Poly(ethylene disulfide)/carbon fiber composites: cure and effect of fiber content on mechanical and thermal properties

References

• Pirayesh A, Salami-Kalajahi M, Roghani-Mamaqani H, et al. Polysulfide polymers: synthesis, blending, nanocomposites and applications. Polym Rev. 2019;59:124–148.
   Web of Science ®Google Scholar
• Sheydaei M, Edraki M, Javanbakht S, et al. Poly(butylene disulfide) and poly(butylene tetrasulfide): synthesis, cure and investigation of polymerization yield and effect of sulfur content on mechanical and thermophysical properties. Phosphorus Sulfur Silicon Relat Elem. 2021: 1–7. DOI:https://doi.org/10.1080/10426507.2021.1872076.
   Google Scholar
• Allahbakhsh A, Yari S, Safari M, et al. Poly (ethylene disulfide)/graphene oxide nanocomposites: dynamic-mechanical and electrochemical properties. Eur Polym J. 2020;130:109694.
   Web of Science ®Google Scholar
• Moqadam S, Salami-Kalajahi M, Mahdavian M. Synthesis and characterization of sunflower oil-based polysulfide polymer/cloisite 30B nanocomposites. Iran J Chem Chem Eng. 2018;37:185–192.
   Google Scholar
• Sheydaei M, Allahbakhsh A, Haghighi AH, et al. Synthesis and characterization of poly(methylene disulfide) and poly(ethylene disulfide) polymers in the presence of a phase transfer catalyst. J Sulfur Chem. 2014;35:67–73.
   Web of Science ®Google Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Characterization of synthesized poly(aryl disulfide) through interfacial polymerization using phase-transfer catalyst. J Sulfur Chem. 2012;33:303–311.
   Web of Science ®Google Scholar
• Hong S. Influence of curing conditions on the strength properties of polysulfide polymer concrete. Appl Sci. 2017;7:833.
   Google Scholar
• Ren X, Sun Q, Zhu Y, et al. Unveiling the role of hydroxyl architecture on polysulfide trapping for high-performance lithium-sulfur batteries. ACS Appl Energy Mater. 2020;3:4023–4032.
   Web of Science ®Google Scholar
• Allahbakhsh A, Sheydaei M, Mazinani S, et al. Enhanced thermal properties of poly(ethylene tetrasulfide) via expanded graphite incorporation by in situ polymerization method. High Perform Polym. 2013;25:576–583.
   Web of Science ®Google Scholar
• Allahbakhsh A, Haghighi AH, Sheydaei M. Poly(ethylene trisulfide)/graphene oxide nanocomposites. J Therm Anal Calorim. 2017;128:427–442.
   Web of Science ®Google Scholar
• Haghighi AH, Sheydaei M, Allahbakhsh A, et al. Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites. J Therm Anal Calorim. 2014;117:525–535.
   Web of Science ®Google Scholar
• Sheydaei M, Edraki M, Alinia-Ahandani E, et al. Poly(p-xylene disulfide) and poly(p-xylene tetrasulfide): synthesis, cure and investigation of mechanical and thermophysical properties. J Macromol Sci Part A Pure Appl Chem. 2021;58:52–58.
   Web of Science ®Google Scholar
• Sheydaei M, Jabari H, Ali-Asgari Dehaghi H. Synthesis and characterization of ethylenexylene-based polysulfide block-copolymers using the interfacial polymerization method. J Sulfur Chem. 2016;37:646–655.
   Web of Science ®Google Scholar
• Fan X, Sun W, Meng F, et al. Advanced chemical strategies for lithium–sulfur batteries: a review. Green Energy Environ. 2018;3:2–19.
   Google Scholar
• Sheydaei M, Alinia-Ahandani E. Cancer and the role of polymeric-carriers in diagnosis and treatment. J Fasa Univ Med Sci. 2020;10:2408–2421.
   Google Scholar
• Sheydaei M, Alinia-Ahandani E. Cancer and polymeric-carriers. Biomed J Sci & Tech Res. 2020;31:24107–24110.
   Google Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Synthesis and characterization of poly(p-xylylene tetrasulfide) via interfacial polycondensation in the presence of phase transfer catalysts. Des Monomers Polym. 2013;16:191–196.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis of ethylene dichloride-based polysulfide polymers: investigation of polymerization yield and effect of sulfur content on solubility and flexibility. J Sulfur Chem. 2021;42:67–82.
   Web of Science ®Google Scholar
• Usmani AM. Chemistry and technology of polysulfide sealants. Polym Plast Technol Eng. 1982;19:165–199.
   Web of Science ®Google Scholar
• Haro EE, Odeshi AG, Szpunar JA. The effects of micro- and nano-fillers’ additions on the Dynamic impact response of hybrid composite armors made of HDPE reinforced with Kevlar short fibers. Polym-Plast Technol. 2018;57:609–624.
   Web of Science ®Google Scholar
• Tekinalp HL, Kunc V, Velez-Garcia GM, et al. Highly oriented carbon fiber–polymer composites via additive manufacturing. Compos Sci Technol. 2014;105:144–150.
   Web of Science ®Google Scholar
• Patterson BA, Busch CE, Bratcher M, et al. Influence of temperature dependent matrix properties on the high-rate impact performance of thin glass fiber reinforced composites. Compos Part B Eng. 2020;192:108009.
   Web of Science ®Google Scholar
• Gupta MK, Srivastava RK. Mechanical properties of hybrid fibers-reinforced polymer composite: a review. Polym-Plast Technol. 2016;55:626–642.
   Web of Science ®Google Scholar
• Naik S, Dandagwhal RD, Loharkar PK. A review on various aspects of Kevlar composites used in ballistic applications. Mater Today: Proc. 2020;21:1366–1374.
   Google Scholar
• Hassan MF, Sabri MA, Fazal H, et al. Recent trends in activated carbon fibers production from various precursors and applications – a comparative review. J Anal Appl Pyrolysis. 2020;145:104715.
   Web of Science ®Google Scholar
• Yoshitake I, Hasegawa H, Shimose K. Monotonic and cyclic loading tests of reinforced concrete beam strengthened with bond-improved carbon fiber reinforced polymer (CFRP) rods of ultra-high modulus. Eng Struct. 2020;206:110175.
   Web of Science ®Google Scholar
• Wu Y, Dhamodharan D, Wang Z, et al. Effect of electrophoretic deposition followed by solution pre-impregnated surface modified carbon fiber-carbon nanotubes on the mechanical properties of carbon fiber reinforced polycarbonate composites. Compos Part B Eng. 2020;195:108093.
   Web of Science ®Google Scholar
• Grootel AV, Chang J, Wardle BL, et al. Manufacturing variability drives significant environmental and economic impact: the case of carbon fiber reinforced polymer composites in the aerospace industry. J Clean Prod. 2020;261:121087.
   Web of Science ®Google Scholar
• Forintos N, Czigany T. Reinforcing carbon fibers as sensors: the effect of temperature and humidity. Compos Part A Appl Sci Manuf. 2020;131:105819.
   Web of Science ®Google Scholar
• Abdelal NR, Al-Saleh MH, Irshidat MR. Utilizing vacuum bagging process to prepare carbon fiber/CNT-modified-epoxy composites with improved mechanical properties. Polym-Plast Technol. 2018;57:175–184.
   Web of Science ®Google Scholar
• Manh CV, Choi HJ. Enhancement of interlaminar fracture toughness of carbon fiber/epoxy composites using silk fibroin electrospun nanofibers. Polym-Plast Technol. 2016;55:1048–1056.
   Web of Science ®Google Scholar
• Sheydaei M, Alinia-Ahandani E. Synthesis and characterization of methylene-xylene-based polysulfide block-copolymer/carbon nanotube nanocomposites via in situ polymerization method. J Sulfur Chem. 2020;41:421–434.
   Web of Science ®Google Scholar
• Nasrabadi HS, Kalaee MR, Abdouss M, et al. New role of layered silicates as phase transfer catalyst for in situ polymerization of poly(ethylenetetrasulfide) nanocomposite. J Inorg Organomet Polym Mater. 2013;23:950–957.
   Web of Science ®Google Scholar
• Baskaran D, Dunlap JR, Mays JW, et al. Grafting efficiency of hydroxy-terminated poly(methyl methacrylate) with multiwalled carbon nanotubes. Macromol Rapid Commun. 2005;26:481–486.
   Web of Science ®Google Scholar
• Park SJ, Cho MS, Lim ST, et al. Synthesis and dispersion characteristics of multi-walled carbon nanotube composites with poly(methyl methacrylate) prepared by in-situ bulk polymerization. Macromol Rapid Commun. 2003;24:1070–1073.
   Web of Science ®Google Scholar
• Yang Z, Pu H, Yin J. Covalent functionalization of multiwalled carbon nanotubes by polyvinylimidazole. Mater Lett. 2005;59:2838–2841.
   Web of Science ®Google Scholar
• Qiu F, Hao Y, Li X, et al. Functionalized graphene sheets filled isotactic polypropylene nanocomposites. composites. Part B. 2015;71:175–183.
   Web of Science ®Google Scholar
• Wang M, Deng XY, Du AK, et al. Poly (sodium 4-styrenesulfonate) modified graphene for reinforced biodegradable poly (ϵ-caprolactone) nanocomposites. RSC Adv. 2015;5:73146–73154.
   Web of Science ®Google Scholar
• Gan L, Qiu F, Hao YB, et al. Shear-induced orientation of functional graphene oxide sheets in isotactic polypropylene. J Mater Sci. 2016;51:5185–5195.
   Web of Science ®Google Scholar
• Li P, Chen X, Zeng JB, et al. Enhancement of the interfacial interaction between poly (vinyl chloride) and zinc oxide modified reduced graphene oxide. RSC Adv. 2016;6:5784–5791.
   Web of Science ®Google Scholar
• Chen YF, Tan YJ, Li J, et al. Graphene oxide-assisted dispersion of multi-walled carbon nanotubes in biodegradable poly (ϵ-caprolactone) for mechanical and electrically conductive enhancement. Polym Test. 2018;65:387–397.
   Web of Science ®Google Scholar
• Azadbakht M, Esmizadeh E, Vahidifar A, et al. Vapor phase modification for selective enrichment of grafted styrene/acrylonitrile onto carbon nanotubes via ATRP. Processes. 2021;9:1–15.
   Web of Science ®Google Scholar
• Azarifar D, Badalkhani O, Abbasi Y. Silica-modified magnetite Fe3O4 nanoparticles grafted with sulfamic acid functional groups: an efficient heterogeneous catalyst for the synthesis of 3, 4-dihydropyrimidin-2 (1H)-one and tetrahydrobenzo [b] pyran derivatives. J Sulfur Chem 2016;37:656–673.
   Web of Science ®Google Scholar
• Allahbakhsh A. Graphene-based advanced nanostructures. Handbook of graphene Set 1. New Jersey: Wiley; 2019.
   Google Scholar
• Sang J, Aisawa S, Muraoka H, et al. Direct functionalizing of acrylonitrile-butadiene rubber surfaces through different peroxide curing. React Funct Polym. 2020;146:104446.
   Web of Science ®Google Scholar
• Sanai Y, Kubota K. Effect of UV-curing conditions on the polymer structures: a comparison between coating and adhesive. Polym J. 2020;52:1153–1163.
   Web of Science ®Google Scholar
• Krejsa MR, Koenig JL. A review of sulfur crosslinking fundamentals for accelerated and unaccelerated vulcanization. Rubber Chem Technol. 1993;66:376–410.
   Web of Science ®Google Scholar
• Mahon A, Kemp TJ, Coates RJ. Thermal and photodegradation of MnO2-, NaBO3-and organic hydroperoxide-cured polysulfides: products and pathways. Polym Degrad Stab 1998;62:187–198.
   Web of Science ®Google Scholar
• Li X, Nie W, Xu Y, et al. Functionalized GO/polysulfide rubber composites with excellent comprehensive properties based interfacial optimum design. Compos Part B Eng. 2020;198:108234.
   Web of Science ®Google Scholar
• Krishnaveni K, Subadevi R, Sivakumar M, et al. Synthesis and characterization of graphene oxide capped sulfur/polyacrylonitrile composite cathode by simple heat treatment. J Sulfur Chem. 2019;40:377–388.
   Web of Science ®Google Scholar
• Mistry BD. A handbook of spectroscopic data chemistry. Jaipur: Oxford Book Company; 2009.
   Google Scholar
• Noein L, Haddadi-Asl V, Salami-Kalajahi M. Grafting of pH-sensitive poly (N,N-dimethylaminoethyl methacrylate-co-2-hydroxyethyl methacrylate) onto HNTS via surfaceinitiated atom transfer radical polymerization for controllable drug release. Int J Polym Mater Polym Biomater. 2017;66:123–131.
   Web of Science ®Google Scholar
• Bagherinia MA, Sheydaei M, Giahi M. Graphene oxide as a compatibilizer for polyvinyl chloride/rice straw composites. J Polym Eng. 2017;37:661–670.
   Web of Science ®Google Scholar
• Amirshaqaqi N, Salami-Kalajahi M, Mahdavian M. Corrosion behavior of aluminum/silica/ polystyrene nanostructured hybrid flakes. Iran Polym J. 2014;23:699–706.
   Web of Science ®Google Scholar
• Sharifzadeh E, Salami-Kalajahi M, Hosseini MS, et al. A temperature-controlled method to produce Janus nanoparticles using high internal interface systems: experimental and theoretical approaches. Colloids Surfaces A Physicochem Eng Asp. 2016;506:56–62.
   Web of Science ®Google Scholar
• Edraki M, Moghaddampour IM, Alinia-Ahandani E, et al. Ginger intercalated sodium montmorillonite nano clay: assembly, characterization, and investigation antimicrobial properties. Chem Rev Lett. 2021;4:120–129.
   Google Scholar
• Socrates G. Infrared and Raman characteristic group frequencies. 3th ed. New York (NY): Wiley; 2001.
   Google Scholar
• Argyropoulos DS, Hou Y, Ganesaratnam R, et al. Quantitative 1H NMR analysis of alkaline polysulfide solutions. Holzforschung. 2005;59:124–131.
   Web of Science ®Google Scholar
• Kariminejad B, Salami-Kalajahi M, Roghani-Mamaqani H. Thermophysical behaviour of matrix-grafted graphene/poly(ethylene tetrasulphide) nanocomposites. RSC Adv. 2015;5:100369–100377.
   Web of Science ®Google Scholar
• Edraki M, Sheydaei M, Alinia-Ahandani E, et al. Polyvinyl chloride: chemical modification and investigation of structural and thermal properties. J Sulfur Chem. 2021: 1–13. DOI:https://doi.org/10.1080/17415993.2021.1895996.
   Google Scholar
• Trofimov BA, Sinegovskaya LM, Gusarova NK. Vibrations of the S–S bond in elemental sulfur and organic polysulfides: a structural guide. J Sulfur Chem. 2009;30:518–554.
   Web of Science ®Google Scholar
• Anyszka R, Kozanecki M, Czaderna A, et al. Inverse vulcanization of sulfur with vinylic POSS. J Sulfur Chem. 2019;40:587–597.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis, characterization, curing, thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers. J Macromol Sci Part A Pure Appl Chem. 2021;58:344–352.
   Web of Science ®Google Scholar
• Hsieh CT, Pan YJ, Lin JH. Polypropylene/high-density polyethylene/carbon fiber composites: manufacturing techniques, mechanical properties, and electromagnetic interference shielding effectiveness. Fibers Polym. 2017;18:155–161.
   Web of Science ®Google Scholar
• Karataş MA, Gökkaya H. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials. Def Technol. 2018;14:318–326.
   Web of Science ®Google Scholar
• Kim BW, Nairn JA. Observations of fiber fracture and interfacial debonding phenomena using the fragmentation test in single fiber composites. J Compos Mater. 2002;36:1825–1858.
   Web of Science ®Google Scholar
• Tranchard P, Duquesne S, Samyn F, et al. Kinetic analysis of the thermal decomposition of a carbon fibre-reinforced epoxy resin laminate. J Anal Appl Pyrolysis. 2017;126:14–21.
   Web of Science ®Google Scholar
• Kim KW, Kim DK, Kim BS, et al. Cure behaviors and mechanical properties of carbon fiber-reinforced nylon6/epoxy blended matrix composites. Compos Part B Eng. 2017;112:15–21.
   Web of Science ®Google Scholar
• Lertwassana W, Parnklang T, Mora P, et al. High performance aramid pulp/carbon fiber-reinforced polybenzoxazine composites as friction materials. Compos Part B Eng. 2019;177:107280.
   Web of Science ®Google Scholar