Reconstruction of real tooth surfaces of spiral bevel pinions with modified offset

References

• Litvin FL, Zhang Y. Local synthesis and tooth contact analysis of face-milled spiral bevel gears. NASA CR-4342, AVSCOM TR-90-C-028, NASA Office of Management Scientific and Technical Information Division; 1991.
   Google Scholar
• Stadtfeld HJ, Gaiser U. The ultimate motion graph. ASME J. Mech. Des. 2000;122:317–322.10.1115/1.1286124
   Web of Science ®Google Scholar
• Argyris J, Fuentes A, Litvin FL. Computerized integrated approach for design and stress analysis of spiral bevel gears. Comput. Methods Appl. Mech. Eng. 2002;191:1057–1095.10.1016/S0045-7825(01)00316-4
   Web of Science ®Google Scholar
• Litvin FL, Alfonso F, Mullins BR, Woods R. Computerized design, generation, simulation of meshing and contact, and stress analysis of formate cut spiral bevel gear drives. NASA/CR-2001-210894, ARL-CR-467, National Technical Information Service; 2003.
   Google Scholar
• Alfonso F, Gonzalez-Perez I, Litvin FL, Hayasaka K, Yukishima K. Design, manufacture, and evaluation of low-noise high-endurance spiral bevel gear drives. Paper presented at: Power Transmission and Gearing Conference; 2005 Sep 24–28; Long Beach, CA.
   Google Scholar
• Litvin FL, Alfonso F, Hayasaka K. Design, manufacture, stress analysis, and experimental tests of low noise and high endurance of spiral bevel gears. Comput. Methods Appl. Mech. Eng. 2006;41:83–118.
   Google Scholar
• Wang PY, Fong ZH. Fourth-order kinematic synthesis for face-milling spiral bevel gears with modified radial motion (MRM) correction. ASME J. Mech. Des. 2006;128:457–467.10.1115/1.2168466
   Web of Science ®Google Scholar
• Fan Q. Enhanced algorithms of contact simulation for hypoid gear drives produced by face-milling and face-hobbing processes. ASME J. Mech. Des. 2007;129:31–37.10.1115/1.2359475
   Web of Science ®Google Scholar
• Sheveleva GI, Volkov AE, Medvedev VI. Algorithms for analysis of meshing and contact of spiral bevel gears. J. Mech. Mach. Theory. 2007;42:198–215.10.1016/j.mechmachtheory.2006.02.009
   Web of Science ®Google Scholar
• Simon V. Computer simulation of tooth contact analysis of mismatched spiral bevel gears. J. Mech. Mach. Theory. 2007;42:365–381.10.1016/j.mechmachtheory.2006.02.010
   Web of Science ®Google Scholar
• Simon V. Influence of tooth errors and misalignments on tooth contact in spiral bevel gears. J. Mech. Mach. Theory. 2008;43:1253–1267.10.1016/j.mechmachtheory.2007.10.012
   Web of Science ®Google Scholar
• Tsai YC, Hsu WY. The study on the design of spiral bevel gear sets with circular-arc contact paths and tooth profiles. J. Mech. Mach. Theory. 2008;43:1158–1174.10.1016/j.mechmachtheory.2007.08.004
   Web of Science ®Google Scholar
• Teixeira Alves J, Guingand M, de Vaujany J-P. Set of functions for the calculation of bending displacements for spiral bevel gear teeth. J. Mech. Mach. Theory. 2010;45:349–363.10.1016/j.mechmachtheory.2009.09.006
   Web of Science ®Google Scholar
• Mermoz E, Astoul J, Sartor M, Linares JM, Bernard A. A new methodology to optimize spiral bevel gear topography. CIRP Ann. Manuf. Technol. 2013;62:119–122.
   Web of Science ®Google Scholar
• Litvin FL, Zhang Y, Kieffer J, Handschuh RF. Identification and minimization of deviations of real gear tooth surfaces. ASME J. Mech. Des. 1991;113:55–62.10.1115/1.2912751
   Web of Science ®Google Scholar
• Litvin FL, Kuan C, Wang JC, Handschuh RF, Masseth J, Maruyama N. Minimization of deviations of gear real tooth surfaces determined by coordinate measurements. ASME J. Mech. Des. 1993;115:995–1001.10.1115/1.2919298
   Web of Science ®Google Scholar
• Stadfeld HJ. Handbook of bevel and hypoid gears. New York (NY): Rochester of Institute of Technology; 1993.
   Google Scholar
• Wang J. A study on the tooth surface geometrical precision control of spiral bevel and hypoid gears based on 3-D coordinate measuring [dissertation]. Xi’an: Xi’an Jiaotong University; 2003 ( in Chinese).
   Google Scholar
• Wang XC, Wang J, Jiang H, Li RF, Feng WJ. Tooth surface measurement and machine-settings correction of spiral bevel gear. Chin. J. Mech. Eng. 2003;39:125–128 ( in Chinese).
   Google Scholar
• Wang ZY, Zeng T. Correction of tooth flank errors of spiral bevel gear based on proportional change parameters. Chin. J. Mech. Eng. 2010;46:43–47 ( in Chinese).10.3901/JME.2010.01.043
   Google Scholar
• Artoni A, Gabiccini M, Kolivand M. Ease-off based compensation of tooth surface deviations for spiral bevel and hypoid gears: only the pinion needs corrections. J. Mech. Mach. Theory. 2013;61:84–101.10.1016/j.mechmachtheory.2012.10.005
   Web of Science ®Google Scholar
• Simon V. Optimal machine tool setting for hypoid gears improving load distribution. ASME J. Mech. Des. 2000;123:577–582.10.1115/1.1414129
   Web of Science ®Google Scholar
• Fuentes A, Gonzalez-Perez I, Litvin FL, Hayasaka K, Yukishima K. Determination of basic machine-tool settings for generation of spiral bevel gears from blank data. Paper presented at: 10th Power Transmission and Gearing Conference; 2007 Sep 4–7; Las Vegas, NV.
   Google Scholar
• Cao XM, Fang ZD, Xu H, Su JZ. Design of pinion machine-tool settings for spiral bevel gears by controlling contact path and transmission errors. Chin. J. Aeronaut. 2008;21:179–186.
   Web of Science ®Google Scholar
• Liu GL, Shen YW, Wang SM. Determination of contact path of spiral bevel gears by rigid support. Mech. Sci. Technol. 2001;20:392–394 ( in Chinese).
   Google Scholar
• Su ZJ, Wu XT, Mao SM, Li JG. Design of hypoid gear tooth surface represented by non-uniform rational B-spline polynomial. J. Xi’an Jiaotong Univ. 2005;39:17–20 ( in Chinese).
   Google Scholar
• Wang XL, Wang YZ, Rao F, Zhong YF. Study on parametric tooth surface of hypoid bevel gears. Mech. Transm. 2005;29:23–26 ( in Chinese).
   Google Scholar
• Wang PY, Fong ZH. Adjustability improvement of face-milling spiral bevel gears by modified radial motion (MRM) method. J. Mech. Mach. Theory. 2008;43:1253–1267.
   Web of Science ®Google Scholar
• Litvin FL. Gear geometry and applied theory. Englewood Cliffs (NJ): PTR Prentice Hall; 1994. Chapter 6–8; p. 107–281.
   Google Scholar
• Liu GL, Tian YJ, Jiang P. Realization of expected direction angle of SGM spiral bevel gears based on local synthesis. Paper presented at: 2010 International Conference on Engineering Design and Optimization (ICEDO 2010); 2010 Oct 28–30; Ningbo, China.
   Google Scholar