1,062
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Application of active magnetic bearings for in situ flexible rotor residual balancing using a novel generalized influence coefficient method

&
Pages 943-968 | Received 20 Jun 2017, Accepted 17 Jul 2018, Published online: 03 Aug 2018

References

  • Tiwari R. Rotor systems: analysis and identification. Boca Rotan, FL: CRC Press, Taylor and Francis Group; 2017.
  • Rao J. Rotor dynamics. New Delhi: New Age International; 1996.
  • Childs DW. Turbomachinery rotordynamics: phenomena, modeling, and analysis. New York: Wiley; 1993.
  • Bleuler H, Cole M, Keogh P, et al. Magnetic bearings: theory, design, and application to rotating machinery. Springer Science & Business Media; 2009.
  • Chiba A, Fukao T, Ichikawa O, et al. Magnetic bearings and bearingless drives. Burlington: Elsevier; 2005.
  • Mushi SE, Lin Z, Allaire PE. Design, construction, and modeling of a flexible rotor active magnetic bearing test rig. IEEE/ASME Trans Mechatron. 2012;17:1170–1182. doi: 10.1109/TMECH.2011.2160456
  • Kang Y, Liu C-P, Sheen G-J. A modified influence coefficient method for balancing unsymmetrical rotor-bearing systems. J Sound Vib. 1996;194:199–218. doi: 10.1006/jsvi.1996.0353
  • Ehyaei J, Moghaddam MM. Dynamic response and stability analysis of an unbalanced flexible rotating shaft equipped with n automatic ball-balancers. J Sound Vib. 2009;321:554–571. doi: 10.1016/j.jsv.2008.10.019
  • Moon J-D, Kim B-S, Lee S-H. Development of the active balancing device for high-speed spindle system using influence coefficients. Int J Mach Tools Manuf. 2006;46:978–987. doi: 10.1016/j.ijmachtools.2005.07.048
  • Sudhakar G, Sekhar A. Identification of unbalance in a rotor bearing system. J Sound Vib. 2011;330:2299–2313. doi: 10.1016/j.jsv.2010.11.028
  • Pennacchi P, Chatterton S, Ricci R. Rotor balancing using high breakdown-point and bounded-influence estimators. Mech Syst Signal Process. 2010;24:860–872. doi: 10.1016/j.ymssp.2009.10.004
  • Autila M, Lantto E, Arkkio A. Determination of forces and linearized parameters of radial active magnetic bearings by finite element technique. IEEE Trans Magn. 1998;34:684–694. doi: 10.1109/20.668066
  • Tiwari R, Chakravarthy V. Simultaneous identification of residual unbalances and bearing dynamic parameters from impulse responses of rotor–bearing systems. Mech Syst Signal Process. 2006;20:1590–1614. doi: 10.1016/j.ymssp.2006.01.005
  • Imlach J, Blair B, Allaire P. Measured and predicted force and stiffness characteristics of industrial magnetic bearings. J Tribol. 1991;113:784–788. doi: 10.1115/1.2920693
  • Jin C, Xu Y, Zhou J, et al. Active magnetic bearings stiffness and damping identification from frequency characteristics of control system. Shock Vib. 2016;2016: Article ID 1067506, 8 pages.
  • Tiwari R, Chougale A. Identification of bearing dynamic parameters and unbalance states in a flexible rotor system fully levitated on active magnetic bearings. Mechatronics (Oxf). 2014;24:274–286. doi: 10.1016/j.mechatronics.2014.02.010
  • Mizuno T, Araki K, Bleuler H. Stability analysis of self-sensing magnetic bearing controllers. IEEE Transactions on Control Systems Technology. 1996;4:572–579. doi: 10.1109/87.531923
  • Kim H-Y, Lee C-W. Design and control of active magnetic bearing system with Lorentz force-type axial actuator. Mechatronics (Oxf). 2006;16:13–20. doi: 10.1016/j.mechatronics.2005.09.005
  • Chen K-Y, Tung P-C, Tsai M-T, et al. A self-tuning fuzzy PID-type controller design for unbalance compensation in an active magnetic bearing. Expert Syst Appl. 2009;36:8560–8570. doi: 10.1016/j.eswa.2008.10.055
  • Sabirin CR, Binder A, Popa DD, et al. Modeling and digital control of an active magnetic bearing system. Romania Review of Technical Sciences Electrotechnical and Energy Series. 2007;52:157.
  • Darbandi SM, Behzad M, Salarieh H, et al. Linear output feedback control of a three-pole magnetic bearing. IEEE/ASME Trans Mechatron. 2014;19:1323–1330. doi: 10.1109/TMECH.2013.2280594
  • Bishop R, Gladwell G. The vibration and balancing of an unbalanced flexible rotor. J Mech Eng Sci. 1959;1:66–77. doi: 10.1243/JMES_JOUR_1959_001_010_02
  • Drechsler J. Processing surplus information in computer aided balancing of large flexible rotors. In Proceedings of the Institution of Mechanical Engineers Conference on Vibrations in Rotating Machinery, Cambridge, UK; 1980. p. 65–70.
  • Tiwari R. Conditioning of regression matrices for simultaneous estimation of the residual unbalance and bearing dynamic parameters. Mech Syst Signal Process. 2005;19:1082–1095. doi: 10.1016/j.ymssp.2004.09.005

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.