REFERENCES
- Arakawa, M.; Miyake, S.; Nakao, S.: Approximate multi-objective optimization of medical foot support: Case of 3D shape optimization, American Society of Mechanical Engineers International Design Engineering Technical Conferences, 2009.
- Cheung, J.; Zhang, M.: Parametric design of pressure-relieving foot orthosis using statistics- based finite element method, Medical Engineering Physics, 30, 2008, 269–277. doi: 10.1016/j.medengphy.2007.05.002
- Crabtree, P.; Dhokia, V.; Newman, S.; Ansell, M.: Manufacturing methodology for personalised symptom-specific sports insoles, Robotics Computer Integration Manufacturing, 25, 2009, 972–979. doi: 10.1016/j.rcim.2009.04.016
- Erdemir, A.; Saucerman, J.; Lemmon, D.; Loppnow, B.; Turso, B.; Ulbrecht, J.; Cavanagh, P.: Local plantar pressure relief in therapeutic footwear: design guidelines from finite element models, Journal Biomechanics, 38, 2005. doi: 10.1016/j.jbiomech.2004.09.009
- Foort, J.; Spiers, R.; Bannon, M.: Experimental fittings of sockets for below-knee amputees using computer aided design and manufacturing techniques, Prosthetics Orthotics International, 9, 1985, 46–47.
- Goske, S.; Erdemir, A.; Petre, M.; Budhabhatti, S.; Cavanagh P.: Reduction of plantar heel pressures: Insole design using finite element analysis, Journal Biomechanics, 39, 2006, 2363–2370. doi: 10.1016/j.jbiomech.2005.08.006
- Gu, Y.; Li, S.; Lake, M.; Zeng, Y.; Ren, X.; Li, Z.: Image-based midsole insert design and the material effects on heel plantar pressure distribution during simulated walking loads, Computer Method Biomechanics Biomedical Engineering, 14, 2011, 747–753. doi: 10.1080/10255842.2010.493886
- Houle, P.; Beaulieu, E.; Liu, Z; Novel fully integrated computer system for custom footwear: From 3D digitization to manufacturing, Electronic Imaging, 2010.
- Hsu, Y.; Gung, Y.; Shih, S.; Feng, C.; Wei, S.; Yu, C.; Chen, C.: Using an Optimization Approach to Design an Insole for Lowering Plantar Fascia Stress—A Finite Element Study, Annals Biomedical Engineering, 36, 2008. doi: 10.1007/s10439-008-9516-x
- Hussein, S.: An intelligent design for foot orthoses, Key Eng Mat, 2008, 381–382.
- Jones, D.; Impact of advanced manufacturing technology on prosthetic and orthotic practice, Journal of Biomedical Engineering 10, 1988.
- Kelaher, D.; Mirka, G.; Dudziak, K.: Effects of semi-rigid arch-support orthotics: an investigation with potential ergonomic implications, Applied Ergonomics, 31, 2000. doi: 10.1016/S0003-6870(00)00018-1
- Klasson, B.: Computer aided design, computer aided manufacture and other computer aids in prosthetics and orthotics, Prosthetics Orthotics International, 9, 1985, 3–11.
- Kosolapov, S.: Robust Algorithms Sequence for Structured Light 3D Scanner Adapted for Human Foot 3D Imaging, Journal of Communications and Computer, 8, 2011, 595–598.
- Lee, W.; Lee, C.; Leung, A.; Hutchins, S.: Is it important to position foot in subtalar joint neutral position during non-weight-bearing molding for foot orthoses?, Journal of Rehabilitation Research, 49, 2012, 459–66. doi: 10.1682/JRRD.2011.03.0049
- Lochner, S.; Huissoon, J.; Bedi, S.: Development of a patient-specific anatomical foot model from structured light scan data, Computer Methods Biomechanics Biomedical Engineering, 2012.
- Lochner, S.; Huissoon, J.; Bedi, S.: Parametric design of Custom foot orthotic model. Computer-Aided Design and Applications, 9, 2012, 1–11. doi: 10.3722/cadaps.2012.1-11
- Lochner, S.: Computer Aided Engineering in the Foot Orthosis Development Process, 2013.
- Pallari, J.; Dalgarno, K.; Woodburn, J.: Mass customization of foot orthoses for rheumatoid arthritis using selective laser sintering, IEEE Transactions on Biomedical Engineering, 57, 2010, 1371–1378. doi: 10.1109/TBME.2010.2044178
- Philps, J.: The Functional Foot Orthosis, Edinburgh: Churchill Livingstone, 1995.
- Rodriguez, J.: Computer vision of the foot sole based on laser metrology and algorithms of artificial intelligence, Optical Engineering, 48, 2009.
- Root, M.; Weed, J.; Orien, W.: Neutral Position Casting Techniques, Clinical Biomechanics Corporation, 1971.
- Sobel, E.; Levitz, S.: Reappraisal of the negative impression cast and the subtalar joint neutral position, Journal American Podiatric Medical Association, 87, 1997, 32–33. doi: 10.7547/87507315-87-1-32
- Telfer, S.; Pallari J.; Munguia J.; Dalgarno K.; McGeough M.; Woodburn J.: Embracing additive manufacture: implications for foot and ankle orthosis design, BMC Musculseletal Disorders, 13, 2012.
- Trinidad, L.: Engineering modeling, analysis and optimal design of custom foot orthotic, ProQues. Disser. and Theses, 2011.
- Tsung, B.; Zhang, M.; Mak, A.; Wong, M.: Effectiveness of insoles on plantar pressure redistribution, Journal of rehabilitation research and development, 2004.