247
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Inverse thermal problems in computational modelling of the paper vacuum drying process

, , &
Pages 59-73 | Received 02 Sep 2010, Accepted 06 Oct 2010, Published online: 24 Jan 2011

References

  • Getson, DM, 2002. High Voltage Bushings. Germany: ABB Materials; 2002.
  • Russek, RM, 1967. Drying and impregnation of paper-insulated power cables, IEEE Trans. Power Apparatus Syst. PAS-86(1) (1967), pp. 34–52.
  • Kowalski, SJ, 2003. Thermomechanics of Drying Processes, . Berlin, Heidelberg: Springer-Verlag; 2003.
  • Strumiłło, Cz, 1975. Fundamentals of Drying Theory. Warsaw: WNT; 1975, (in Polish).
  • Coumans, WJ, 2000. Models for drying kinetics based on drying curves of slabs, Chem. Eng. Process. 39 (2000), pp. 53–68.
  • Kroes, B, 1999. "Influence of material properties on drying kinetics". In: Ph.D. Thesis. Eindhoven: Technical University of Eindhoven; 1999.
  • Bear, J, and Bachmat, Y, 1990. Introduction to Modeling of Transport Phenomena in Porous Media. Dordrecht: Kluwer Academic; 1990.
  • Nield, DA, and Bejan, A, 1999. Convection in Porous Media. New York: Springer-Verlag; 1999.
  • Coumans, WJ, and Kruf, WMA, 1995. Mechanistic and lump approach of internal transport phenomena during drying of paper sheet, Drying Technol. 13 (4) (1995), pp. 985–998.
  • Cheng, X, and Fan, J, 2004. Simulation of heat and moisture transfer with phase change and mobile condensates in fibrous insulation, Int. J. Thermal Sci. 43 (2004), pp. 665–676.
  • Singhal, AK, Athavale, MM, Li, H, and Jiang, Y, 2002. Mathematical basis and validation of the full cavitation model, J. Fluids Eng. 124 (2002), pp. 617–624.
  • Karlsson, M, and Stenström, S, 2005. Static and dynamic modeling of cardboard drying, Part 1: Theoretical model, Drying Technol. 23 (2005), pp. 143–163.
  • Nowak, AJ, Buliński, ZP, Kasza, K, and Matysiak, Ł, 2008. "Thermodynamic Analysis of the Paper Vacuum Drying Process and the Experimental Validation of Its Computational Model". In: Proceedings of the XX Jubileuszowy Zjazd Termodynamików. Wrocław, Poland: Tom II; 2008. pp. 115–121.
  • Nowak, AJ, Buliński, Z, Kasza, K, and Matysiak, Ł, Experimntal Analysis of Vacuum Drying of the High Voltage Bushing. Presented at Proceedings of the World Conference on Experimental Heat Transfer, Fluid Flow and Thermodynamics, ExHFT-7. Cracow, Poland, 2009, (invited paper).
  • Nowak, AJ, Buliński, Z, and Kasza, K, , Ł Matysiak, Computational model and experimental validation of the paper vacuum drying process, Int. J. Heat Mass Transfer (submitted for publication).
  • FLUENT 6.3 User's Guide, Fluent.Inc, Lebanon, USA, 2006.
  • FLUENT 6.3 User Defined Function Manual, Fluent.Inc, Lebanon, USA, 2006.
  • Buliński, ZP, Nowak, AJ, Kasza, K, and Matysiak, Ł, 2008. "Initial Inverse Problem in the Vacuum Paper Drying Process". In: Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008). Venice, Italy. 2008.
  • Chemkhi, S, and Zagroubba, F, 2005. Water diffusion coefficient in clay material from drying data, Dessalination 185 (2005), pp. 491–498.
  • Hamdami, N, Monteau, JY, and Le Bail, A, 2004. Transport properties of a high porosity model food at above and sub-freezing temperatures: Part 2. Evaluation of the effective moisture diffusivity from drying data, J. Food Engin. 62 (2004), pp. 385–392.
  • Ergun, S, and Orning, AA, 1952. "Fluid Flow Through Packed Columns". In: Chemical Engineering Progress. Vol. 48. New York: American Institute of Chemical Engineers; 1952. pp. 89–94.
  • Clayton, CT, 2006. Multiphase Flow Handbook. Boca Raton, FL: CRC Press Taylor & Francis; 2006.
  • Lemmon, EW, Jacobsen, RT, Penoncello, SG, and Friend, D, 2000. Thermodynamic properties of air and mixtures of nitrogen, argon, and oxygen from 60 to 2000 K at pressures to 2000 MPa, J. Phys. Chem. Ref. Data 29 (2000), pp. 331–386.
  • Kestin, J, Sengers, JV, Kangmar-Parsi, B, and Levelt Sengers, JMH, 1984. Thermophysical Properties of Fluid H2O, J. Phys. Chem. Ref. Data 13 (1984), pp. 175–183.
  • Nilson, J, and Stenetröm, S, 2001. Modelling of heat transfer in hot pressing and impulse drying of paper, Drying Technol. 19 (10) (2001), pp. 2469–2485.
  • Kurpisz, K, and Nowak, AJ, 1995. "Inverse Thermal Problems". In: International Series on Computational Engineering. Southampton: Computational Mechanics Publications; 1995.
  • Özisik, MN, and Orlande, HRB, 2000. Inverse Heat Transfer: Fundamentals and Application, . New York: Taylor & Francis; 2000.
  • Press, WH, Flannery, BF, Teukolsky, SA, and Wetterling, WT, 1989. Numerical Recipes, . New York: Cambridge University Press; 1989.
  • Kansa, EJ, and Hon, YC, 2000. Circumventing the ill-conditioning problem with multiquadrics radial basis functions: Applications to elliptic partial differential equations, Comput. Math. Appl. 39 (7–8) (2000), pp. 123–137.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.