Sodium sulfide-based polysulfide polymers: synthesis, cure, thermal and mechanical properties

References

• Abbasi A, Yahya WZ, Nasef MM, et al. Copolymerization of palm oil with sulfur using inverse vulcanization to boost the palm oil industry. Polym Polym Compos. 2021;29:S1446–S1456.
   Google Scholar
• Ghumman AS, Shamsuddin MR, Nasef MM, et al. Synthesis and characterization of sustainable inverse vulcanized copolymers from non-edible oil. ChemistrySelect. 2021;6(6):1180–1190.
   Google Scholar
• Abbasi A, Nasef MM, Yahya WZ, et al. Preparation and characterization of green polymer by copolymerization of corn oil and sulphur at molten state. Polym Polym Compos. 2021;29:1179–1190.
   Google Scholar
• Abbasi A, Nasef MM, Yahya WZ. Copolymerization of vegetable oils and bio-based monomers with elemental sulfur: A new promising route for bio-based polymers. Sustainable Chem Pharm. 2019;13:100158.
   Google Scholar
• Ghumman AS, Shamsuddin R, Nasef MM, et al. A degradable inverse vulcanized copolymer as a coating material for urea produced under optimized conditions. Polymers. 2021;13(22):4040.
   PubMedGoogle Scholar
• Ghumman AS, Nasef MM, Shamsuddin MR, et al. Evaluation of properties of sulfur-based polymers obtained by inverse vulcanization: techniques and challenges. Polym Polym Compos. 2021;29:1333–1352.
   Google Scholar
• Ghumman AS, Shamsuddin R, Nasef MM, et al. Optimization of synthesis of inverse vulcanized copolymers from rubber seed oil using response surface methodology. Polymer. 2021;219:123553.
   Google Scholar
• Abbasi A, Nasef MM, Yahya WZ. Sulfur-based polymers by inverse vulcanization: a novel path to foster green chemistry. Green Mater. 2020;8(4):172–180.
   Google Scholar
• Sheydaei M, Edraki M, Alinia-Ahandani E, et al. Poly(ethylene disulfide)/carbon fiber composites: cure and effect of fiber content on mechanical and thermal properties. J Sulfur Chem. 2021;42(6):614–627.
   Google Scholar
• Edraki M, Sheydaei M, Alinia-Ahandani E, et al. Polyvinyl chloride: chemical modification and investigation of structural and thermal properties. J Sulfur Chem. 2021;42(4):397–409.
   Web of Science ®Google Scholar
• Sheydaei M, Pouraman V, Alinia-Ahandani E, et al. PVCS/GOnanocomposites: investigation of thermophysical,: mechanical and antimicrobial properties. J Sulfur Chem. 2022;43(4):376–390.
   Google Scholar
• Sheydaei M, Edraki M, Alinia-Ahandani E, et al. Poly(p-xylene disulfide) andpoly(p-xylene tetrasulfide): synthesis, cure and investigation of mechanical and thermophysical properties.J Macromol Sci Part A Pure Appl Chem. 2021;58(1):52–58.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis of ethylene dichloride-based polysulfide polymers: investigation of polymerization yield and effect of sulfur content on solubility and flexibility. J Sulfur Chem. 2021;42(1):67–82.
   Web of Science ®Google Scholar
• Sheydaei M, Talebi S, Salami-Kalajahi M. Synthesis,: characterization, curing,thermophysical and mechanical properties of ethylene dichloride-based polysulfide polymers. J Macromol Sci Part A Pure Appl Chem. 2021;58(5):344–352.
   Web of Science ®Google Scholar
• Song B, Li J, Wu F, et al. Processing and characterization of silver-filled conductive polysulfide sealants for aerospace applications. Soft Matter. 2018;14:9036–9043.
   PubMedGoogle Scholar
• Zhang J, Chen J, Zhang Q, et al. One step synthesis of one dimensional nano MnO2 and their application as oxidizing agent for polysulfide polymers. J Inorg Organomet Polym Mater. 2019;29(4):1400–1406.
   Google Scholar
• Sheydaei M, Alinia-Ahandani E. Synthesis and characterization of methylene-xylenebased polysulfide block-copolymer/carbon nanotube nanocomposites via in situ polymerization method. J Sulfur Chem. 2020;41(4):421–434.
   Web of Science ®Google Scholar
• Nasrabadi HS, Kalaee MR, Abdouss M, et al. New role of layered silicates as phase transfer catalyst for In situ polymerization of poly(ethylenetetrasulfide) nanocomposite. J Inorg Organomet Polym Mater. 2013;23(4):950–957.
   Google Scholar
• Sheydaei M, Edraki M, Javanbakht S, et al. Poly(butylene disulfide) and poly(butylene tetrasulfide): synthesis, cure and investigation of polymerization yield and effect of sulfur content on mechanical and thermophysical properties. Phosphorus Sulfur Silicon Relat Elem. 2021;196(6):578–584.
   Google Scholar
• Mortazavian S, Saber A, Hong J, et al. Synthesis, characterization, and kinetic study of activated carbon modified by polysulfide rubber coating for aqueous hexavalent chromium removal.J. Ind. Eng. Chem. 2019;69:196–210.
   Web of Science ®Google Scholar
• Gao W, Bie M, Liu F, et al. Self-healable and reprocessable polysulfide sealants prepared from liquid polysulfide oligomer and epoxy resin. ACS Appl Mater Interfaces. 2017;9(18):15798–15808.
   PubMedGoogle Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Characterization of synthesized poly(aryldisulfide) through interfacial polymerization using phase-transfer catalyst. J Sulfur Chem. 2012;33(3):303–311.
   Web of Science ®Google Scholar
• Saroha R, Heo J, Li X, et al. Asymmetric separator integrated with ferroelectric-BaTiO3 and mesoporous-CNT for the reutilization of soluble polysulfide in lithium-sulfur batteries. J Alloys Compd. 2022;893:162272.
   Google Scholar
• Liu G, Zeng Q, Hua X, et al. A rational design of V2O3/VN heterostructures with high-efficient chemisorption and electrocatalytic activity for polysulfides in lithium-sulfur batteries. Mater Chem Phys. 2022;277:125578.
   Google Scholar
• Gao Z, Xue Z, Miao Y, et al. Tio2@ porous carbon nanotubes modified separator as polysulfide barrier for lithium-sulfur batteries. J. Alloys Compd. 2022;906:164249.
   Google Scholar
• Smith K, Al-Zuhairi AJ, El-Hiti GA, et al. Comparison of cyclic and polymeric disulfides as catalysts for the regioselective chlorination of phenols. J Sulfur Chem. 2015;36(1):74–85.
   Web of Science ®Google Scholar
• Smith K, El-Hiti GA, Al-Zuhairi AJ. The synthesis of polymeric sulfides by reaction of dihaloalkanes with sodium sulfide. J Sulfur Chem. 2011;32(6):521–531.
   Web of Science ®Google Scholar
• Smith K, Balakit AA, Pardasani RT, et al. New polymeric sulfide-borane complexes: convenient hydroborating and reducing reagents. J Sulfur Chem. 2011;32(4):287–295.
   Web of Science ®Google Scholar
• Sheydaei M, Edraki M, Mousazadeh Moghaddampour I, et al. Poly(butylene trisulfide)/SiO2 nanocomposites: cure and effect of SiO2 content on mechanical and thermophysical properties. J Sulfur Chem. 2022;43(4):413–425.
   Google Scholar
• Smith K, Hegazy AS. El-Hiti GA. para-Selective chlorination of cresols and m-xylenol using sulfuryl chloride in the presence of poly(alkylene sulfide)s. J Sulfur Chem. 2020;41(4):345–356.
   Web of Science ®Google Scholar
• Smith K, Hegazy AS, El-Hiti GA. The use of polymeric sulfides as catalysts for the para-regioselective chlorination of phenol and 2-chlorophenol. J Sulfur Chem. 2020;41(1):1–12.
   Web of Science ®Google Scholar
• Zhang R, Nie T, Fang Y, et al. Poly(disulfide)s: from Synthesis to drug delivery. Biomacromolecules. 2021;23(1):1–9.
   PubMedGoogle Scholar
• Liang Y, Xu X, Xu L, et al. Non-surgical osteoarthritis therapy, intra-articular drug delivery towards clinical applications. J Drug Targeting. 2021;29(6):609–616.
   PubMedGoogle Scholar
• Wei H, Zhuo RX, Zhang XZ. Design and development of polymeric micelles with cleavable links for intracellular drug delivery. Prog Polym Sci. 2013;38(3-4):503–535.
   Web of Science ®Google Scholar
• Sang P, Si Y, Fu Y. Polyphenyl polysulfide: a new polymer cathode material for Li-S batteries. Chem Commun. 2019;55(33):4857–4860.
   PubMedGoogle Scholar
• RaaijmakersMJ B. Current trends in interfacial polymerization chemistry. Prog Polym Sci. 2016;63:86–142.
   Google Scholar
• Sheydaei M, Kalaee MR, Allahbakhsh A, et al. Synthesis and characterization of poly(p-xylylene tetrasulfide) via interfacial polycondensation in the presence of phase transfer catalysts. Des Monomers Polym. 2013;16(2):191–196.
   Web of Science ®Google Scholar
• Sheydaei M, Allahbakhsh A, Haghighi AH, et al. Synthesis and characterization of poly(methylene disulfide) and poly(ethylene disulfide) polymers in the presence of a phase transfer catalyst. J Sulfur Chem. 2014;35(1):67–73.
   Web of Science ®Google Scholar
• Sheydaei M, Jabari H, Ali-Asgari Dehaghi H. Synthesis and characterization ofethylene-xylene-based polysulfide block-copolymers using the interfacial polymerization method. J Sulfur Chem. 2016;37(6):646–655.
   Web of Science ®Google Scholar
• Bertozzi ER. Chemistry and technology of elastomeric polysulfide polymers. Rubber Chem Technol. 1968;41(1):114–160.
   Google Scholar
• Usmani AM. Chemistry and technology of polysulfide sealants. Polym Plast Technol Eng. 1982;19(2):165–199.
   Web of Science ®Google Scholar
• Boyd DA. Sulfur and its role in modern materials science. Angew Chem Int Ed. 2016;55(50):15486–15502.
   PubMed Web of Science ®Google Scholar
• Joseph AM, George B, Madhusoodanan KN, et al. Current status of sulphur vulcanization and devulcanization chemistry: process of vulcanization. Rubber Sci. 2015;28:82–121.
   Google Scholar
• Mistry BD. A handbook of spectroscopic data chemistry. Jaipur: Oxford Book Company; 2009.
   Google Scholar
• Bagherinia MA, Sheydaei M, Giahi M. Graphene oxide as a compatibilizer for polyvinyl chloride/rice straw composites. J Polym Eng. 2017;37(7):661–670.
   Google Scholar
• Edraki M, Moghaddampour IM, Alinia-Ahandani E, et al. Ginger intercalated sodium montmorillonite nano clay: assembly, characterization, and investigation antimicrobialproperties. Chem Rev Lett. 2021;4:120–129.
   Google Scholar
• Akiba MA, Hashim AS. Vulcanization and crosslinking in elastomers. Prog Polym Sci 1997;22(3):475–521.
   Web of Science ®Google Scholar
• Martin SM, Patrick JC. On synthetic resins and plastics constitution of polysulfide rubbers. Ind Eng Chem. 1936;28(10):1144–1149.
   Google Scholar
• Fettes EM, Jorczak JS. Polysulfide polymers. Rubber Chem Technol. 1951;24(3):709–723.
   Google Scholar
• Kruželák J, Sýkora R, Hudec I. Sulphur and peroxide vulcanisation of rubber compounds-overview. Chem. Pap. 2016;70:1533–1555.
   Web of Science ®Google Scholar