193
Views
2
CrossRef citations to date
0
Altmetric
Articles

Material characterization and interfacial boundary identification by solving an inverse elasto statics boundary elements problem

&
Pages 1048-1064 | Received 04 Apr 2015, Accepted 26 Sep 2015, Published online: 28 Oct 2015

References

  • Kennon SR, Dulikravich, GS. The inverse design of internally cooled turbine blades. ASME paper 84-GT-7. Presented at 29th International Gas Turbine Conference; 1984 June 4–7; Amsterdam.
  • Murai T, Kagawa Y. Boundary element iterative techniques for determining the interface boundary between two Laplace domains: a basic study 3 of impedance plethysmography as an inverse problem. Int. J. Numer. Methods Eng. 1986; 35–47.10.1002/(ISSN)1097-0207
  • Ohnaka K, Uosaki K. Simultaneous identification of the external input and parameters of diffusion type distributed parameter systems. Int. J. Control. 1987;46:889–895.10.1080/00207178708547401
  • Dulicravich GS. Inverse design and active control concepts in strong unsteady heat conduction. Appl. Mech. Rev. 1988;41:270–277.10.1115/1.3151899
  • Khodadad M, Altiero NJ. Characterization of the interior of an inhomogeneous body using surface temperature and/or heat flux measurements. Third Annual Inverse Problems in Engineering Seminar; 1989; East Lansing (MI).
  • Gao Z, Mura T. On the inversion of residual stresses from surface displacements. J. Appl. Mech. 1989;56:508–513.10.1115/1.3176119
  • Das S, Mitra AK. An algorithm for the solution of inverse Laplace problems and its application in flaw identification in materials. J. Comput. Phys. 1992;99:99–105.
  • Khodadad-Saryazdi M. Characterization of the interior of an inhomogeneous body using surface measurements [Ph.D. thesis]. East Lancing (MI): Michigan State University; 1990.
  • Kassab AJ, Moslehy FA, Daryapurkar AB. Nondestructive detection of cavities by an inverse elasto statics boundary elements method. Eng. Anal. Boundary Elem. 1994;13:4–555.
  • Lee HS, Kim YH, Park CHJ, et al. A new spatial regularization scheme for the identification of the geometric shape of an inclusion in a finite body. Int. J. Numer. Methods Eng. 1999;46:973–992.10.1002/(ISSN)1097-0207
  • Lee HS, Park CHJ, Park HW. Identification of geometric shapes and material properties of inclusions in two-dimensional finite bodies by boundary parameterization. Comput. Methods Appl. Mech. Eng. 2000;181:1–20.10.1016/S0045-7825(99)00165-6
  • Khodadad M, Dashti-Ardakani M. Inclusion identification by inverse application of boundary element method, genetic algorithm and conjugate gradient method. Am. J. Appl. Sci. 2008;5:1158–1166.
  • Khodadad M, Dashti-Ardakani M. Determination of the location, size and mechanical properties of an elastic inclusion using surface measurements. Inverse Prob. Sci. Eng. 2009;17:591–604.10.1080/17415970802309267
  • Ardakani MD, Khodadad M. Shape estimation of a cavity by inverse application of the boundary elements 2D elasto statics problem. Int. J. Comput. Methods. 2013;10: 1350042.
  • Ammari H, Beretta E, Francini E, et al. Reconstruction of small interface changes of an inclusion from modal measurements II: the elastic case. J. Math. Pures Appl. 2010;94:322–339.10.1016/j.matpur.2010.02.001
  • Ammari H, Garnier J, Kang H, et al. Multistatic imaging of extended targets. SIAM J. Imaging Sci. 2012;5:564–600.10.1137/10080631X
  • Alifanov OM. Solution of an inverse problem of heat conduction by iteration methods. J. Eng. Phys. 1972;26:682–689.
  • Huang CH, Ozisik MN. Inverse problem of determining unknown wall heat flux in laminar flow through a parallel plate duct. Numer. Heat Transfer, Part A. 1999;21:55–70.
  • Huang CH, Yan JY. An inverse problem in simultaneously measuring temperature-dependent thermal conductivity and heat capacity. Int. J. Heat Mass Transfer. 1995;38:3433–3441.10.1016/0017-9310(95)00059-I
  • Tervola P. A method to determine the thermal conductivity from measured temperature profiles. Int. J. Heat Mass Transfer. 1989;32:1425–1430.10.1016/0017-9310(89)90066-5
  • Huang CH, Ozisik MN. A direct integration approach for simultaneously estimating temperature-dependent thermal conductivity and heat capacity. Numer. Heat Transfer, Part A: Appl. 1991;20:95–110.10.1080/10407789108944811
  • Huang CH, Yeh CY, Orland HRB. A nonlinear inverse problem in simultaneously estimating the heat and mass production rates for a chemically reacting fluid. Chem. Eng. Sci. 2003;58:3741–3752.10.1016/S0009-2509(03)00270-7
  • Huang CH, Chao BH. An inverse geometry problem in identifying irregular boundary configurations. Int. J. Heat Mass Transfer. 1997;40:2045–2053.10.1016/S0017-9310(96)00280-3
  • Huang CH, Shih CC. Identify the interfacial configurations in a multiple region domain problem. J. Thermophys. Heat Transfer. 2005;19:533–541.10.2514/1.11260
  • Khodadad M, Ardakani MD. Application of the inverse elasticity problem to identify irregular interfacial configurations. Eng. Anal. Boundary Elem. 2009;33:872–879.
  • Ardakani MD, Khodadad M. Identification of thermal conductivity and the shape of an inclusion using the boundary elements method and the particle swarm optimization algorithm. Inverse Prob. Sci. Eng. 2009;17:855–870.
  • Brebbia CA, Dominguez J. Boundary elements: an introductory course. Southampton: Computational Mechanics Publications; 1989.
  • Atashpaz-Gargari E, Lucas C. Imperialist competitive algorithm: an algorithm for optimization inspired by imperialistic competition. IEEE Congress on Evolutionary Computation; Singapore; 2007.
  • Luenberger, DG. Linear and nonlinear programming. 2nd ed. Stanford, CA: Addison Wesley; 1989.
  • Datta BN. Numerical linear algebra and application. Philadelphia: International Thomson; 1994.
  • Constantinos E, Efstathiou R. Simplex method. Department of Chemistry National and Kapodistrian University of Athens; 2000. Available from http://www.chem.uoa.gr/applets/AppletSimplex/Appl_Simplex2.html

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.