References
- Ameli, M. J., Brown, D. N., Parks, J. E., & Pantelides, C. P. (2016). Seismic column-to-footing connections using grouted splice sleeves. ACI Structural Journal, 113(5), 1021–1030. doi:10.14359/51688755
- Ameli, M. J., Parks, J. E., Brown, D. N., & Pantelides, C. P. (2015). Seismic evaluation of grouted splice sleeve connections for reinforced precast concrete column-to-cap beam joints in accelerated bridge construction. PCI Journal, 60(2), 80–103. doi:10.15554/pcij.03012015.80.103
- Amey, S. L., Johnson, D. A., Miltenberger, M. A., & Farzam, H. (1998). Predicting the service life of concrete marine structures: An environment methodology. ACI Structural Journal, 95(2), 205–214.
- Biswas, R. K., Iwanami, M., Chijiwa, N., & Nakayama, K. (2021). Structural assessment of the coupled influence of corrosion damage and seismic force on the cyclic behaviour of RC columns. Construction and Building Materials, 304, 124706. doi:10.1016/j.conbuildmat.2021.124706
- Brenes, F. J., Wood, S. L., & Kreger, M. E. (2006). Anchorage requirements for grouted vertical-duct connectors in precast cap systems: A summary. Center for Transportation Research, Project Summary Report 0-4176, Austin, TX.
- Filippou, F. C., Bertero, V. V., & Popov, E. P. (1983). Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints. Berkeley, CA: Earthquake Engineering Research Center.
- General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China (AQSIQ). (2013). Test methods of steel for reinforcement of concrete (GB/T 28900-2012). Beijing: Standards Press of China.
- Guo, T., Yang, J., Wang, W., & Li, C. (2022). Experimental investigation on connection performance of fully-grouted sleeve connectors with various grouting defects. Construction and Building Materials, 327, 126981. doi:10.1016/j.conbuildmat.2022.126981
- Haraldsson, O. S., Janes, T. M., Eberhard, M. O., & Stanton, J. F. (2013). Seismic resistance of socket connection between footing and precast column. Journal of Bridge Engineering, 18(9), 910–919. doi:10.1061/(ASCE)BE.1943-5592.0000413
- Kent, D. C., & Park, R. (1971). Flexural members with confined concrete. Journal of the Structural Division, 97(7), 1969–1990. doi:10.1061/JSDEAG.0002957
- Li, F., & Shen, Y. (2017). Full-scale test of the hydration heat and the curing method of the wet joints of a precast segmental pier of a bridge. European Journal of Environmental and Civil Engineering, 21(3), 348–370. doi:10.1080/19648189.2015.1119063
- Li, Q., Dong, Z., He, Q., Fu, C. Q., & Jin, X. Y. (2022). Effects of reinforcement corrosion and sustained load on mechanical behaviour of reinforced concrete columns. Materials, 15(10), 3590. doi:10.3390/ma15103590
- Luo, X. Y., Liang, Y., & Zhang, Y. F. (2014). Study on mechanical property and constitutive relation of corroded steel bars under tension cyclic loading. Journal of Hunan University (Science and Technology), 41(11), 81–86.
- Mazzoni, S., McKenna, F., Scott, M. H., & Fenves, G. L. (2006). Opensees command language manual. Berkeley, CA: Pacific Earthquake Engineering Research Center (PEER).
- Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD). (2009). Standard for test methods of long-term performance and durability of ordinary concrete (GB/T 50082-2009). Beijing: China Architecture & Building Press.
- Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD). (2015a). Code for design of concrete structures (GB 50010-2010). Beijing: China Architecture & Building Press.
- Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD). (2015b). Technical specification for grout sleeve splicing of rebars (JGJ 355-2015). Beijing: China Architecture & Building Press.
- Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD). (2019). Standard for test methods of concrete physical and mechanical properties (GB/T 50081-2019). Beijing: China Architecture & Building Press.
- Mohebbi, A., Saiidi, M. S., & Itani, A. M. (2018). Shake table studies and analysis of a precast two-column bent with advanced materials and pocket connections. Journal of Bridge Engineering, 23(7), 04018046. doi:10.1061/(ASCE)BE.1943-5592.0001247
- Ou, Y. C., Wang, P. H., Tsai, M. S., Chang, K. C., & Lee, G. C. (2010). Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions. Journal of Structural Engineering, 136(3), 255–264. doi:10.1061/(ASCE)ST.1943-541X.0000110
- Park, R. (1989). Evaluation of ductility of structures and structural assemblages from laboratory testing. Bulletin of the New Zealand Society for Earthquake Engineering, 22(3), 155–166. doi:10.5459/bnzsee.22.3.155-166
- Qu, H., Li, T., Wang, Z., Wei, H., Shen, J., & Wang, H. (2018). Investigation and verification on seismic behaviour of precast concrete frame piers used in real bridge structures: Experimental and numerical study. Engineering Structures, 154, 1–9. doi:10.1016/j.engstruct.2017.10.069
- Rajput, A. S., & Sharma, U. K. (2019). Seismic upgrade of corroded confined reinforced concrete columns using composite materials. ACI Materials Journal, 116(5), 37–48. doi:10.14359/51716825
- Scott, B. D., Park, R., & Priestly, M. J. N. (1982). Stress-strain behaviour of concrete confined by overlapping hoops at low and high strain rates. ACI Journal, 79(1), 13–27.
- State Administration for Market Regulation of the People’s Republic of China (SAMR). (2021). Test method of cement mortar strength (ISO method) (GB/T 17671-2021). Beijing: Standards Press of China.
- Wang, S., Xu, W., Wang, J., Xin, G., Chen, Y., Zhao, Z., & Bai, Y. (2021). Experimental research on anti-seismic reinforcement of fabricated concrete pier connected by grouting sleeve based on CFRP and PET materials. Engineering Structures, 245, 112838. doi:10.1016/j.engstruct.2021.112838
- Xu, F., Wang, K., Wang, S. G., Li, W. W., Liu, W. Q., & Du, D. S. (2018). Experimental bond behaviour of deformed rebars in half-grouted sleeve connections with insufficient grouting defect. Construction and Building Materials, 185, 264–274. doi:10.1016/j.conbuildmat.2018.07.050
- Xu, Y. M., He, S. H., Guan, P. D., Mosallam, A. S., Zeng, J. J., & Wan, Z. Y. (2022). Shear behaviour of flexible-sleeve perfobond strip connectors: Experimental and analytical studies. Engineering Structures, 264, 114380. doi:10.1016/j.engstruct.2022.114380
- Xu, Y., Zeng, Z., Wang, Z., & Ge, J. (2021). Experimental studies of embedment length of precast bridge pier with socket connection to pile cap. Engineering Structures, 233, 111906. doi:10.1016/j.engstruct.2021.111906
- Yalciner, H., & Kumbasaroglu, A. (2020). Experimental evaluation and modeling of corroded reinforced concrete columns. ACI Structural Journal, 117(4), 61–76.
- Yang, J., Guo, T., & Chai, S. (2020). Experimental and numerical investigation on seismic behaviours of beam-column joints of precast prestressed concrete frame under given corrosion levels. Structures, 27, 1209–1221. doi:10.1016/j.istruc.2020.07.007
- Yang, J., Guo, T., Chai, S., & Li, A. (2019). Cyclic tests on beam-column joints of SCOPE system with different key slot lengths and corrosion levels. Engineering Structures, 201, 109406. doi:10.1016/j.engstruct.2019.109406
- Yang, J., Guo, T., Luo, D. Z., & Liu, Z. X. (2021). Multiscale modeling and seismic fragility analysis of corroded precast concrete frame. Journal of Performance of Constructed Facilities, 35(1), 04020128. doi:10.1061/(ASCE)CF.1943-5509.0001535
- Yee, A. A. (1968). Splice sleeve for reinforcing bars. United States Patent, US3540763.
- Yu, Q., Zhang, L., Bai, S. H., Fan, B. X., Chen, Z. H., & Li, L. Z. (2021). Experimental study on seismic behaviour of precast frame columns with vertical reinforcement spliced with grouted sleeve lapping connectors. Advances in Civil Engineering, 2021, 1–21. doi:10.1155/2021/1549303
- Yu, Q., Zhang, L., Tang, P. Y., Li, L. Z., Zhang, X. K., Fan, B. X., … Chen, Z. H. (2022). Experimental study and in-depth tensile mechanism analysis of grouted sleeve lapping conectors. Latin American Journal of Solids and Structures, 19(2), e428. doi:10.1590/1679-78256935
- Yuan, Z., Fang, C., Parsaeimaram, M., & Yang, S. (2017). Cyclic behaviour of corroded reinforced concrete bridge Piers. Journal of Bridge Engineering, 22(7), 04017020. doi:10.1061/(ASCE)BE.1943-5592.0001043
- Zhang, D., Zeng, Y., Fang, M., & Jin, W. (2019). Service life prediction of precast concrete structures exposed to chloride environment. Advances in Civil Engineering, 2019, 1–14. doi:10.1155/2019/3216328
- Zhang, Z. R., Jiang, S. F., Cai, W. X., & Zhang, C. M. (2022). Effects of grout compactness on the tensile behaviour of grouted splice sleeve connectors. Applied Sciences, 12(9), 4595. doi:10.3390/app12094595
- Zhao, Y. X., Wang, Y. Z., & Dong, J. F. (2020). Experimental study and analytical model of concrete cover spalling induced by steel corrosion. Journal of Structural Engineering, 146(6), 04020098. doi:10.1061/(ASCE)ST.1943-541X.0002647
- Zhao, Y. X., Wang, Y. Z., & Dong, J. F. (2021). Prediction of corrosion-induced concrete cracking under external loading and stirrup constraint. Construction and Building Materials, 266(Part B), 121053. doi:10.1016/j.conbuildmat.2020.121053
- Zhou, Q., Liu, Y., & Li, Y. (2022a). Load transfer mechanism of precast concrete piers with demountable connections. Engineering Structures, 261, 114287. doi:10.1016/j.engstruct.2022.114287
- Zhou, Y., Yang, J., Luo, X., Hwang, H. J., Chen, H., Sun, J., … Kang, S. M. (2022b). Pendulum impact loading tests of precast concrete columns with various column base connections. Engineering Structures, 252, 113736. doi:10.1016/j.engstruct.2021.113736