Reaction sintering of alumina/mullite nanocomposites from nano-sized starting powders

References

• K. Niihara: ‘New design concept of structural ceramics—ceramic nanocomposites’, J. Ceram. Soc. Jpn., 1991, 99, 974–982. doi: 10.2109/jcersj.99.974
   Web of Science ®Google Scholar
• H. Schneider and S. Komarneni: ‘Mullite’, 141–154; 2005, Weinheim, Wiley-VCH Verlag GmbH & Co. KGaA.
   Google Scholar
• H. H. Luo, F. C. Zhang and S. G. Roberts: ‘Wear resistance of reaction sintered alumina/mullite composites’, Mat. Sci. Eng. A.-Struct., 2008, 478, 270–275. doi: 10.1016/j.msea.2007.05.104
   Web of Science ®Google Scholar
• P. Švančárek, S. Lendvayová, D. Galusek, M. Hnatko, I. Vávra and X. Wang: ‘Abrasive wear resistance of SiO2-doped polycrystalline alumina’, Wear, 2011, 271, 760–769. doi: 10.1016/j.wear.2011.03.016
   Web of Science ®Google Scholar
• O. Burgo-Montes, R. Moreno and C. Baudín: ‘Effect of mullite additions on fracture mode of alumina’, J. Eur. Ceram. Soc., 2010, 30, 857–863. doi: 10.1016/j.jeurceramsoc.2009.10.013
   Web of Science ®Google Scholar
• F. C. Zhang, H. H. Luo, T. S. Wang, M. Zhang and Y. N. Sun: ‘Stress state and fracture behavior of alumina–mullite intragranular particulate composites’, Compos. Sci. Technol., 2008, 68, (15–16), 3245–3250. doi: 10.1016/j.compscitech.2008.08.012
   Web of Science ®Google Scholar
• K. Hemra and P. Aungkavattana: ‘Effect of zirconia content on mechanical and thermal properties of mullite–zirconia composites’, Adv. Appl. Ceram., 2014, 113, (6), 323–327. doi: 10.1179/1743676114Y.0000000164
   Web of Science ®Google Scholar
• S. M. Naga, A. M. Hassan, H. F. El-Maghraby, M. Awaad and H. Elsayed: ‘In-situ sintering reaction of Al2O3–LaAl11O18–ZrO2 composite’, Int. J. Refract. Met. Hard Mater., 2016, 54, 230–236. doi: 10.1016/j.ijrmhm.2015.07.026
   Web of Science ®Google Scholar
• S. A. Barseghyan and Y. Sakka: ‘Mechanochemical activation of aluminum powder and synthesis of alumina based ceramic composites’, Ceram. Int., 2013, 39, 8141–8146. doi: 10.1016/j.ceramint.2013.03.087
   Web of Science ®Google Scholar
• Y. Wang, H. Liu, H. Cheng and J. Wang: ‘Densification behavior and microstructure of mullite obtained from diphasic Al2O3–SiO2 gels’, Ceram. Int., 2014, 40, 12789–12796. doi: 10.1016/j.ceramint.2014.04.133
   Web of Science ®Google Scholar
• Y. Sakka, D. D. Bidinger and I. A. Askay: ‘Processing of silicon carbide–mullite–alumina nanocomposites’, J. Am. Ceram. Soc., 1995, 78, 479–486. doi: 10.1111/j.1151-2916.1995.tb08827.x
   Web of Science ®Google Scholar
• J. L. Ortiz-Merino and R. I. Todd: ‘Relationship between wear rate, surface pullout and microstructure during abrasive wear of alumina and alumina/SiC nanocomposites’, Acta Mater., 2005, 53, 3345–3357. doi: 10.1016/j.actamat.2005.03.031
   Web of Science ®Google Scholar
• G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall: ‘A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements’, J. Am. Ceram. Soc., 1981, 64, 533–538. doi: 10.1111/j.1151-2916.1981.tb10320.x
   Web of Science ®Google Scholar
• R. Riedel, L. Toma, C. Fasel and G. Miehe: ‘Polymer-derived mullite–SiC-based nanocomposites’, J. Eur. Ceram. Soc., 2009, 29, 3079–3090. doi: 10.1016/j.jeurceramsoc.2009.05.016
   Web of Science ®Google Scholar
• N. Louet, H. Reveron and G. Fantozzi: ‘Sintering behaviour and microstructural evolution of ultrapure α-alumina containing low amounts of SiO2’, J. Eur. Ceram. Soc., 2008, 28, 205–215. doi: 10.1016/j.jeurceramsoc.2007.04.015
   Web of Science ®Google Scholar
• D. Galusek, P. C. Twigg and F. L. Riley: ‘Wet erosion of liquid phase sintered alumina’, Wear, 1999, 233–235, 588–595. doi: 10.1016/S0043-1648(99)00236-7
   Web of Science ®Google Scholar
• A. Limpichaipanit, S. Jiansirisomboon and T. Tunkasiri: ‘Sintering temperature–microstructure–property relationships of alumina matrix composites with silicon carbide and silica additives’, Sci. Eng. Compos. Mater. doi: 10.1515/secm-2014-0353.
   Web of Science ®Google Scholar
• A. Limpichaipanit and R. I. Todd: ‘The relationship between microstructure, fracture and abrasive wear in Al2O3/SiC nanocomposites and microcomposites containing 5 and 10% SiC’, J. Eur. Ceram. Soc., 2009, 29, 2841–2848. doi: 10.1016/j.jeurceramsoc.2009.03.023
   Web of Science ®Google Scholar
• A. J. Winn and R. I. Todd: ‘Microstructural requirements for alumina–SiC nanocomposites’, Brit. Ceram. Trans., 1999, 98, 219–224. doi: 10.1179/096797899680471
   Web of Science ®Google Scholar
• B. R. Marple and D. J. Green: ‘Mullite/alumina particulate composites by infiltration processing: III, mechanical properties’, J. Am. Ceram. Soc., 1991, 74, 2453–2459. doi: 10.1111/j.1151-2916.1991.tb06784.x
   Web of Science ®Google Scholar
• S. Jiao, M. L. Jenkins and R. W. Davidge: ‘Electron microscopy of crack/particle interactions in Al2O3/SiC nanocomposites’, J. Microsc., 1997, 185, 259–264. doi: 10.1046/j.1365-2818.1997.d01-610.x
   Web of Science ®Google Scholar
• J. Sedláček, D. Galusek, P. Švančárek, R. Riedel, A. Atkinson and X. Wang: ‘Abrasive wear of Al2O3–SiC and Al2O3–(SiC)–C composites with micrometer- and submicrometer-sized alumina matrix grains’, J. Eur. Ceram. Soc., 2008, 28, 2983–2993. doi: 10.1016/j.jeurceramsoc.2008.04.018
   Web of Science ®Google Scholar
• P. Hvizdoš, P. Tatarko, A. Duszova and J. Dusza: ‘Failure mechanisms of ceramic nanocomposites’, in 'Ceramic Nanocomposites', (ed. R. Banerjee and R. Manna), 117–152 2013, Cambridge, Woodhead Publishing.
   Google Scholar