exposition, Atlanta, GA.
   Google Scholar
• Ma, F., Li, H., Hou, S., Kang, X., & Wu, G. (2022). Defect investigation and replacement implementation of bearings for long-span continuous box girder bridges under operating high-speed railway networks: a case study. Structure and Infrastructure Engineering, 18(5), 678–693. doi:10.1080/15732479.2020.1867589.
   Web of Science ®Google Scholar
• Mitoulis, S. A. (2015). Uplift of elastomeric bearings in isolated bridges subjected to longitudinal seismic excitations. Structure and Infrastructure Engineering, 11(12), 1600–1615. doi:10.1080/15732479.2014.983527.
   Web of Science ®Google Scholar
• Niemierko, A. (2001). Bridge bearings pathological behavior: Polish case history. In 5th World Congress on Joints, Bearings and Seismic Systems for Concrete Structures, American Concrete Institute, Rome, Italy.
   Google Scholar
• Niemierko, A. (2016). Modern bridge bearings and expansion joints for road bridges. In L. Rafalski & A. Zofka (Eds.), Transportation Research Procedia (14, pp. 4040–4049). Warsaw, Poland: Elsevier Science BV. doi:10.1016/j.trpro.2016.05.501
   Google Scholar
• Park, Y. S., Kim, S., Kim, N., & Lee, J. J. (2019). Evaluation of bridge support condition using bridge responses. Structural Health Monitoring, 18(3), 767–777. doi:10.1177/1475921718773672
   Web of Science ®Google Scholar
• Peel, H., Luo, S., Cohn, A. G., & Fuentes, R. (2018). Localisation of a mobile robot for bridge bearing inspection. Automation in Construction, 94, 244–256. doi:10.1016/j.autcon.2018.07.003
   Web of Science ®Google Scholar
• Peng, L. Q., Lin, D. W., Liu, L. F., & Wang, J. (2019). An analysis of design and result of low-temperature spherical bearing Test. Railway Quality Control, 2, 20–24. (in Chinese)
   Google Scholar
• Qin, S. Q., & Gao, Z. Y. (2017). Developments and prospects of longspan high-speed railway bridge technologies in China. Engineering, 3(6), 787–794. doi:10.1016/j.eng.2017.11.001
   Web of Science ®Google Scholar
• Redpath, J. (2007). Pendel bearing replacement at A9 Kessock Bridge, Scotland. Proceedings of the Institution of Civil Engineers - Bridge Engineering, 160(4), 195–203. doi:10.1680/bren.2007.160.4.195.
   Google Scholar
• Shaw, P., & Stevens, N. (2000). Bearing replacement on the Victoria Bridge. In 4th Austroads Bridge Conference, Adelaide, Australia.
   Google Scholar
• TB10621-2014 (2014). Code for design of high speed railway, Beijing: Standardization Administration of the People’s Republic of China (SAC). (in Chinese)
   Google Scholar
• TB/T2820.3-1997 (1997). Standard for assessment of deterioration of railway Bridges and tunnels - Part 3: Bearings, Beijing: Standardization Administration of the People’s Republic of China (SAC). (in Chinese)
   Google Scholar
• Tubaldi, E., Mitoulis, S. A., & Ahmadi, H. (2018). Comparison of different models for high damping rubber bearings in seismically isolated bridges. Soil Dynamics and Earthquake Engineering, 104, 329–345. doi:10.1016/j.soildyn.2017.09.017
   Web of Science ®Google Scholar
• Van Lund, J. A. (1995). Bridge bearing replacement. In 4th International Bridge Engineering Conference, Washington, DC.
   Google Scholar
• Wang, S. Z. (2003). Study on failure conditions and service life of railway plate rubber bearing. Railway Engineering, 7, 26–29. (in Chinese)
   Google Scholar
• Wang, W., Chengyu, L., Rens, K. L., & Nogueira, C. L. (2020). Failure analysis of pot bearings in a curved viaduct. Journal of Performance of Constructed Facilities, 34(5), 04020079. doi:10.1061/(ASCE)CF.1943-5509.0001463.
   Web of Science ®Google Scholar
• Xiang, N., Alam, M. S., & Li, J. (2018). Shake table studies of a highway bridge model by allowing the sliding of laminated-rubber bearings with and without restraining devices. Engineering Structures, 171, 583–601. doi:10.1016/j.engstruct.2018.05.121
   Web of Science ®Google Scholar
• Xiang, N., Alam, M. S., & Li, J. (2019). Yielding steel dampers as restraining devices to control seismic sliding of laminated rubber bearings for highway bridges: analytical and experimental study. Journal of Bridge Engineering, 24(11), 04019103. doi:10.1061/(ASCE)BE.1943-5592.0001487
   Web of Science ®Google Scholar
• Xiang, N., Goto, Y., Alam, M. S., & Li, J. (2021). Effect of bonding or unbonding on seismic behavior of bridge elastomeric bearings: lessons learned from past earthquakes in China and Japan and inspirations for future design. Advances in Bridge Engineering, 2(1), 1–17. doi:10.1186/s43251-021-00036-9
   Google Scholar
• Xiang, N., & Li, J. (2016). Seismic performance of highway bridges with different transverse unseating-prevention devices. Journal of Bridge Engineering, 21(9), 04016045. doi:10.1061/(ASCE)BE.1943-5592.0000909
   Web of Science ®Google Scholar
• Xiang, N., & Li, J. (2017). Experimental and numerical study on seismic sliding mechanism of laminated-rubber bearings. Engineering Structures, 141, 159–174. doi:10.1016/j.engstruct.2017.03.032
   Web of Science ®Google Scholar
• Xiang, N., & Li, J. (2018). Effect of exterior concrete shear keys on the seismic performance of laminated rubber bearing-supported highway bridges in China. Soil Dynamics and Earthquake Engineering, 112, 185–197. doi:10.1016/j.soildyn.2018.04.033
   Web of Science ®Google Scholar
• Yakut, A., & Yura, J. A. (2002a). Evaluation of elastomeric bearing performance at low temperatures. Journal of Structural Engineering, 128(8), 995–1002. doi:10.1061/(ASCE)0733-9445(2002)128:8(995).
   Web of Science ®Google Scholar
• Yakut, A., & Yura, J. A. (2002b). Parameters influencing performance of elastomeric bearings at low temperatures. Journal of Structural Engineering, 128(8), 986–994. doi:10.1061/(ASCE)0733-9445(2002)128:8(986).
   Web of Science ®Google Scholar
• Yanagihara, M., Matsuzawa, T., Kudo, M., & Turker, T. (2000). Replacement of bearings in the Golden Horn Bridge. Structural Engineering International, 10(2), 121–123. doi:10.2749/101686600780557857
   Google Scholar
• Yang, F. (2021). Analysis of basic mechanical performances test results for spherical bearings of railway bridge. Railway Engineering, 61(1), 23–26. (in Chinese)
   Google Scholar
• Yu, X. H., Ma, F. B., Li, L., Li, H. L., & Wu, G. (2019). Construction technology of bearing replacement of highway bridge under uninterrupted traffic. Transpo World, 487/488/489, 124–127. (in Chinese)
   Google Scholar
• Yuan, D. Y. (2013). Bridge rubber bearing performance at low-temperature in cold region. (Master's thesis). Harbin, China: Northeast Forestry University. (in Chinese)
   Google Scholar
• Zheng, Y., Gao, F., Shen, X. J., & Zhang, Y. N. (2014). Durability research and safety evaluation of plate natural rubber bearing. Beijing: China Building Materials Industry Press. (in Chinese)
   Google Scholar
• Zhuang, J. S. (2015). Bridge bearings. Beijing: China Railway Publishing House. (in Chinese)
   Google Scholar