References
- Abbas, N., Riaz, M., & Does, R. J. M. M. (2013). Mixed exponentially weighted moving average-cumulative sum charts for process monitoring. Quality and Reliability Engineering International, 29(3), 345–356. https://doi.org/https://doi.org/10.1002/qre.1385
- Abbas, N. (2018). Homogeneously weighted moving average control chart with an application in substrate manufacturing process. Computers & Industrial Engineering, 120, 460–470. https://doi.org/https://doi.org/10.1016/j.cie.2018.05.009
- Abid, M., Nazir, H. Z., Riaz, M., & Lin, Z. (2018). In-control robustness comparison of different control charts. Transactions of the Institute of Measurement and Control, 48(13), 3860–3871. https://doi.org/https://doi.org/10.1177/0142331217734302
- Abujiya, M. R., Lee, M. H., & Riaz, M. (2014). Improving the performance of exponentially weighted moving average control charts. Quality and Reliability Engineering International, 30(4), 571–590. https://doi.org/https://doi.org/10.1002/qre.1509
- Adeoti, O. A., & Malela-Majika, J. C. (2020). Double exponentially weighted moving average control chart with supplementary runs-rules. Quality Technology & Quantitative Management, 17(2), 149–172. https://doi.org/https://doi.org/10.1080/16843703.2018.1560603
- Alevizakos, V., Chatterjee, K., & Koukouvinos, C. (2021). The triple exponentially weighted moving average control chart. Quality Technology & Quantitative Management, 18(3), 326–354. https://doi.org/https://doi.org/10.1080/16843703.2020.1809063
- Borror, C. M., Montgomery, D. C., & Runger, G. C. (1999). Robustness of the EWMA control chart to non-normality. Journal of Quality Technology, 31(3), 309–316. https://doi.org/https://doi.org/10.1080/00224065.1999.11979929
- Brook, D., & Evans, D. A. (1972). An approach to the probability distribution of CUSUM run length. Biometrika, 59(3), 539–549. https://doi.org/https://doi.org/10.1093/biomet/59.3.539
- Capizzi, G., & Masarotto, G. (2003). An adaptive exponentially weighted moving average control chart. Technometrics, 45(3), 199–207. https://doi.org/https://doi.org/10.1198/004017003000000023
- Chan, L. K., & Zhang, J. (2000). Some issues in the design of EWMA Charts. Communications in Statistics - Simulation and Computation, 29(1), 201–217. https://doi.org/https://doi.org/10.1080/03610910008813610
- Crowder, S. V. (1987). A simple method for studying run - length distributions of exponentially weighted moving average charts. Technometrics, 29(4), 401–407. doi:https://doi.org/10.1080/00401706.1987.10488267.
- Crowder, S. V. (1989). Design of exponentially weighted moving average schemes. Journal of Quality Technology, 21(3), 155–162. https://doi.org/https://doi.org/10.1080/00224065.1989.11979164
- Human, S. W., Kritzinger, P., & Chakraborti, S. (2011). Robustness of the EWMA control chart for individual observations. Journal of Applied Statistics, 38(10), 2071–2087. https://doi.org/https://doi.org/10.1080/02664763.2010.545114
- Khoo, M. B. C., & Teh, S. Y. (2009). A study on the effects of trends due to inertial on EWMA and CUSUM charts. Journal of Quality Measurement and Analysis, 5(2), 73–80.
- Klein, M. (1996). Composite Shewhart-EWMA statistical control schemes. IIE Transactions, 28(6), 475–481. https://doi.org/https://doi.org/10.1080/07408179608966294
- Lucas, J. M., & Saccucci, M. S. (1990). Exponentially weighted moving average control schemes: Properties and enhancements. Technometrics, 32(1), 1–12. https://doi.org/https://doi.org/10.1080/00401706.1990.10484583
- Lucas, J. M. (1982). Combined Shewhart-CUSUM quality control schemes. Journal of Quality Technology, 14(2), 51–59. https://doi.org/https://doi.org/10.1080/00224065.1982.11978790
- Montgomery, D. C. (2013). Introduction to Statistical Quality Control (7th ed ed ed.). Wiley.
- Page, E. S. (1954). Continuous inspection schemes. Biometrika, 41(1), 100–115. https://doi.org/https://doi.org/10.1093/biomet/41.1-2.100
- Roberts, S. W. (1959). Control chart tests based on geometric moving averages. Technometrics, 1(3), 239–250. https://doi.org/https://doi.org/10.1080/00401706.1959.10489860
- Rocke, D. M. (1989). Robust control charts. Technometrics, 31(2), 173–184. https://doi.org/https://doi.org/10.1080/00401706.1989.10488511
- Shamma, S. E., & Shamma, A. K. (1992). Development and evaluation of control charts using double exponentially weighted moving averages. International Journal of Quality & Reliability Management, 9(6), 18–25. https://doi.org/https://doi.org/10.1108/02656719210018570
- Sheu, S. H., & Hsieh, Y. T. (2009). The extended GWMA control chart. Journal of Applied Statistics, 36(2), 135–147. https://doi.org/https://doi.org/10.1080/02664760802443913
- Sheu, S. H., & Lin, T. C. (2003). The generally weighted moving average control chart for detecting small shifts in the process mean. Quality Engineering, 16(2), 209–231. https://doi.org/https://doi.org/10.1081/QEN-120024009
- Shewhart, W. A. (1926). Quality control charts. Bell System Technical Journal, 5(4), 593–603. https://doi.org/https://doi.org/10.1002/j.1538-7305.1926.tb00125.x
- Steiner, S. H. (1999). EWMA control charts with time-varying control limits and fast initial response. Journal of Quality Technology, 31(1), 75–86. https://doi.org/https://doi.org/10.1080/00224065.1999.11979899
- Woodall, W. H., & Mahmoud, M. A. (2005). The inertial properties of quality control charts. Technometrics, 47(4), 425–436. https://doi.org/https://doi.org/10.1198/004017005000000256
- Zafar, R. F., & Riaz, M. (2020). On handling inertia problem of memory charts using break approach. Quality and Reliability Engineering International, 36(5), 1708–1715. https://doi.org/https://doi.org/10.1002/qre.2654
- Zaman, B., Riaz, M., Abbas, N., & Does, R. J. M. M. (2015). Mixed cumulative sum-exponentially weighted moving average control charts: An efficient way of monitoring process location. Quality and Reliability Engineering International, 31(8), 1407–1421. https://doi.org/https://doi.org/10.1002/qre.1678
- Zhang, L., & Chen, G. (2005). An extended EWMA mean chart. Quality Technology & Quantitative Management, 2(1), 39–52. https://doi.org/https://doi.org/10.1080/16843703.2005.11673088
- Zhao, Y., Tsung, F., & Wang, Z. (2005). Dual CUSUM control schemes for detecting a range of mean shifts. IIE Transactions, 37(11), 1047–1057. https://doi.org/https://doi.org/10.1080/07408170500232321