References
- Ananthakrishnan, V. “Part-to-Art: Basis for a Systematic Geometric Design Tool for Surface Micro-machined MEMS”, Master Thesis, Department of Mechanical, Industrial, and Manufacturing Engineering, University of Toledo, Toledo, Ohio, 2000
- Ananthakrishnan V, Sarma R, Ananthasuresh GK. “Part-to-Art: The Basis for a Systematic Geometric Design Tool for Surface Micro-machined MEMS”, Proceedings of the ASME Design Automation Conference, DETC2000/DAC-14251, Spetember 10–13, 2000, Baltimore, Maryland.
- Ananthakrishnan V, Sarma R, Ananthasuresh G K. “Systematic mask synthesis for surface micromachined microelectromechanical systems”, JOURNAL OF MICROMECHANICS AND MICROENGINEERING (IOP) 13, pp. 927–941, 2003
- Antonsson, EK. “Structured Design Methods for MEMS”, NSF MEMS Workshop Final Report, California Institute of Technology, 1996
- Baidya B, Gupta SK, Mukherjee T. “MEMS Component Extraction”, Proceedings of the 1999 International Conference on Modeling and Simulation of Microsystems, pp143–146
- Baidya B, Gupta SK, Mukherjee T. “Feature-Recognition for MEMS Extraction,” Proceedings of the 1998 ASME Design Engineering Technical Conference, DETC98/MECH-5838, September 13–16, 1998, Atlanta, Georgia, USA
- Chang Hl, Yuan WZ, “A “Top-down” Integrated Design Method Based on Feature Transmitting For MEMS”, Piezoelectrics and Acoustooptics, 2001,23(S0), pp182–184.( in Chinese)
- DeVoe DL, Green SB, Jump JM. “Automated Solid Model Extraction for MEMS Visualization”, Proceedings of the 1998 International Conference on Modeling and Simulation of Microsystems, pp.292–297
- Dixit H, Kannapan S, Taylor DL. “3D geometric simulation of MEMS fabrication processes: A semantic approach”, Proc. 4th ACM Symposium on Solid Modeling and Applications, pp376–387. 1997
- Gao F, Hong YS, Sarma R. “Feature model for surface micro-machined MEMS”, Proceedings of the 2003 ASME Design Engineering Technical Conference, DETC2003/CIE-48186, September 2–6, 2003, Chicago, Illinois, USA
- Gao F, Sarma R. “A Declerative Feature-Based Geometric Design Tool for Surface Micro-machined MEMS”, Proceedings of the 2001 ASME Design Engineering Technical Conference, DETC2001/CIE-21775, September 9–12, 2001, Pittsburgh, Pennsylvania
- Hubbard TJ, Antonsson EK. “Cellular Automata in MEMS Design”, Sensors and Materials, 9(7), pp 437–448, 1997
- Hubbard TJ, Antonsson EK. “Emergent Faces in Crystal Etching”, Journal of Microelectomechanical Systems, 3(1), pp 19–28, 1994
- LI, H. “Evolutionary Techniques Applied to Mask-layout Synthesis in Micro-Mechanical-Electronic Systems (MEMS)”. PhDs thesis, California Institute of Technology, Pasadena, CA, June 1999.
- Koester D, A Cowen, Mahadevan R, Stonfield M, Hardy B. “PolyMUMPs Design Handbook, revision 10.0”, MEMSCAP, 2003
- Koppelman, GM. “OYSTER, a threedimensional structure simulator for microelectromechanical design”, Sensors and Actuators 1989, 20:179–185.
- Madou, MJ. “Fundamentals of Microfabrication”, CRC Press, 1997.
- Mark K. Long. “Computer Aided Mask Layout Synthesis for Anisotropic Etch Photolithography”, PhDs Thesis, California Institute of Technology, 1999
- Osterberg PM, and Senturia SD. “MemBuilder: An automated 3D solid model construction program for microelectromechanical structures”, Proceedings of the 8th International Conference on Solid-State Sensors and Actuators, and EuroSensors IX, Stockholm, Sweden, Vol. 1, pp. 21–24. 1995
- Perrin A, Ananthakrishnan V, Gao F, Sarma R, Ananthasuresh GK. “Voxel-Based Heterogeneous Geometric Modeling for Surface Micro-machined MEMS”, Proceedings of the 2001 International Conference on Modeling and Simulation of Microsystems, pp 136–140