Determination of sulfur content in petroleum products – an overview

References

• Karchmer JH. Sulfur compounds from petroleum fractions. Adv Chem. 1954;10:398–425. doi: 10.1021/ba-1954-0010.ch042
   Google Scholar
• Stumpf A, Tolvaj K, Juhasz M. Detailed analysis of sulfur compounds in gasoline range petroleum products with high-resolution gas chromatography–atomic emission detection using group-selective chemical treatment. J Chromat A. 1998;819:67–74. doi: 10.1016/S0021-9673(98)00444-0
   Web of Science ®Google Scholar
• Lababidi S, Panda SK, Andersson JT, et al. Direct coupling of normal-phase high-performance liquid chromatography to atmospheric pressure laser ionization Fourier transform ion cyclotron resonance mass spectrometry for the characterization of crude oil. Anal Chem. 2013;85:9478–9485. doi: 10.1021/ac400670s
   PubMed Web of Science ®Google Scholar
• Zeng X, Lin J, Liu J, et al. Speciation distribution of polycyclic aromatic sulfur heterocycles in crude oil. J Anal Chem. 2006;34:1546–1551.
   Web of Science ®Google Scholar
• Mahe L, Thomas D, Marion C, et al. Global approach for the selection of high temperature comprehensive two-dimensional gas chromatography experimental conditions and quantitative analysis in regards to sulfur-containing compounds in heavy petroleum cuts. J Chromat A. 2011;1218:534–544. doi: 10.1016/j.chroma.2010.11.065
   PubMed Web of Science ®Google Scholar
• Bolin TB, Birdwell JE, Lewan MD, et al. Sulfur species in source rock bitumen before and after hydrous pyrolysis determined by X-ray absorption near-edge structure. Energ Fuel. 2016;30:6264–6270. doi: 10.1021/acs.energyfuels.6b00744
   Web of Science ®Google Scholar
• Argyle MD, Bartholomew CH. Heterogeneous catalyst deactivation and regeneration: a review. Catal. 2015;5:145–269. doi: 10.3390/catal5010145
   Web of Science ®Google Scholar
• John RC, Pelton AD, Young AL, et al. Assessing corrosion in oil refining and petrochemical processing. Mater Res. 2004;7(1):163–171. doi: 10.1590/S1516-14392004000100022
   Google Scholar
• Rebak RB. Sulfidic corrosion in refineries–a review. Corrosion Rev. 2011;29:123–133. doi: 10.1515/CORRREV.2011.021
   Web of Science ®Google Scholar
• EPA sets tier 3 motor vehicle emission and fuel standards, EPA-420-F-14-009. 2014.
   Google Scholar
• Tier 3 gasoline sulfur standard’s impact on gasoline refining. EPA-420-F-14-007. 2014.
   Google Scholar
• EPA sets tier 3 motor vehicle emission and fuel standards, strengthens clean cars program. EPA-420-F-14-010. 2014.
   Google Scholar
• Standard test method for trace quantities of sulfur in light liquid petroleum hydrocarbons by oxidative microcoulometry. American Society for Testing and Material. D 3120. 2014.
   Google Scholar
• Standard test method for sulfur in petroleum gas by oxidative microcoulometry. American Society for Testing and Material. D 3246. 2015.
   Google Scholar
• Standard test method for determination of total sulfur in light hydrocarbons, spark ignition engine fuel, diesel engine fuel, and engine oil by ultraviolet fluorescence. American Society for Testing and Material. D 5453. 2012.
   Google Scholar
• Standard test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence. American Society for Testing and Material. D 6667. 2014.
   Google Scholar
• Standard test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases and natural gas by ultraviolet fluorescence. American Society for Testing and Material. D 7551. 2015.
   Google Scholar
• Standard test method for sulfur in petroleum products by high temperature combustion and IR detection, American Society for Testing and Material. D 1552. 2015.
   Google Scholar
• Standard test method for sulfur in the analysis sample of coal and coke using high-temperature tube furnace combustion. American Society for Testing and Material. D 4239 (14). 2016.
   Google Scholar
• Standard test method for total sulfur in coal and coke combustion residues using a high-temperature tube furnace combustion method with infrared absorption. American Society for Testing and Material. D 5016 (08). 2016.
   Google Scholar
• Standard test method for sulfur in petroleum products by wavelength dispersive X-ray fluorescence spectrometry. American Society for Testing and Material. D 2622. 2010.
   Google Scholar
• Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry. American Society for Testing and Material. D 4294. 2010.
   Google Scholar
• Standard test method for sulfur in gasoline by wavelength dispersive X-ray fluorescence, American Society for Testing and Material. D 6334. 2012.
   Google Scholar
• Standard test method for determination of phosphorus, sulfur, calcium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy. American Society for Testing and Material. D 6481. 2014.
   Google Scholar
• Standard test method for sulfur in gasoline, diesel fuel, jet fuel, kerosine, biodiesel, biodiesel blends, and gasoline-ethanol blends by monochromatic wavelength dispersive X-ray fluorescence spectrometry. American Society for Testing and Material. D 7039. 2015.
   Google Scholar
• Standard test method for low sulfur in automotive fuels by energy-dispersive X-ray fluorescence spectrometry using a low-background proportional counter. American Society for Testing and Material. D 7212. 2013.
   Google Scholar
• Standard test method for total sulfur in fuel gases by combustion and barium chloride titration. American Society for Testing and Material. D 1072. 2012.
   Google Scholar
• Standard test method for sulfur in petroleum products (lamp method). American Society for Testing and Material. D 1266. 2013.
   Google Scholar
• Standard test method for sulfur in liquefied petroleum gases (oxy-hydrogen burner or lamp). American Society for Testing and Material. D 2784. 2011.
   Google Scholar
• Standard test method for total sulfur in naphthas, distillates, reformulated gasolines, diesels, biodiesels, and motor fuels by oxidative combustion and electrochemical detection. American Society for Testing and Material. D 6920. 2013.
   Google Scholar
• Standard test method for sulfur in petroleum products (general high pressure decomposition device method). American Society for Testing and Material. D 129. 2013.
   Google Scholar
• Standard test method for total sulfur in gaseous fuels by hydrogenolysis and rateometric colorimetry. American Society for Testing and Material. D 4468. 2015.
   Google Scholar
• Standard test method for sulfur in petroleum products by hydrogenolysis and rateometric colorimetry. American Society for Testing and Material. D 4045. 2015.
   Google Scholar
• Standard test method for (thiol mercaptan) sulfur in gasoline, kerosine, aviation turbine, and distillate fuels (potentiometric method). American Society for Testing and Material. D 3227. 2013.
   Google Scholar
• Standard test method for determination of sulfur compounds in natural gas and gaseous fuels by gas chromatography and chemiluminescence. American Society for Testing and Material. D 5504. 2012.
   Google Scholar
• Standard test method for sulfur compounds in light petroleum liquids by gas chromatography and sulfur selective detection. American Society for Testing and Material. D 5623. 2014.
   Google Scholar
• Standard test method for determination of sulfur compounds in natural gas and gaseous fuels by gas chromatography and flame photometric detection. American Society for Testing and Material. D 6228. 2010.
   Google Scholar
• Standard test method for simultaneous measurement of sulfur compounds and minor hydrocarbons in natural gas and gaseous fuels by gas chromatography and atomic emission detection. American Society for Testing and Material. D 6968. 2015.
   Google Scholar
• Standard test method for determination of total sulfur in light hydrocarbons, motor fuels, and oils by online gas chromatography with flame photometric detection. American Society for Testing and Material. D 7041. 2010.
   Google Scholar
• Standard practice for sampling liquefied petroleum (LP) gases, manual method. American Society for Testing and Material. D 1265. 2011.
   Google Scholar
• Standard practice for manual sampling of petroleum and petroleum products. American Society for Testing and Material. D 4057. 2012.
   Google Scholar
• Standard practice for automatic sampling of petroleum and petroleum products. American Society for Testing and Material. D 4177. 2015.
   Google Scholar
• Standard practice for mixing and handling of liquid samples of petroleum and petroleum products. American Society for Testing and Material. D 5854. 2015.
   Google Scholar
• Standard test method for qualitative analysis for active sulfur species in fuels and solvents (doctor test). American Society for Testing and Material. D 4952. 2012.
   Google Scholar
• Standard Test Method for hydrogen sulfide in liquefied petroleum (LP) gases (lead acetate method). American Society for Testing and Material. D 2420. 2013.
   Google Scholar
• Standard test method for analysis of hydrogen sulfide in gaseous fuels (Lead acetate reaction rate method). American Society for Testing and Material, D 4084. 2012.
   Google Scholar
• Standard test method for measurement of total hydrogen sulfide in residual fuels by multiple headspace extraction and sulfur specific detection. American Society for Testing and Material. D 6021. 2012.
   Google Scholar
• Standard test method for mercaptans in natural gas using length-of-stain detector tubes. American Society for Testing and Material. D 1988. 2015.
   Google Scholar