Advances in additive manufacturing processes and their use for the fabrication of lower limb prosthetic devices

References

• Casolo F, Cinquemani S, Giberti H. Optimization of Myoelectric Elbow Prosthesis Transmission [Internet]. Int J Appl Eng Res. 2017 [cited 2017 Jan 01]. Available from: http://www.ripublication.com
   Google Scholar
• Kuiken TA, Miller LA, Turner K, et al. A Comparison of Pattern Recognition Control and Direct Control of a Multiple Degree-of-Freedom Transradial Prosthesis. IEEE J Transl Eng Health Med. 2016;4:1–8.
   Google Scholar
• Pandit S, Godiyal AK, Vimal AK, et al. An affordable insole-sensor-based trans-femoral prosthesis for normal gait. In: Sensors. Switzerland: MDPI. 2018. p. 18.
   Google Scholar
• Tavangarian F. The Need to Fabricate Lower Limb Prosthetic Devices by Additive Manufacturing. Biomed J Sci Tech Res. 2019;15(5):11662–11673.
   Google Scholar
• Guidelines for Training Personnel in Developing Countries for Prosthetics and Orthotics Services World Health Organization. 2004.
   Google Scholar
• Bhatt S, Godiyal A, Joshi D, et al. Design analysis and fatigue life prediction of an indigenously developed affordable knee prosthesis. In: Lecture Notes in Mechanical Engineering. Springer Science and Business Media Deutschland GmbH. Springer. 2021. p. 3–13.
   Google Scholar
• Hull CW, Arcadia C. United States Patent (19) Hull (54) (75) (73) 21) 22 (51) 52) (58) (56) Apparatus for Production of Three-Dimensonal Objects by Stereo-Lithography.
   Google Scholar
• Murphy SV, Atala A. 3D bioprinting of tissues and organs. In: Nat Biotechnol. Nature Publishing Group. 2014. p. 773–785.
   Google Scholar
• Qin Z, Compton BG, Lewis JA, et al. Structural optimization of 3D-printed synthetic spider webs for high strength. Nat Commun. 2015;6(1):1–7.
   Google Scholar
• El Assal R, Chen P, Guven S, et al. Towards artificial tissue models: past, present, and future of 3D bioprinting Towards Artificial Tissue Models: past, Present, and Future of 3-D Bioprinting 1 2 Ahu Arslan-Yildiz 1#.
   Google Scholar
• Yu C, Ma X, Zhu W, et al. Scanningless and continuous 3D bioprinting of human tissues with decellularized extracellular matrix. Biomaterials. 2019;194:1–13.
   PubMed Web of Science ®Google Scholar
• Cui H, Nowicki M, Fisher JP, et al. 3D Bioprinting for Organ Regeneration. Adv Healthc Mater. 2017;6(1):1601118.
   Web of Science ®Google Scholar
• Ranganathan R, Mohan SKP, Pugalendhi A, et al. Design and development of a prosthetic leg for an amputated peacock using additive manufacturing Design and development of a prosthetic leg for an amputated peacock. International Journal of Rapid Manufacturing. 2018;7(4):356.
   Google Scholar
• Cha YH, Lee KH, Ryu HJ, et al. Ankle-foot orthosis made by 3D printing technique and automated design software. Appl Bionics Biomech. 2017;2017.
   PubMed Web of Science ®Google Scholar
• Rahmati S, Abbaszadeh F, Farahmand F. An improved methodology for design of custom-made Hip prostheses to be fabricated using additive manufacturing technologies. Rapid Prototyp J. 2012;18(5):389–400.
   Web of Science ®Google Scholar
• Liaw C-Y, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017;9:024102.
   PubMed Web of Science ®Google Scholar
• Zein I, Hutmacher DW, Cheng Tan K, et al. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials. 2002;23(4):1169–1185.
   PubMed Web of Science ®Google Scholar
• Chia HN, Wu BM. Recent advances in 3D printing of biomaterials. J Biol Eng. 2015;9(1):1–14.
   PubMed Web of Science ®Google Scholar
• Chen M, Le DQS, Kjems J, et al. Improvement of Distribution and Osteogenic Differentiation of Human Mesenchymal Stem Cells by Hyaluronic Acid and β-Tricalcium Phosphate-Coated Polymeric Scaffold in Vitro. Biores Open Access. 2015;4:363–373.
   PubMed Web of Science ®Google Scholar
• Naghieh S, Karamooz Ravari MR, Badrossamay M, et al. Numerical investigation of the mechanical properties of the additive manufactured bone scaffolds fabricated by FDM: the effect of layer penetration and post-heating. J Mech Behav Biomed Mater. 2016;59:241–250.
   PubMed Web of Science ®Google Scholar
• Sa M, Nguyen BB, Moriarty RA, et al. Fabrication and evaluation of 3D printed BCP scaffolds reinforced with ZrO 2 for bone tissue applications. Biotechnol Bioeng. 2018;115:989–999.
   PubMed Web of Science ®Google Scholar
• Zhang L, Yang G, Johnson BN, et al. Three-dimensional (3D) printed scaffold and material selection for bone repair. Acta Biomater. Acta Materialia Inc. 2019;84:16–33.
   PubMed Web of Science ®Google Scholar
• Bae EJ, Kim JH, Kim WC, et al. Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering. J Adv Prosthodontics. 2014;6:266–271.
   PubMed Web of Science ®Google Scholar
• Shuai C, Zhuang J, Hu H, et al. In vitro bioactivity and degradability of β-tricalcium phosphate porous scaffold fabricated via selective laser sintering. Biotechnol Appl Biochem. 2013;60:266–273.
   PubMed Web of Science ®Google Scholar
• Sun H, He S, Wu P, et al. A novel MgO-CaO-SiO2 system for fabricating bone scaffolds with improved overall performance. Materials. 2016;9.
   Web of Science ®Google Scholar
• Melchels FPW, Feijen J, Grijpma DW. A review on stereolithography and its applications in biomedical engineering. Biomaterials. 2010;31:6121–6130.
   PubMed Web of Science ®Google Scholar
• Lee K-W, Wang S, Fox BC, et al. Poly(propylene fumarate) Bone Tissue Engineering Scaffold Fabrication Using Stereolithography: effects of Resin Formulations and Laser Parameters. Biomacromolecules. 2007;8:1077–1084.
   PubMed Web of Science ®Google Scholar
• Elomaa L, Teixeira S, Hakala R, et al. Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography. Acta Biomater. 2011;7:3850–3856.
   PubMed Web of Science ®Google Scholar
• Ronca A, Ambrosio L, Grijpma DW. Design of porous three-dimensional PDLLA/nano-hap composite scaffolds using stereolithography. J Appl Biomater Funct Mater. 2012;10:249–258.
   PubMed Web of Science ®Google Scholar
• Ronca A, Ambrosio L, Grijpma DW. Preparation of designed poly(d,l-lactide)/nanosized hydroxyapatite composite structures by stereolithography. Acta Biomater. 2013;9:5989–5996.
   PubMed Web of Science ®Google Scholar
• Kim K, Dean D, Wallace J, et al. The influence of stereolithographic scaffold architecture and composition on osteogenic signal expression with rat bone marrow stromal cells. Biomaterials. 2011;32:3750–3763.
   PubMed Web of Science ®Google Scholar
• Lee JW, Kang KS, Lee SH, et al. Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. Biomaterials. 2011;32:744–752.
   PubMed Web of Science ®Google Scholar
• Tee YL, Peng C, Pille P, et al. PolyJet 3D Printing of Composite Materials: experimental and Modelling Approach. JOM. 2020;72:1105–1117.
   Web of Science ®Google Scholar
• Yang H, Lim JC, Liu Y, et al. Performance evaluation of ProJet multi-material jetting 3D printer. Virtual Phys Prototyp. 2017;12:95–103.
   Web of Science ®Google Scholar
• Alifui‐Segbaya F, Foley P, Williams RJ. The corrosive effects of artificial saliva on cast and rapid manufacture‐produced cobalt chromium alloys. Rapid Prototyp J. 2013;19:95–99.
   Web of Science ®Google Scholar
• Mehboob H, Chang S-H. Application of composites to orthopedic prostheses for effective bone healing: a review. Compos Struct. 2014;118:328–341.
   Web of Science ®Google Scholar
• Brandt M. Laser Additive Manufacturing Materials, Design, Technologies, and Applications. Elsevier Science; 2016.
   Google Scholar
• Wauthle R, van der Stok J, Amin Yavari S, et al. Additively manufactured porous tantalum implants. Acta Biomater. 2015;14:217–225.
   PubMed Web of Science ®Google Scholar
• Matena J, Petersen S, Gieseke M, et al. Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL. Int J Mol Sci. 2015;16:13287–13301.
   PubMed Web of Science ®Google Scholar
• Mazzoli A, Ferretti C, Gigante A, et al. Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering. Rapid Prototyp J. 2015;21:386–392.
   Web of Science ®Google Scholar
• Chen Q, Mangadlao JD, Wallat J, et al. 3D Printing Biocompatible Polyurethane/Poly(lactic acid)/Graphene Oxide Nanocomposites: anisotropic Properties. ACS Appl Mater Interfaces. 2017;9:4015–4023.
   PubMed Web of Science ®Google Scholar
• Guo T, Holzberg TR, Lim CG, et al. 3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution. Biofabrication. 2017;9:024101.
   PubMed Web of Science ®Google Scholar
• Kumar PK, Charan M, Kanagaraj S. Trends and Challenges in Lower Limb Prosthesis. IEEE Potentials. 2017;36:19–23.
   Google Scholar
• South BJ, Fey NP, Bosker G, et al. Manufacture of Energy Storage and Return Prosthetic Feet Using Selective Laser Sintering. J Biomech Eng. 2010;132(1).
   PubMed Web of Science ®Google Scholar
• Rheaume D, Hoffman AH, Advisor M, et al. Testing and Analysis of Low Cost Prosthetic Feet A Major Qualifying Project Report. 2008.
   Google Scholar
• Lenzi T, Cempini M, Hargrove L, et al. Design, development, and testing of a lightweight hybrid robotic knee prosthesis. Int J Rob Res. 2018;37:953–976.
   Web of Science ®Google Scholar
• Elery T, Rezazadeh S, Nesler C, et al. Design and Validation of a Powered Knee–Ankle Prosthesis With High-Torque, Low-Impedance Actuators. IEEE Trans Rob. 2020;36:1649–1668.
   PubMed Web of Science ®Google Scholar
• Lawson BE, Mitchell J, Truex D, et al. A Robotic Leg Prosthesis: design, Control, and Implementation. IEEE Robot Autom Mag. 2014;21:70–81.
   Web of Science ®Google Scholar
• Liu M, Zhang F, Datseris P, et al. Improving Finite State Impedance Control of Active-Transfemoral Prosthesis Using Dempster-Shafer Based State Transition Rules. J Intell Robot Syst. 2014;76:461–474.
   Web of Science ®Google Scholar
• Pfeifer S, Pagel A, Riener R, et al. Actuator With Angle-Dependent Elasticity for Biomimetic Transfemoral Prostheses. IEEE ASME Trans Mechatron. 2015;20:1384–1394.
   Web of Science ®Google Scholar
• Pillai MV, Kazerooni H, Hurwich A. Design of a semi-active knee-ankle prosthesis. 2011 IEEE International Conference on Robotics and Automation. Shanghai, China: IEEE; 2011. p.5293–5300.
   Google Scholar
• Waycaster G, Wu S-K, Shen X. Design and Control of a Pneumatic Artificial Muscle Actuated Above-Knee Prosthesis. J Med Device. 2011;5(3).
   PubMedGoogle Scholar
• Ledoux ED, Goldfarb M. Control and Evaluation of a Powered Transfemoral Prosthesis for Stair Ascent. IEEE Transactions on Neural Systems and Rehabilitation Engineering. 2017;25:917–924.
   Google Scholar
• Arelekatti VNM, Winter AGV. Design of a fully passive prosthetic knee mechanism for transfemoral amputees in India. 2015 IEEE International Conference on Rehabilitation Robotics (ICORR), Nanyang Technological University, Singapore. IEEE; 2015. p. 350–356.
   Google Scholar
• Sam M, Childress D, Hansen A, et al. The “Shape&Roll” Prosthetic Foot: i. Design and Development of Appropriate Technology for Low-Income Countries. Med Confl Surviv. 2004;20:294–306.
   PubMedGoogle Scholar
• Cherelle P, Grosu V, Flynn L, et al. The Ankle Mimicking Prosthetic Foot 3—Locking mechanisms, actuator design, control and experiments with an amputee. Rob Auton Syst. 2017;91:327–336.
   Web of Science ®Google Scholar
• Tao Z, Ahn H-J, Lian C, et al. Design and optimization of prosthetic foot by using polylactic acid 3D printing. J Mech Sci Technol. 2017;31:2393–2398.
   Web of Science ®Google Scholar
• Cherelle P, Grosu V, Matthys A, et al. Design and Validation of the Ankle Mimicking Prosthetic (AMP-) Foot 2.0. IEEE Transactions on Neural Systems and Rehabilitation Engineering. 2014;22:138–148.
   Google Scholar
• Willson AM, Richburg CA, Czerniecki J, et al. Design and Development of a Quasi-Passive Transtibial Biarticular Prosthesis to Replicate Gastrocnemius Function in Walking. J Med Device. 2020;14(2).
   PubMedGoogle Scholar
• Song Y, Choi S, Kim S, et al. Performance Test for Laminated-Type Prosthetic Foot with Composite Plates. Int J Precis Eng Manuf. 2019;20:1777–1786.
   Web of Science ®Google Scholar
• Galvao JR, Zamarreno CR, Martelli C, et al. Strain Mapping in Carbon-Fiber Prosthesis Using Optical Fiber Sensors. IEEE Sens J. 2017;17:3–4.
   Web of Science ®Google Scholar
• Rusu L, Toth-Taşcău M, Toader-Pasti C. Dynamic Analysis of a Lower Limb Prosthesis. Appl Mech Mater. 2013;430:230–234.
   Google Scholar
• Robert G, Kerry A, Julie C, et al. Review of secondary physical conditions associated with lower-limb amputation and long-term prosthesis use. 2008.
   Google Scholar
• Oudenhoven LM, Boes JM, Hak L, et al. Regulation of step frequency in transtibial amputee endurance athletes using a running-specific prosthesis. J Biomech. 2017;51:42–48.
   PubMed Web of Science ®Google Scholar
• Berke GM, Fergason J, Milani JR, et al. Comparison of satisfaction with current prosthetic care in veterans and servicemembers from Vietnam and OIF/OEF conflicts with major traumatic limb loss. J Rehabil Res Dev. 2010;47:361–372.
   PubMed Web of Science ®Google Scholar
• Jin Y, Plott J, Chen R, et al. Additive Manufacturing of Custom Orthoses and Prostheses – a Review. Procedia CIRP. 2015;36:199–204.
   Google Scholar
• Pitkin MR. Lower Limb Prosthesis. In: Pitkin MR, editors. Biomechanics of Lower Limb Prosthetics. Berlin Heidelberg: Springer Berlin Heidelberg; 2010. p. 1–27.
   Google Scholar
• Chen RK, Jin Y, Wensman J, et al. Additive manufacturing of custom orthoses and prostheses—A review. Addit Manuf. 2016;12:77–89.
   Web of Science ®Google Scholar
• Abbas SM, Takhakh AM, Abdullah Al-Shammari M, et al. Manufacturing and Analysis of Ankle Disarticulation Prosthetic Socket (SYMES). Int J Mech Eng Tech (IJMET). 2018;9:560–569.
   Google Scholar
• Abbas SM, Abbas MH. Analysis and manufacturing of above knee prosthesis socket by using revo fit solution. IOP Conf Ser Mater Sci Eng. 2018;454:012025.
   Google Scholar
• Rogers WE, Crawford RH, Beaman JJ, et al. Fabrication of Prosthetic Sockets by Selective Laser Sintering. The University of Texas at Austin. 1991.
   Google Scholar
• Stephens S, Crawford R, Rogers W, et al. Manufacture of Compliant Prosthesis Sockets Using Selective Laser Sintering.
   Google Scholar
• Faustini MC, Crawford RH, Neptune RR, et al. Design and Analysis of Orthogonally Compliant Features for Local Contact Pressure Relief in Transtibial Prostheses. J Biomech Eng. 2005;127:946–951.
   PubMed Web of Science ®Google Scholar
• Faustini MC, Neptune RR, Crawford RH, et al. An experimental and theoretical framework for manufacturing prosthetic sockets for transtibial amputees. IEEE Trans Neural Syst Rehabil Eng. 2006;14:304–310.
   PubMed Web of Science ®Google Scholar
• Montgomery JT, Vaughan MR, Crawford RH. Design of an actively actuated prosthetic socket. Rapid Prototyp J. 2010;16:194–201.
   Web of Science ®Google Scholar
• Sengeh DM, Herr H, Variable-Impedance Prosthetic A. Socket for a Transtibial Amputee Designed from Magnetic Resonance Imaging Data. JPO J Prosthetics Orthotics. 2013;25:129–137.
   Google Scholar
• Vitali A, Regazzoni D, Rizzi C, et al. Design and Additive Manufacturing of Lower Limb Prosthetic Socket. Systems, Design, and Complexity. Florida, USA: American Society of Mechanical Engineers. 2017; Vol. 11.
   Google Scholar
• Stenvall E, Flodberg G, Pettersson H, et al. Additive Manufacturing of Prostheses Using Forest-Based Composites. Bioengineering. 2020;7:103.
   PubMedGoogle Scholar
• Ramakrishnan T, Schlafly M, Reed KB. Evaluation of 3D printed anatomically scalable transfemoral prosthetic knee. 2017 International Conference on Rehabilitation Robotics (ICORR), London. IEEE; 2017. p. 1160–1164.
   Google Scholar
• European Conference on Design4Health (March: 2015: Sheffield), Christer Kirsty. Design4Health proceedings of the conference. Sheffield Hallam University; 2015.
   Google Scholar
• Rochlitz B, Pammer D. Design and Analysis of 3D Printable Foot Prosthesis. Periodica Polytech Mech Eng. 2017;61:282.
   Google Scholar
• Warder HH, Fairley JK, Coutts J, et al. Examining the viability of carbon fiber reinforced three-dimensionally printed prosthetic feet created by composite filament fabrication. Prosthet Orthot Int. 2018;42:644–651.
   PubMed Web of Science ®Google Scholar
• Rochlitz B, Pammer D, Functionality KR. Load-bearing analysis of 3D-printed prosthetic feet. Mater Today Proc. 2018;5:26566–26571.
   Google Scholar
• Pallari JHP, Dalgarno KW, Woodburn J. Mass customization of foot orthoses for rheumatoid arthritis using selective laser sintering. IEEE Trans Biomed Eng. 2010;57:1750–1756.
   PubMed Web of Science ®Google Scholar
• Sun S-P, Chou Y-J, Sue -C-C. Classification and mass production technique for three-quarter shoe insoles using non-weight-bearing plantar shapes. Appl Ergon. 2009;40:630–635.
   PubMed Web of Science ®Google Scholar
• Faustini MC, Neptune RR, Crawford RH, et al. Manufacture of passive dynamic ankle–foot orthoses using selective laser sintering. IEEE Trans Biomed Eng. 2008;55:784–790.
   PubMed Web of Science ®Google Scholar
• Mavroidis C, Ranky RG, Sivak ML, et al. Patient specific ankle-foot orthoses using rapid prototyping. J Neuroeng Rehabil. 2011;8:1.
   PubMed Web of Science ®Google Scholar
• Subburaj K, Nair C, Rajesh S, et al. Rapid development of auricular prosthesis using CAD and rapid prototyping technologies. Int J Oral Maxillofac Surg. 2007;36:938–943.
   PubMed Web of Science ®Google Scholar
• Liacouras P, Garnes J, Roman N, et al. Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent. 2011;105:78–82.
   PubMed Web of Science ®Google Scholar
• Paterson AM, Bibb R, Campbell RI, et al. Comparing additive manufacturing technologies for customised wrist splints. Rapid Prototyp J. 2015;21:230–243.
   Web of Science ®Google Scholar
• Zanetti EM, Aldieri A, Terzini M, et al. Additively manufactured custom load-bearing implantable devices: grounds for caution. Australas Med J. Australasian Medical Journal Pty Ltd. 2017;10(8):694–700.
   Web of Science ®Google Scholar
• Dalley SA, Wiste TE, Withrow TJ, et al. Design of a multifunctional anthropomorphic prosthetic hand with extrinsic actuation. IEEE ASME Trans Mechatron. 2009;14:699–706.
   Web of Science ®Google Scholar
• Christ S, Schnabel M, Vorndran E, et al. Fiber reinforcement during 3D printing. Mater Lett. 2015;139:165–168.
   Web of Science ®Google Scholar
• Zuniga J, Katsavelis D, Peck J, et al. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences. BMC Res Notes. 2015;8:10.
   PubMedGoogle Scholar
• Leddy MT, Belter JT, Gemmell KD, et al. Lightweight custom composite prosthetic components using an additive manufacturing-based molding technique. 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Milano, Italy. IEEE; 2015. p. 4797–4802.
   Google Scholar
• Laszczak P, Jiang L, Bader DL, et al. Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications. Med Eng Phys. 2015;37:132–137.
   PubMed Web of Science ®Google Scholar
• Saleh JM. Cost modelling of rapid manufacturing based mass customization system for fabrication of custom foot orthoses. 2013.
   Google Scholar
• Hsu LH, Huang GF, Lu CT, et al. The development of a rapid prototyping prosthetic socket coated with a resin layer for transtibial amputees. Prosthet Orthot Int. 2010;34:37–45.
   PubMed Web of Science ®Google Scholar
• Rogers B, Bosker GW, Crawford RH, et al. Advanced trans-tibial socket fabrication using selective laser sintering. Prosthet Orthot Int. 2007;31:88–100.
   PubMed Web of Science ®Google Scholar