References
- S. R. Choi and N. P. Bansal: ‘Mechanical behavior of zirconia/alumina composites', Ceram. Int., 2005, 31, 39–46. doi: 10.1016/j.ceramint.2004.03.032
- W. Huang, P. Shuk, M. Greenblatt, M. Groft, F. Chen and M. Liu: ‘Structural and electrical characterization of a novel mixed conductor: CeO2-Sm2O3-ZrO2 solid solution’, J. Electrochem. Soc., 2000, 147, 4196–4202. doi: 10.1149/1.1394040
- K. C. Radford and R.J. Bratton: ‘Zirconia electrolyte cells', J. Mater. Sci., 1979, 14, 59–65. doi: 10.1007/BF01028328
- H. W. Koo, H. J. Park, G. M. Choi and H. G. Lee: ‘Electrochemical deoxidation of molten steel with application of an oxygen permeable membrane’, ISIJ Int., 2007, 47, 689–698. doi: 10.2355/isijinternational.47.689
- X. J. Chen, K. Z. Khor, S. H. Chan and L. G. Yu: ‘Influence of microstructure on the ionic conductivity of yttria-stabilized zirconia electrolyte’, Mater. Sci. Eng., 2002, 335, 246–252. doi: 10.1016/S0921-5093(01)01935-9
- T. Tojo, H. Kawaji and T. Atake: ‘Molecular dynamics study on lattice vibration and heat capacity of yttria-stabilized zirconia’, Solid State Ionics, 1999, 118, 349–353. doi: 10.1016/S0167-2738(98)00424-X
- W. Worrell and Q. Liu: ‘Development of an extended-life oxygen sensor for iron and steel melts', Solid State Ionics, 1990, 40, 761–763. doi: 10.1016/0167-2738(90)90115-8
- M. Zhou and A. Ahmad: ‘Synthesis, processing and characterization of calcia-stabilized zirconia solid electrolytes for oxygen sensing applications', Mater. Res. Bulletin, 2006, 41, 690–696. doi: 10.1016/j.materresbull.2005.10.018
- T. Oota and I. Yamai: ‘Thermal expansion behavior of NaZr4 (PO4)3 type compounds', J. Am. Ceram. Soc., 1986, 69, 1–6. doi: 10.1111/j.1151-2916.1986.tb04682.x
- S. P. S. Badwal: ‘Zirconia-based solid electrolytes: microstructure, stability and ionic conductivity’, Solid State Ionics, 1992, 52, 23–32. doi: 10.1016/0167-2738(92)90088-7
- J. H. Lee, T. Mori, J. G. Li, T. Ikegami and S. Takenouchi: ‘The influence of alumina addition and its distribution upon grain-boundary conduction in 15 mol.% calcia-stabilized zirconia’, Ceram. Int., 2001, 27, 269–276. doi: 10.1016/S0272-8842(00)00075-4
- X. Guo, C. Q. Tang and R. Z. Yuan: ‘Grain boundary ionic conduction in zirconia-based solid electrolyte with alumina addition’, J. Eur. Ceram. Soc., 1995, 15, 25–32. doi: 10.1016/0955-2219(95)91296-Z
- T. Carvalho, E. Antunes, J. Calado, F. M. Figueredo and J. R. Frade: ‘Lanthanum oxide as a scavenging agent for zirconia electrolytes', Solid State Ionics, 2012, 225, 484–487. doi: 10.1016/j.ssi.2012.02.037
- Y. H. Cho, P. S. Cho, G. Auchterlonie, D. K. Kim, J. H. Lee, D. Y. Kim, H. M. Park and J. Drennan: ‘Enhancement of grain-boundary conduction in gadolinia-doped ceria by the scavenging of highly resistive siliceous phase’, Acta Mater., 2007, 55, 4807–4815. doi: 10.1016/j.actamat.2007.05.001
- K. Y. Lee, J. H. Lee, H. I. Kim, K. W. Han and J. M. Park: ‘The influence of sintering additives on the lifetime of the heater for sensor application with Al2O3 substrate’, Mater. Lett., 1998, 37, 90–97. doi: 10.1016/S0167-577X(98)00071-8
- D. L. Porter and A. H. Heuer: ‘Microstructural development in MgO-partially stabilized zirconia (Mg-PSZ)’, J. Am. Ceram. Soc., 1979, 62, 298–305. doi: 10.1111/j.1151-2916.1979.tb09484.x
- C. A. Leach: ‘Sintering of magnesium partially stabilized zirconia-behavior of an impurity silicate phase’, Mater. Sci. Tech. Ser., 1987, 3, 321–324. doi: 10.1179/mst.1987.3.5.321
- R. C. Garvie: ‘The thermal conductivity of stabilized zirconia’, J. Mater. Sci., 1976, 11, 1365–1367. doi: 10.1007/BF00545160
- G. A. Slack: ‘Thermal conductivity of MgO, Al2O3, MgAl2O4, and Fe3O4 crystals from 3 to 300°K’, Phys. Rev., 1962, 126, 427. doi: 10.1103/PhysRev.126.427
- I. Suzuki, E. Ohtani and M. Kumazawa: ‘Thermal expansion of modified spinel, BETA-Mg2SiO4’, J. Phys. Earth, 1980, 28, 273–280. doi: 10.4294/jpe1952.28.273